INVESTIGATION OF THE ANTIBIOTIC RESISTANCE: THE CASE OF BUU DIEN GENERAL HOSPITAL IN HO CHI MINH CITY

Objective: In Vietnam, antibiotic resistance has been gained the attention of medical professionals in antibiotic use management. This study aimed to investigate the antibiotic resistance among hospital-acquired infections at Buu Dien General Hospital in Ho Chi Minh City in the period of 01-12/2017. Methods: This cross-sectional descriptive study was conducted on the retrospective data of all antibiograms of bacteria isolated from hospital-acquired infections at Buu Dien General Hospital in Ho Chi Minh City in the period of 01-12/2017 to investigate the antibiotic resistance. Characteristics of antibiotic resistance were described by frequency and percentage of types of bacteria isolated and antibiotics being resistant. Results: A total of 179 isolates were collected during the period 01-12/2017, of which E. coli was the most commonly isolated pathogen (41.3%). The highest prevalent infections were in the skin and mucosa; respiratory tract; and urinary tract (34.6%; 32.4%; and 27.9%). The antibiotic susceptibility testing used 21 types of antibiotics. Among them, S. aureus was 82% resistant to clindamycin and 75% resistant to cefuroxime; the Proteus resistance percentages to amoxicillin/clavulanic, second-generation cephalosporins, ciprofloxacin and fosfomycin varied from 50 to 93%; Pseudomonas was 92% resistant to fosfomycin and 62% resistant to ceftazidime; A. baumannii was resistant to most classes of agents used (50-75%). Both E. coli and Klebsiella were highly resistant to gentamicin, amoxicillin, ciprofloxacin, 2nd and 3rd generation cephalosporin’s. Polymyxin B-resistant Proteus cultures were detected at 67%. Conclusion: The study described the antibiotic resistance situation of hospital-acquired bacteria at the Buu Dien General Hospital from 01-12/2017. This information will aid physicians to select proper antibiotics for their patients in the next period

A Case of Amlodipine Overdose: Role of High Dose Insulin Therapy

Introduction: High dose insulin (HDI) therapy, defined as \u3e 0.5 units/kg/hour, has been postulated to improve hemodynamics in both calcium channel blocker (CCB) and beta-blocker overdose. Proposed benefits of HDI include coronary and systemic vasodilation due to enhancement of nitric oxide synthase activity leading to improved contractility and decreased systemic vascular resistance, respectively. HDI also directly improves cardiac contractility by increasing glucose uptake and improving calcium handling within cardiac cells. We present a case of a patient with amlodipine overdose and her response to HDI therapy. Case presentation: A 52 year old female presented with amlodipine overdose after suicide attempt leading to shock. She received continuous intravenous infusion of regular insulin at a rate of 2 units/kg/hour and epinephrine titrated up to 80 mcg/hour to maintain mean arterial pressure above 65. After several hours, there was concern for worsening hypokalemia so insulin was suspended. Patient subsequently became more hypotensive, requiring further uptitration of epinephrine. When continuous insulin was later restarted, there was an observed immediate improvement in blood pressure. Patient was eventually weaned off of vasopressors, followed by insulin, by day 3. She was downgraded from the ICU on day 5. Conclusion: In patients with CCB overdose, initial management should include fluid resuscitation, calcium supplementation, and early consideration of vasopressors and HDI therapy. Although there are currently no controlled human studies to evaluate the benefits of HDI therapy, this case revealed worsening hypotension upon cessation of therapy followed by rapid improvement in blood pressure when restarting insulin. Based on this observation, HDI therapy may have a prominent role in management of CCB overdose

Pulse-width modulation direct torque control induction motor drive with Kalman filter

The paper deals with application of Kalman filter in induction motor drive using pulse-width modulation direct torque control (PWM-DTC). In the first part, the conventional PWM-DTC drive is described and Kalman filter is utilized to filter components of stator current vector those are assumed to be disturbed by white noise. The second part contains simulation results that are obtained in different cases of load torque, process and measurement noise covariances. The integral time absolute error (ITAE) performance index, undershoot, ripple of important quantities are used to compare the conventional drive structure and proposed drive structure with Kalman filter. The simulation results confirm the expected dynamic response of the proposed structure

A new record of congrid eel, Bathycongrus bleekeri (Congridae) from Vietnam

Three specimens of Bathycongrus bleekeri were collected during the survey in 2015 and 2017. The newly recorded species is described herein, a small, moderately elongate species of Bathycongrus with head and body compressed; vertical fins without black mark; tail slender, attenuated, but not filiform; trunk length 1.2 times greater than head length; teeth small, conical, in about three-four rows on jaws, in a small triangular patch on vomer; 28–29 preanal vertebrae, total of 111–113 vertebrae; 26–28 preanal lateral-line pores. Additional data on the morphology and distribution of the species increases the total number of known species in the family Congridae in Vietnamese waters to twelve

