267 research outputs found
The spatial scale of ozone depletion events derived from an autonomous surface ozone network in coastal Antarctica
To probe the spatial extent of tropospheric ozone depletion events during Antarctic spring, a network of 10 autonomous ozone monitors was established around the Dronning Maud Land sector of Antarctica for a full calendar year. Together with manned stations in the area, the network covered a ~1200 km stretch of coast, as well as a transect ~300 km inland and to ~2000 m above sea level (a.s.l.). Here we present results from the spring period (August to October 2008). While some ozone depletion events were evident at only a single site, implying localised ozone destruction, others were evident across the network. The fact that, on occasions, ozone depletion events were observed at all coastal sites simultaneously, suggests the depleted air mass had a scale of at least 1200 km. As the ozone-poor air was advected from the Weddell Sea sea ice zone, the data imply that large areas over the Weddell Sea sea ice zone are significantly depleted in ozone on occasions during Antarctic spring
Ground-based measurements of tropospheric and stratospheric bromine monoxide above Nairobi (1° S, 36° E)
International audienceGround based observations of stratospheric and tropospheric bromine monoxide, BrO, from a multi axial differential optical absorption spectrometer, MAXDOAS, located at the UNEP/UNON site in Nairobi (1° S, 36° E) are presented for the year 2003. Differences in BrO slant column densities at 90° and 80° solar zenith angle retrieved from the zenith-sky measurements are used to study stratospheric BrO. They show only small variations with season, as expected for the small seasonality in stratospheric Bry and NO2 in this region. A pronounced diurnal variation can be observed, the average value for the morning being 1.3×1014 molecules/cm2 and for the evening 1.5×1014 molecules/cm2. The measurements are compared with simulations from a one-dimensional photochemical stacked box model which is coupled with a radiative transfer model to allow direct comparisons between the observations and the model calculations. In general the model reproduces the measurements very well. The differences in the absolute values are 15% for the evening and 20% for the morning which is within the limits of the combined uncertainties. Both seasonality and diurnal variation are well reproduced by the model. A sensitivity study shows that inclusion of the reaction BrONO2 + O(3P) significantly improves the agreement between model calculations and measurements, indicating an important role of this reaction in the stratosphere near to the equator. Tropospheric BrO columns and profile information is derived from the combined results obtained in the different viewing directions for the average over several clear days. The resulting tropospheric BrO columns are in the range of 4?7.5×1012 molecules/cm2 which is significant but lower than in previous studies at mid and high latitudes. The vertical distribution of the tropospheric BrO peaks at about 3 km indicating the absence of local sources at this high altitude site
Satellite observations of long range transport of a large BrO plume in the Arctic
Ozone Depletion Events (ODE) during polar springtime are a well known phenomenon in the Arctic and Antarctic boundary layer. They are caused by the catalytic destruction of ozone by halogens producing reactive halogen oxides like bromine monoxide (BrO). The key halogen bromine can be rapidly transferred into the gas phase in an autocatalytic process – the so called "Bromine Explosion". However, the exact mechanism, which leads to an initial bromine release as well as the influence of transport and chemical processes on BrO, is still not clearly understood. <br><br> In this study, BrO measurements from the satellite instrument GOME-2 are used together with model calculations with the dispersion model FLEXPART to study an arctic BrO event in March 2007, which could be tracked over several days and a large area. Full BrO activation was observed within one day east of Siberia with subsequent transport to Hudson Bay. The event was linked to a cyclone with very high surface wind speeds, which could have been involved in the production and lifting of aerosols or blowing snow. Considering the short life time of BrO, transported aerosols or snow can also provide the surface for BrO recycling within the plume for several days. The evolution of the BrO plume could be reproduced by FLEXPART simulations of a passive tracer indicating that the activated air mass was transported all the way from Siberia to Hudson Bay. To localise the most probable transport height, model runs initialised in different heights have been performed showing similar transport patterns throughout the troposphere but best agreement with the measurements between the surface and 3 km. The influence of changes in tropopause height on measured BrO values has been considered, but cannot completely explain the observed high BrO values. Backward trajectories from the area of BrO initialisation show upward lifting from the surface up to 3 km and no indication for intrusion of stratospheric air. These observations are consistent with a scenario in which bromine in the air mass was activated on the surface within the cyclone, lifted upwards and transported over several thousand kilometres to Hudson Bay
New Developments in the SCIAMACHY Level 2 Ground Processor Towards Version 7
SCIAMACHY (SCanning Imaging Absorption spectroMeter for Atmospheric ChartographY) aboard ESA’s
environmental satellite ENVISAT observed the Earth’s atmosphere in limb, nadir, and solar/lunar occultation
geometries covering the UV-Visible to NIR spectral range. It is a joint project of Germany, the Netherlands and
Belgium and was launched in February 2002. SCIAMACHY doubled its originally planned in-orbit lifetime
of five years before the communication to ENVISAT was severed in April 2012, and the mission entered its
post-operational phase.
