Remote characterization of the rheological properties of sludges and slurries - Preliminary investigations into a novel in situ sensor

Multiphase process design and optimization often depends upon the rheological properties of sludges and slurries. In practice the task of determining these important properties is usually carried out by removing small samples from a process line or process unit and performing tests with proprietary bench-top analysers near to site or at a remote laboratory. Sampling will remain an important procedure in industrial processes, but there is also a strong case for augmenting the routine information obtained using an in situ sensor, as suggested below. Sampling protocols can result in extensive turnaround periods from sample collection to the generation of results. The delay can have an effect on a variety of factors such as product quality, process operability and efficiency. Sampling of toxic or radioactive material can prove an even greater challenge to minimize human involvement. Removal often changes the rheology of a specimen, and might lead to incorrect conclusions being drawn about the condition of a sludge. Sludge and slurry in a containment suffers a gravitational gradient, so that a removed sample should be paired with its location, particularly in the vertical dimension. Sludge or slurry removed from a duct or from siphoning tubes suffers a velocity gradient such that lighter fractions are preferentially represented in the sample, causing an underestimate of coarser particles. Many more data points can be collected by a remote instrument, improving the sampling statistics of the measurement. This paper presents results of an investigation using a small piezo-electric driven AT-cut quartz crystal to measure changes in suspension stability. Mono-dispersed silica suspensions were prepared in several different chemical environments, with the conditions chosen from examination of the zeta potential and sedimentation data. The study shows that by varying the suspension stability, the resonating frequency of a 5 MHz AT-cut quartz silica crystal significantly deviates as the amplitude of oscillation is increased for a coagulated suspension, while remaining unchanged for a dispersed suspension

Methods for managing Marine Protected Areas: options for establishing and managing a marine protected area system in the UK. Report to Natural England

This document presents a review of the available literature concerning management arrangements for Marine Protected Areas (MPAs) in the UK, Europe, and around the world with the object of providing guidance for future management of MPAs, especially European Marine Sites (EMSs), in the UK. This is partly to support the development of effective legislation for UK MPAs through the Marine Bill process, but more broadly to assist UK marine nature conservation and resource management agencies to manage their sites more effectively and to meet the agreed OSPAR goals for a network of well managed marine protected areas to be in place over the next several years. The report follows on from the directions provided in the UK government’s “Maritime State of Nature Report” (Covey and Laffoley 2002) particularly: areas free of exploitation, new or revised legislation and ecologically meaningful management (ibid page 8)

A meta-analytic review of stand-alone interventions to improve body image

Objective Numerous stand-alone interventions to improve body image have been developed. The present review used meta-analysis to estimate the effectiveness of such interventions, and to identify the specific change techniques that lead to improvement in body image. Methods The inclusion criteria were that (a) the intervention was stand-alone (i.e., solely focused on improving body image), (b) a control group was used, (c) participants were randomly assigned to conditions, and (d) at least one pretest and one posttest measure of body image was taken. Effect sizes were meta-analysed and moderator analyses were conducted. A taxonomy of 48 change techniques used in interventions targeted at body image was developed; all interventions were coded using this taxonomy. Results The literature search identified 62 tests of interventions (N = 3,846). Interventions produced a small-to-medium improvement in body image (d+ = 0.38), a small-to-medium reduction in beauty ideal internalisation (d+ = -0.37), and a large reduction in social comparison tendencies (d+ = -0.72). However, the effect size for body image was inflated by bias both within and across studies, and was reliable but of small magnitude once corrections for bias were applied. Effect sizes for the other outcomes were no longer reliable once corrections for bias were applied. Several features of the sample, intervention, and methodology moderated intervention effects. Twelve change techniques were associated with improvements in body image, and three techniques were contra-indicated. Conclusions The findings show that interventions engender only small improvements in body image, and underline the need for large-scale, high-quality trials in this area. The review identifies effective techniques that could be deployed in future interventions

Assessing Risk in Focal Arboviral Infections: Are We Missing the Big or Little Picture?

