Multiple-exciton generation in lead selenide nanorod solar cells with external quantum efficiencies exceeding 120.

Multiple-exciton generation-a process in which multiple charge-carrier pairs are generated from a single optical excitation-is a promising way to improve the photocurrent in photovoltaic devices and offers the potential to break the Shockley-Queisser limit. One-dimensional nanostructures, for example nanorods, have been shown spectroscopically to display increased multiple exciton generation efficiencies compared with their zero-dimensional analogues. Here we present solar cells fabricated from PbSe nanorods of three different bandgaps. All three devices showed external quantum efficiencies exceeding 100% and we report a maximum external quantum efficiency of 122% for cells consisting of the smallest bandgap nanorods. We estimate internal quantum efficiencies to exceed 150% at relatively low energies compared with other multiple exciton generation systems, and this demonstrates the potential for substantial improvements in device performance due to multiple exciton generation.NJLKD thanks the Cambridge Commonwealth European and International Trust, Cambridge Australian Scholarships and Mr Charles K Allen for financial support. MLB thanks the German National Academic Foundation (“Studienstiftung”) for financial support. MT thanks the Gates Cambridge Trust, EPSRC and Winton Programme for Sustainability for financial support. F.W.R.R. gratefully thanks financial support from CNPq [Grant number 246050/2012-8]. C.D. acknowledges financial support from the EU [Grant number 312483 ESTEEM2]. This work was supported by the EPSRC [Grant numbers EP/M005143/1, EP/G060738/1, EP/G037221/1] and the ERC [Grant number 259619 PHOTO-EM].This is the final version of the article. It first appeared from Nature Publishing Group via http://dx.doi.org/10.1038/ncomms925

Enhancing photoluminescence yields in lead halide perovskites by photon recycling and light out-coupling

In lead halide perovskite solar cells, there is at least one recycling event of electron-hole pair to photon to electron-hole pair at open circuit under solar illumination. This can lead to a significant reduction in the external photoluminescence yield from the internal yield. Here we show that, for an internal yield of 70%, we measure external yields as low as 15% in planar films, where light out-coupling is inefficient, but observe values as high as 57% in films on textured substrates that enhance out-coupling. We analyse in detail how externally measured rate constants and photoluminescence efficiencies relate to internal recombination processes under photon recycling. For this, we study the photo-excited carrier dynamics and use a rate equation to relate radiative and non-radiative recombination events to measured photoluminescence efficiencies. We conclude that the use of textured active layers has the ability to improve power conversion efficiencies for both LEDs and solar cells.We acknowledge financial support from the Engineering and Physical Sciences Research Council of the U.K. (EPSRC). J.M.R. and M.T. thank the Winton Programme for the Physics of Sustainability (University of Cambridge). L.M.P.-O. thanks the Cambridge Home European Scheme for financial support. L.M.P.-O. and J.P.H.R. also thank the Nano Doctoral Training Center (NanoDTC) of the EPSRC for financial support. M.A.-J. thanks Nyak Technology Limited for a PhD scholarship. F.D. acknowledges funding from a Herchel Smith Research Fellowship

Resonant energy transfer of triplet excitons from pentacene to PbSe nanocrystals.

The efficient transfer of energy between organic and inorganic semiconductors is a widely sought after property, but has so far been limited to the transfer of spin-singlet excitons. Here we report efficient resonant-energy transfer of molecular spin-triplet excitons from organic semiconductors to inorganic semiconductors. We use ultrafast optical absorption spectroscopy to track the dynamics of triplets, generated in pentacene through singlet exciton fission, at the interface with lead selenide (PbSe) nanocrystals. We show that triplets transfer to PbSe rapidly (<1 ps) and efficiently, with 1.9 triplets transferred for every photon absorbed in pentacene, but only when the bandgap of the nanocrystals is close to resonance (±0.2 eV) with the triplet energy. Following triplet transfer, the excitation can undergo either charge separation, allowing photovoltaic operation, or radiative recombination in the nanocrystal, enabling luminescent harvesting of triplet exciton energy in light-emitting structures.This is the author's accepted manuscript and will be under embargo until the 5th of April 2015. The final version is published by NPG in Nature Materials here: http://www.nature.com/nmat/journal/v13/n11/full/nmat4093.html