In order to preserve the best quality of the outstanding data recorded by SCIAMACHY, data processors are still
being updated. This presentation will highlight three new developments that are currently being incorporated into
the forthcoming Version 7 of ESA’s operational Level 2 processor:
1. Tropospheric BrO, a new retrieval based on the scientific algorithm of (Theys et al., 2011). This algorithm had originally been developed for the GOME-2 sensor and was later adapted for SCIAMACHY.
2. Improved cloud flagging using limb measurements (Liebing, 2015). Limb cloud flags are already part of
the SCIAMACHY L2 product. They are currently calculated employing the scientific algorithm developed by
(Eichmann et al., 2015). Clouds are categorized into four types: water, ice, polar stratospheric and noctilucent
clouds. High atmospheric aerosol loadings, however, often lead to spurious cloud flags, when aerosols had been
misidentified as clouds. The new algorithm will better discriminate between aerosol and clouds. It will also have a
higher sensitivity w.r.t. thin clouds.
3. A new, future-proof file format for the level 2 product based on NetCDF. The data format will be aligned and harmonized with other missions, particularly GOME and Sentinels. The final concept for the new format is still under discussion within the SCIAMACHY Quality Working Group
A global catalogue of large SO \u3c inf\u3e 2 sources and emissions derived from the Ozone Monitoring Instrument
Sulfur dioxide (SO2) measurements from the Ozone Monitoring Instrument (OMI) satellite sensor processed with the new principal component analysis (PCA) algorithm were used to detect large point emission sources or clusters of sources. The total of 491 continuously emitting point sources releasing from about 30 kt yr-1 to more than 4000 kt yr-1 of SO2 per year have been identified and grouped by country and by primary source origin: volcanoes (76 sources); power plants (297); smelters (53); and sources related to the oil and gas industry (65). The sources were identified using different methods, including through OMI measurements themselves applied to a new emission detection algorithm, and their evolution during the 2005-2014 period was traced by estimating annual emissions from each source. For volcanic sources, the study focused on continuous degassing, and emissions from explosive eruptions were excluded. Emissions from degassing volcanic sources were measured, many for the first time, and collectively they account for about 30 % of total SO2 emissions estimated from OMI measurements, but that fraction has increased in recent years given that cumulative global emissions from power plants and smelters are declining while emissions from oil and gas industry remained nearly constant. Anthropogenic emissions from the USA declined by 80 % over the 2005-2014 period as did emissions from western and central Europe, whereas emissions from India nearly doubled, and emissions from other large SO2-emitting regions (South Africa, Russia, Mexico, and the Middle East) remained fairly constant. In total, OMI-based estimates account for about a half of total reported anthropogenic SO2 emissions; the remaining half is likely related to sources emitting less than 30 kt yr-1 and not detected by OMI