Active fault-tolerance of the unmanned aerial vehicle automatic control systems

This paper presents an introductory overview of principles of the three-layer hierarchy of active fault-tolerance, providing, determination of the fault type with as many details as enough to get recoverable fault reason and failure toleration by flexible redundancy using; the conception of active fault-tolerant control in abnormal modes is described. Developed models and methods of a systematic approach to fault tolerance in the direction of the effective use of the signal, parametric and structural redundancies and selection of parrying tools. Performed experimental researches of the unmanned aerial vehicle (UAV) automatic control systems (ACS)

LAND USE CHANGE AND RELATED PROBLEMS UNDER URBANIZATION IN SUBURBAN AREA OF HANOI CITY (A CASE STUDY OF HOANG LIET COMMUNE, THANH TRI DISTRICT)

Joint Research on Environmental Science and Technology for the Eart

Nonlinear rotordynamics of a drillstring in curved wells: models and numerical techniques

International audienceThe drilling operations for oil or geothermic extraction use a slender structure introduced inside the drill well, hanging from a derrick and driven by a rotary table at the surface. The drilling structure consists in a series of drill-pipes and some heavy pipes at the well bottom. The drilling process involves nonlinear dynamic phenomena such as bit-bounce, stick-slip due to the well-drillstring multi-contacts and the pulsating mud flow. The drillstring vibrations may yield, the rate of penetration decrease, the premature wears and damages of drilling equipment. Many numerical models have been proposed to study the dynamics of drillstring to improve the reliability of drilling operations. However, the numerical models of drilling structures representing several kilometers length require a huge amount of computer memory storage and yield a too long computational time. The reduction technique proposed by Craig-Bampton (CB) has been developed for modelling the nonlinear dynamics of rotating machines to save the computational time but still limited in the context of rotordynamics. The paper focuses on the implementation of the CB method in the case of long drillstring assembly modelled by beam finite elements. The pre-loaded states of the drillstring due to the well curvature, well-structure contacts and fluid-structure interactions are determined and taken into account in the dynamic computation. The drillstring transient dynamics is simulated and the orbital motion of several nodes are analyzed. The result convergence and the reduction of computational time obtained by the CB method are investigated and discussed

CÁ MÚ GIỐNG VÀ BẢO VỆ BÃI GIỐNG Ở ĐẦM THỊ NẠI, VỊNH QUY NHƠN VÀ ĐẦM CÙ MÔNG

The wild grouper fingerling have provided the important seed source for the development of commercial fish farming. Among the wild grouper fingerling collected in the Thi Nai lagoon, Quy Nhon bay (Binh Dinh) and Cu Mong lagoon (Phu Yen), 7 species of grouper have been identified as Banded grouper (Epinephelus amblycephalus), Yellow grouper (E. awoara), Longtooth grouper (E. bruneus), Malabar grouper (E. malabaricus), Sixbar grouper (E. sexfasciatus), Orange-spotted grouper (E. coioides) and grouper (Epinephelus sp.); in which three species of Longtooth grouper, Malabar grouper and Orange-spotted grouper were endangered in Red List Categories Criteria of IUCN as VU and NT. The Malabar grouper seed makes up a high proportion of over 30%. The total length of the juveniles is different between species, ranging from an average of 25.0 mm to 116.82 mm; Orange-spotted grouper is 112.48 mm in total length; four grouper species Banded grouper, Yellow grouper, Longtooth grouper and Malabar grouper are longer than 30 mm in total length with 31.96, 32.23, 33.78 and 33.86 mm respectively. The Sixbar grouper and grouper (Epinephelus sp.) are smaller than 30 mm. The catching of grouper fingerling is distributed in wide area, along the bank, mangroves in the lagoon, along the western shore of the Quy Nhon bay, from Ghenh Rang to the southern part of the coast and along the Cu Mong lagoon (from south to southwest). The production of grouper seed fluctuates irregularly, 3 - 4 million seeds per year for highest yields, alternating with very low yields. The protection of nursing grounds is necessary with the solution of selective catching and limiting artisanal fishing.Cá mú giống khai thác tự nhiên đã cung cấp nguồn giống quan trọng cho việc phát triển nuôi cá thương phẩm. Nguồn cá mú giống khai thác tự nhiên ở vùng đầm Thị Nại, vịnh Quy Nhơn (Bình Định) và đầm Cù Mông (Phú Yên) đã xác định được 7 loài là cá mú chấm vạch (Epinephelus amblycephalus), cá song gio (E. awoara), cá song nâu (E. bruneus), cá mú điểm gai (E. malabaricus), cá mú sau sọc (E. sexfasciatus), cá mú mè (E. coioides) và cá song (Epinephelus sp); trong đó có ba loài là cá song nâu (E. bruneus), cá mú điểm gai (E. malabaricus) và cá mú mè (E. coioides) là những loài được IUCN xếp ở mức nguy cấp bậc VU và NT. Con giống cá mú điểm gai chiếm tỉ lệ khá cao trên 30%. Chiều dài toàn thân trung bình cá giống của các loài khác nhau, từ 25,0 - 116,82 mm; cá mú mè  có chiều dài toàn thân lớn nhất đếm 112,48 mm, ba loài cá mú chấm vạch, cá song gio và cá mú điểm gai có chiều dài lớn hơn 30 mm tưong ứng là 31,96; 32,23; 33,78 và 33,86 mm. Hai loài còn lại là cá mú sáu sọc và cá song đều có kích thước nhỏ hơn 30 mm. Vùng khai thác cá mú giống khá rộng; dọc theo các cồn, dãi cây ngập mặn trong đầm Thị Nại, ven bờ phía bắc lên phía tây của vịnh Quy Nhơn; nơi tập trung khai thác ở ven gần bờ phía tây vịnh, từ Ghềnh Ráng kéo dài vào đến khu vực phía nam và vùng dọc bờ của đầm Cù Mông (từ phía nam đến tây nam). Sản lượng khai thác các mú giống biến động khá thất thường, năm có sản lượng cao lên đến 3 - 4 triệu con/năm, xen kẽ có năm sản lượng rất thấp. Việc bảo vệ bãi giống là cần thiết với các giải pháp khai thác có chọn lọc và hạn chế khai thác tận thu