Triplet diffusion in singlet exciton fission sensitized pentacene solar cells

Singlet fission sensitized photovoltaics have the potential to surpass the Shockley-Queisser limit for a single-junction structure. We investigate the dynamics of triplet excitons resulting from singlet fission in pentacene and their ionization at a C60 heterojunction. We model the generation and diffusion of excitons to predict the spectral response. We find the triplet diffusion length in polycrystalline pentacene to be 40 nm. Poly(3-hexylthiophene) between the electrode and pentacene works both to confine triplet excitons and also to transfer photogenerated singlet excitons into pentacene with 30% efficiency. The lower bound for the singlet fission quantum efficiency in pentacene is 180 ± 15%

Efficient singlet exciton fission in pentacene prepared from a soluble precursor

Carrier multiplication using singlet exciton fission (SF) to generate a pair of spin-triplet excitons from a single optical excitation has been highlighted as a promising approach to boost the photocurrent in photovoltaics (PVs) thereby allowing PV operation beyond the Shockley-Queisser limit. The applicability of many efficient fission materials, however, is limited due to their poor solubility. For instance, while acene-based organics such as pentacene (Pc) show high SF yields (up to 200%), the plain acene backbone renders the organic molecule insoluble in common organic solvents. Previous approaches adding solubilizing side groups such as bis(tri-$\textit{iso}$-propylsilylethynyl) to the Pc core resulted in low vertical carrier mobilities due to reduction of the transfer integrals via steric hindrance, which prevented high efficiencies in PVs. Here we show how to achieve good solubility while retaining the advantages of molecular Pc by using a soluble precursor route. The precursor fully converts into molecular Pc through thermal removal of the solubilizing side groups upon annealing above 150 °C in the solid state. The annealed precursor shows small differences in the crystallinity compared to evaporated thin films of Pc, indicating that the Pc adopts the bulk rather than surface polytype. Furthermore, we identify identical SF properties such as sub-100 fs fission time and equally long triplet lifetimes in both samples.M.T. thanks the Gates Cambridge Trust and the Winton Programme for the Physics of Sustainability for funding. A.H.K. acknowledges the Cambridge Nehru Bursary, the Cambridge Bombay Society, a Trinity-Henry Barlow- and Haidar Scholarship as well as Rana Denim Pvt. Ltd. for financial support. K.B. and J.N. would like to thank Dr. Tom Arnold and Jakub Rozboril for assistance during the beam time at Diamond Light Source. Financial support for K.B. from Diamond Light Source, Swiss Light Source, and the German Research Foundation (Grant No. BR 4869/1-1) is gratefully acknowledged. M.L.B. is a research fellow of Christ’s College, Cambridge. This work was supported by the Engineering and Physical Sciences Research Council (Grant Nos. EP/M005143/1, EP/G060738/1 and Cambridge NanoDTC EP/G037221/1, EP/L015978/1)

A Silicon-Singlet Fission Tandem Solar Cell Exceeding 100% External Quantum Efficiency with High Spectral Stability.