The 2019 Raikoke volcanic eruption - Part 1: Dispersion model simulations and satellite retrievals of volcanic sulfur dioxide
Abstract. Volcanic eruptions can cause significant disruption to society, and numerical models are crucial for forecasting the dispersion of erupted material. Here we assess the skill and limitations of the Met Office's Numerical Atmospheric-dispersion Modelling Environment (NAME) in simulating the dispersion of the sulfur dioxide (SO2) cloud from the 21–22 June 2019 eruption of the Raikoke volcano (48.3∘ N, 153.2∘ E). The eruption emitted around 1.5±0.2 Tg of SO2, which represents the largest volcanic emission of SO2 into the stratosphere since the 2011 Nabro eruption. We simulate the temporal evolution of the volcanic SO2 cloud across the Northern Hemisphere (NH) and compare our model simulations to high-resolution SO2 measurements from the TROPOspheric Monitoring Instrument (TROPOMI) and the Infrared Atmospheric Sounding Interferometer (IASI) satellite SO2 products. We show that NAME accurately simulates the observed location and horizontal extent of the SO2 cloud during the first 2–3 weeks after the eruption but is unable, in its standard configuration, to capture the extent and precise location of the highest magnitude vertical column density (VCD) regions within the observed volcanic cloud. Using the structure–amplitude–location (SAL) score and the fractional skill score (FSS) as metrics for model skill, NAME shows skill in simulating the horizontal extent of the cloud for 12–17 d after the eruption where VCDs of SO2 (in Dobson units, DU) are above 1 DU. For SO2 VCDs above 20 DU, which are predominantly observed as small-scale features within the SO2 cloud, the model shows skill on the order of 2–4 d only. The lower skill for these high-SO2-VCD regions is partly explained by the model-simulated SO2 cloud in NAME being too diffuse compared to TROPOMI retrievals. Reducing the standard horizontal diffusion parameters used in NAME by a factor of 4 results in a slightly increased model skill during the first 5 d of the simulation, but on longer timescales the simulated SO2 cloud remains too diffuse when compared to TROPOMI measurements. The skill of NAME to simulate high SO2 VCDs and the temporal evolution of the NH-mean SO2 mass burden is dominated by the fraction of SO2 mass emitted into the lower stratosphere, which is uncertain for the 2019 Raikoke eruption. When emitting 0.9–1.1 Tg of SO2 into the lower stratosphere (11–18 km) and 0.4–0.7 Tg into the upper troposphere (8–11 km), the NAME simulations show a similar peak in SO2 mass burden to that derived from TROPOMI (1.4–1.6 Tg of SO2) with an average SO2 e-folding time of 14–15 d in the NH. Our work illustrates how the synergy between high-resolution satellite retrievals and dispersion models can identify potential limitations of dispersion models like NAME, which will ultimately help to improve dispersion modelling efforts of volcanic SO2 clouds.
</jats:p
Intercomparison of Metop-A SO2 measurements during the 2010- 2011 Icelandic eruptions
The European Space Agency project Satellite Monitoring of Ash and Sulphur Dioxide for the mitigation of Aviation
Hazards, was introduced after the eruption of the Icelandic volcano Eyjafjallajökull in the spring of 2010
to facilitate the development of an optimal EndtoEnd
System for Volcanic Ash Plume Monitoring and Prediction.