Focal arboviral infections affecting a subset of the overall population present an often overlooked set of challenges in the assessment and reporting of risk and the detection of spatial patterns. Our objective was to assess the variation in risk when using different at-risk populations and geographic scales for the calculation of incidence risk and the detection of geographic hot-spots of infection. We explored these variations using a pediatric arbovirus, La Crosse virus (LACV), as our model.Descriptive and cluster analyses were performed on probable and confirmed cases of LACV infections reported to the Tennessee Department of Health from 1997 to 2006, using three at-risk populations (the total population, the population 18 years and younger, and the population 15 years and younger) and at two geographic levels (county and census tract) to assess the variation in incidence risk and to investigate evidence of clustering using both global and local spatial statistics. We determined that the most appropriate at-risk population to calculate incidence risk and to assess the evidence of clustering was the population 15 years and younger. Based on our findings, the most appropriate geographical level to conduct spatial analyses and report incidence risk is the census tract level. The incidence risk in the population 15 years and younger at the county level ranged from 0 to 226.5 per 100,000 persons (median 41.5) in those counties reporting cases (n = 14) and at the census tract level it ranged from 50.9 to 673.9 per 100,000 persons (median 126.7) in those census tracts reporting cases (n = 51). To our knowledge, this is the highest reported incidence risk for this population at the county level for Tennessee and at the census tract level nationally.The results of this study indicate the possibility of missing disease clusters resulting from performing incidence risk investigations of focal diseases using inappropriate at-risk populations and/or at large geographic scales. Improved disease surveillance and health planning will result through the use of well defined at-risk populations and the use of appropriate geographic scales for the analysis and reporting of diseases. The finding of a high incidence risk of LACV infections in eastern Tennessee demonstrates that the vast majority of these infections continue to be under-diagnosed and/or underreported in this region. Persistent prevention and surveillance efforts will be required to reduce exposure to infectious vectors and to detect new cases of infection in this region. Application of this study's observations in future investigations will enhance the quantification of incidence risk and the identification of high-risk groups within the population

Restriction endonuclease TseI cleaves A:A and T:T mismatches in CAG and CTG repeats.

The type II restriction endonuclease TseI recognizes the DNA target sequence 5'-G^CWGC-3' (where W = A or T) and cleaves after the first G to produce fragments with three-base 5'-overhangs. We have determined that it is a dimeric protein capable of cleaving not only its target sequence but also one containing A:A or T:T mismatches at the central base pair in the target sequence. The cleavage of targets containing these mismatches is as efficient as cleavage of the correct target sequence containing a central A:T base pair. The cleavage mechanism does not apparently use a base flipping mechanism as found for some other type II restriction endonuclease recognizing similarly degenerate target sequences. The ability of TseI to cleave targets with mismatches means that it can cleave the unusual DNA hairpin structures containing A:A or T:T mismatches formed by the repetitive DNA sequences associated with Huntington's disease (CAG repeats) and myotonic dystrophy type 1 (CTG repeats)

Multiscale correlative tomography: an investigation of creep cavitation in 316 stainless steel

Creep cavitation in an ex-service nuclear steam header Type 316 stainless steel sample is investigated through a multiscale tomography workflow spanning eight orders of magnitude, combining X-ray computed tomography (CT), plasma focused ion beam (FIB) scanning electron microscope (SEM) imaging and scanning transmission electron microscope (STEM) tomography. Guided by microscale X-ray CT, nanoscale X-ray CT is used to investigate the size and morphology of cavities at a triple point of grain boundaries. In order to understand the factors affecting the extent of cavitation, the orientation and crystallographic misorientation of each boundary is characterised using electron backscatter diffraction (EBSD). Additionally, in order to better understand boundary phase growth, the chemistry of a single boundary and its associated secondary phase precipitates is probed through STEM energy dispersive X-ray (EDX) tomography. The difference in cavitation of the three grain boundaries investigated suggests that the orientation of grain boundaries with respect to the direction of principal stress is important in the promotion of cavity formation

An invitation to grieve: reconsidering critical incident responses by support teams in the school setting