After 60 years of research, silicon solar cell efficiency saturated close to the theoretical limit, and radically new approaches are needed to further improve the efficiency. The use of tandem systems raises this theoretical power conversion efficiency limit from 34% to 45%. We present the advantageous spectral stability of using voltage-matched tandem solar cells with respect to their traditional series-connected counterparts and experimentally demonstrate how singlet fission can be used to produce simple voltage-matched tandems. Our singlet fission silicon-pentacene tandem solar cell shows efficient photocurrent addition. This allows the tandem system to benefit from carrier multiplication and to produce an external quantum efficiency exceeding 100% at the main absorption peak of pentacene.This work is part of the research programme of the Netherlands Organisation for Scientific Research (NWO). The authors acknowledge financial support from the Engineering and Physical Sciences Research Council of the UK (EPSRC) and King Abdulaziz City for Science and Technology (KACST). LMPO acknowledges the Cambridge Home European Scholarship Scheme (CHESS). MT acknowledges the Gates Cambridge Trust and the Winton Program for the Physics of Sustainability

Photon Reabsorption in Mixed CsPbCl3_{3}:CsPbI3_{3} Perovskite Nanocrystal Films for Light-Emitting Diodes

Cesium lead halide nanocrystals, CsPbX$_{3}$ (X = Cl, Br, I), exhibit photoluminescence quantum efficiencies approaching 100% without the core-shell structures usually used in conventional semiconductor nanocrystals. These high photoluminescence efficiencies make these crystals ideal candidates for light-emitting diodes (LEDs). However, because of the large surface area to volume ratio, halogen exchange between perovskite nanocrystals of different compositions occurs rapidly, which is one of the limiting factors for white-light applications requiring a mixture of different crystal compositions to achieve a broad emission spectrum. Here, we use mixtures of chloride and iodide CsPbX$_{3}$ (X = Cl, I) perovskite nanocrystals where anion exchange is significantly reduced. We investigate samples containing mixtures of perovskite nanocrystals with different compositions and study the resulting optical and electrical interactions. We report excitation transfer from CsPbCl$_{3}$ to CsPbI$_{3}$ in solution and within a poly(methyl methacrylate) matrix via photon reabsorption, which also occurs in electrically excited crystals in bulk heterojunction LEDs.N.J.L.K.D. thanks the Cambridge Commonwealth European and International Trust, Cambridge Australian Scholarships, and Charles K. Allen for financial support. M.T. thanks the Gates Cambridge Trust, EPSRC, and the Winton Programme for the Physics of Sustainability for financial support. J.R. thanks the Cambridge Commonwealth European and International Trust, EPSRC and the Winton Programme for the Physics of Sustainability for financial support. E.P.B. thanks the EPSRC Centre for Doctoral Training: New and Sustainable Photovoltaics. R.D.L. thanks the EPSRC for funding. S.M.M. acknowledges competitive research funding from King Abdullah University of Science and Technology (KAUST). F.W.R.R. gratefully thanks financial support from CNPq Grant No. 246050/2012-8. F.W.R.R. and C.D. acknowledge funding from the ERC under Grant No. 259619 PHOTO-EM. C.D. acknowledges financial support from the EU under Grant No. 312483 ESTEEM2. F.D. is thankful for the Herchel Smith fellowship. This work was supported by the EPSRC (Grant Nos. EP/M005143/1, EP/G060738/1, and EP/G037221/1)

Dynamics of Singlet Fission and Electron Injection in Self-Assembled Acene Monolayers on Titanium Dioxide

We employ a combination of linear spectroscopy, electrochemistry, and transient absorption spectroscopy to characterize the interplay between electron transfer and singlet fission dynamics in polyacene-based dyes attached to nanostructured TiO2. For triisopropyl silylethynyl (TIPS)-pentacene, we find that the singlet fission time constant increases to 6.5 ps on a nanostructured TiO2 surface relative to a thin film time constant of 150 fs, and that triplets do not dissociate after they are formed. In contrast, TIPS-tetracene singlets quickly dissociate in 2 ps at the molecule/TiO2 interface, and this dissociation outcompetes the relatively slow singlet fission process. The addition of an alumina layer slows down electron injection, allowing the formation of triplets from singlet fission in 40 ps. However, the triplets do not inject electrons, which is likely due to a lack of sufficient driving force for triplet dissociation. These results point to the critical balance required between efficient singlet fission and appropriate energetics for interfacial charge transfer