Synthesis of Cu+^+/bipyridyl Based Complex Towards Dye Sensitized Solar Cell Application

This study aims to synthesize the Cu+/bipyridyl-based complex using Sonogashira cross coupling. The structure of the ligand and the complex were investigated by nuclear magnetic resonance spectroscopy; by single crystal X-ray diffraction and by UV-VIS absorption spectroscopy. The obtained experimental results were in good agreement with the theoretical calculations. The complex is a potential candidate to be the photo sensitizer in dye-sensitized solar cells.

Un schéma d'intégration temporelle pour la réponse transitoire de systèmes mécaniques avec butées de contact

Dans le but de modéliser en temps réel le comportement dynamique en régime transitoire de train tiges de forage confinées dans un puits, il faut utiliser des techniques numériques économes en temps de calcul. Les méthodes d'intégration temporelle pas-à-pas [1], telles que celles de Runge-Kutta (RK), [2, 3, 4] ou de Newmark (NM) [5] sont nécessaires pour calculer la réponse transitoire non linéaire, mais sont coûteuses en temps. Il convient donc d'améliorer leur efficacité. Dans les méthodes de RK, c'est le schéma explicite d'ordre 4 qui est le plus largement répandu. Comme celui-ci exprime l'état actuel du système en fonction de son état précédent, il est donc simple à implémenter. Néanmoins, le pas de temps doit être suffisamment petit pour satisfaire la condition de stabilité. De plus, la taille du système d'équations à résoudre est doublée car le système est décomposé en deux systèmes d'équations différentielles du 1er ordre. Pour les systèmes linéaires, les schémas de NM [5] sont inconditionnellement stables même avec un pas de temps plus grand que celui des schémas explicites. Cependant la nécessité d'inverser les matrices à chaque pas de temps pénalise les temps de calcul. D'autre part, à cause des non-linéarités des systèmes mécaniques, il est usuel d'introduire à chaque pas de temps l'algorithme itératif de Newton-Raphson, (NR) qui impose le traitement délicat des matrices jacobiennes. Afin d'éviter l'appel à NR, une technique approximative est d'affecter au temps i+1 la valeur de la force non linéaire connue au temps i.  D'une façon générale, adapter le pas de temps améliore grandement l'efficacité des schémas numériques, notamment ceux de RK [4] et NM [6, 7]. Le modèle proposé ici, repose sur le schéma de NM à accélération constante qui allie la technique pour s'affranchir de NR et l'algorithme à pas adaptatif calculé utilisé dans [6, 7]. Son efficacité est démontrée en le comparant à d'autres schémas existants dans les cas d'un oscillateur à double butées et de la déflexion d'une poutre avec butée latérale répartie. Remerciements Cette recherche est réalisée dans le cadre de DRILLAB, laboratoire commun à la société DrillScan et le LaMCoS, membre de l'institut Carnot Ingénierie@Lyon. DRILLAB a été fondé grâce au programme de l'ANR Laboratoires communs organismes de recherche publique ? PME/ETI, ANR-15-LCV4-0010. Références [1] Y. M. Xie, An Assessment of time integration schemes for non-linear dynamic equations, J.ournal of Sound and Vibration, 192 , 321-331 (1996) [2] C. Runge, Über die numerische Auflösung von Differentialgleichungen. Math. Ann. 46, 167?178 (1895) [3] Kutta, M. Wilhelm, Beitrag zur näherungsweisen Integration totaler Differentialgleichungen, Zeitschrift für Mathematik und Physik, 46, 435-453 (1901) [4] W. H. Press, S. A. Teukolsky, W. T. Vetterling, B. P. Flannery, Numerical Recipes in Fortran, Cambridge University Press, (1992) [5] N. M. Newmark, A method of computation for structural dynamics, Journal of the Engineering Mechanics Division, ASCE 85, 67-94 (1959) [6] O. C. Zienkiewicz, Y. M. Xie, A simple error estimator and adaptive time stepping procedure for dynamic analysis, Earthquake engineering and structural dynamics, 20, 871-887 (1991) [7] D. Kuhl, E. Ramm, Generalized energy-momentum method for non-linear adaptive shell dynamics, Comput. Methods Appl. Mech.