The Eyjafjallajökull plume drifted towards Europe and caused major disruptions of European air traffic for
several weeks affecting the everyday life of millions of people. The limitations in volcanic plume monitoring and
prediction capabilities gave birth to this observational system which is based on comprehensive satellitederived
ash plume and sulphur dioxide [SO2] level estimates, as well as a widespread validation using supplementary
satellite, aircraft and groundbased
measurements. Intercomparison
of the volcanic total SO2 column and
plume height observed by GOME2/
MetopA
and IASI/MetopA
are shown before, during and after the Eyjafjallajökull
2010 eruptions as well as for the 2011 GrÃmsvötn eruption. Colocated
groundbased
Brewer Spectrophotometer
data extracted from the World Ozone and Ultraviolet Radiation Data Centre for de Bilt, the Netherlands,
are also compared to the different satellite estimates. Promising agreement is found for the two different
types of instrument for the SO2 columns with linear regression coefficients ranging around from 0.64 when
comparing the different instruments and 0.85 when comparing the two different IASI algorithms. The agreement
for the plume height is lower, possibly due to the major differences between the height retrieval part of the
GOME2 and IASI algorithms. The comparisons with the Brewer groundbased
station in de Bilt, The Netherlands
show good qualitative agreement for the peak of the event however stronger eruptive signals are required
for a longer quantitative comparison
Single-Nucleus RNA-Seq Is Not Suitable for Detection of Microglial Activation Genes in Humans
Single-nucleus RNA sequencing (snRNA-seq) is used as an alternative to single-cell RNA-seq, as it allows transcriptomic profiling of frozen tissue. However, it is unclear whether snRNA-seq is able to detect cellular state in human tissue. Indeed, snRNA-seq analyses of human brain samples have failed to detect a consistent microglial activation signature in Alzheimer's disease. Our comparison of microglia from single cells and single nuclei of four human subjects reveals that, although most genes show similar relative abundances in cells and nuclei, a small population of genes (∼1%) is depleted in nuclei compared to whole cells. This population is enriched for genes previously implicated in microglial activation, including APOE, CST3, SPP1, and CD74, comprising 18% of previously identified microglial-disease-associated genes. Given the low sensitivity of snRNA-seq to detect many activation genes, we conclude that snRNA-seq is not suited for detecting cellular activation in microglia in human disease
Snow-sourced bromine and its implications for polar tropospheric ozone
In the last two decades, significant depletion of boundary layer ozone (ozone depletion events, ODEs) has been observed in both Arctic and Antarctic spring. ODEs are attributed to catalytic destruction by bromine radicals (Br plus BrO), especially during bromine explosion events (BEs), when high concentrations of BrO periodically occur. However, neither the exact source of bromine nor the mechanism for sustaining the observed high BrO concentrations is completely understood. Here, by considering the production of sea salt aerosol from snow lying on sea ice during blowing snow events and the subsequent release of bromine, we successfully simulate the BEs using a global chemistry transport model. We find that heterogeneous reactions play an important role in sustaining a high fraction of the total inorganic bromine as BrO. We also find that emissions of bromine associated with blowing snow contribute significantly to BrO at mid-latitudes. Modeled tropospheric BrO columns generally compare well with the tropospheric BrO columns retrieved from the GOME satellite instrument (Global Ozone Monitoring Experiment). The additional blowing snow bromine source, identified here, reduces modeled high latitude lower tropospheric ozone amounts by up to an average 8% in polar spring
Global observations of tropospheric BrO columns using GOME-2 satellite data
Measurements from the GOME-2 satellite instrument have been analyzed for tropospheric BrO using a residual technique that combines measured BrO columns and estimates of the stratospheric BrO content from a climatological approach driven by O<sub>3</sub> and NO<sub>2</sub> observations. Comparisons between the GOME-2 results and BrO vertical columns derived from correlative ground-based and SCIAMACHY nadir observations, present a good level of consistency. We show that the adopted technique enables separation of stratospheric and tropospheric fractions of the measured total BrO columns and allows quantitative study of the BrO plumes in polar regions. While some satellite observed plumes of enhanced BrO can be explained by stratospheric descending air, we show that most BrO hotspots are of tropospheric origin, although they are often associated to regions with low tropopause heights as well. Elaborating on simulations using the <i>p</i>-TOMCAT tropospheric chemical transport model, this result is found to be consistent with the mechanism of bromine release through sea salt aerosols production during blowing snow events. No definitive conclusion can be drawn however on the importance of blowing snow sources in comparison to other bromine release mechanisms. Outside polar regions, evidence is provided for a global tropospheric BrO background with column of 1–3 &times; 10<sup>13</sup> molec cm<sup>&minus;2</sup>, consistent with previous estimates
- …