This paper proposes that consideration could be given to an invitational intervention rather than an expectational intervention when support personnel respond to a critical incident in schools. Intuitively many practitioners know that it is necessary for guidance/counselling personnel to intervene in schools in and following times of trauma. Most educational authorities in Australia have mandated the formulation of a critical incident intervention plan. This paper defines the term critical incident and then outlines current intervention processes, discussing the efficacy of debriefing interventions. Recent literature suggests that even though it is accepted that a planned intervention is necessary, there is scant evidence as to the effectiveness of debriefing interventions in stemming later symptoms of post traumatic stress disorder. The authors of this paper advocate for an expressive therapy intervention that is invitational rather than expectational, arguing that not all people respond to trauma in the same way and to expect that they will need to recall and retell what has happened is most likely a dangerous assumption. A model of invitation using Howard Gardner’s (1983) multiple intelligences is proposed so that students are invited to grieve and understand emotionally what is happening to them following a critical incident

The use of electrochemical sensors for monitoring urban air quality in low-cost, high-density networks

Measurements at appropriate spatial and temporal scales are essential for understanding and monitoring spatially heterogeneous environments with complex and highly variable emission sources, such as in urban areas. However, the costs and complexity of conventional air quality measurement methods means that measurement networks are generally extremely sparse. In this paper we show that miniature, low-cost electrochemical gas sensors, traditionally used for sensing at parts-per-million (ppm) mixing ratios can, when suitably configured and operated, be used for parts-per-billion (ppb) level studies for gases relevant to urban air quality. Sensor nodes, in this case consisting of multiple individual electrochemical sensors, can be low-cost and highly portable, thus allowing the deployment of scalable high-density air quality sensor networks at fine spatial and temporal scales, and in both static and mobile configurations.This work was supported by EPSRC (grant number EP/E002102/1) and the Department for Transport

A randomised controlled trial of laser scanning and casting for the construction of ankle foot orthoses

Study Design: Randomised controlled trial with blinding of orthotists and patients to the construction technique used. Background: Three-dimensional laser scanning has been used for patient measurement for cranial helmets and spinal braces. Ankle foot orthoses are commonly prescribed for children with orthopaedic conditions. This trial sought to compare ankle foot orthoses produced by laser scanning or traditional plaster casting. Objectives: Assessment of the effectiveness and efficiency of using laser scanning to produce AFOs. Methods: A randomised double blind trial comparing fabrication of AFOs from casts or laser scans. Results: The time spent in the rectification and moulding of scanned AFOs was around 50% less than for cast AFOs. A non-significant increase of 9 days was seen in the time to delivery to the patient for LSCAD/CAM. There was a higher incidence of problems with the scan-based AFOs at delivery of the device, but no difference in how long the AFOs lasted. Costs associated with laser scanning were not significantly different from traditional methods of AFO manufacture. Conclusions: Compared with conventional casting techniques laser scan based AFO manufacture neither significantly improved the quality of the final product nor delivered a useful saving in time

Hygiene inspections on passenger ships in Europe - an overview

<p>Abstract</p> <p>Background</p> <p>Hygiene inspections on passenger ships are important for the prevention of communicable diseases. The European Union (EU) countries conduct hygiene inspections on passenger ships in order to ensure that appropriate measures have been taken to eliminate potential sources of contamination which could lead to the spread of communicable diseases. This study was implemented within the framework of the EU SHIPSAN project and it investigates the legislation applied and practices of hygiene inspections of passenger ships in the EU Member States (MS) and European Free Trade Association countries.</p> <p>Methods</p> <p>Two questionnaires were composed and disseminated to 28 countries. A total of 92 questionnaires were completed by competent authorities responsible for hygiene inspections (n = 48) and the creation of legislation (n = 44); response rates were 96%, and 75.9%, respectively.</p> <p>Results</p> <p>Out of the 48 responding authorities responsible for hygiene inspections, a routine programme was used by 19 (39.6%) of these to conduct inspections of ships on national voyages and by 26 (54.2%) for ships on international voyages. Standardised inspection forms are used by 59.1% of the authorities. A scoring inspection system is applied by five (11.6%) of the 43 responding authorities. Environmental sampling is conducted by 84.1% of the authorities (37 out of 44). The inspection results are collected and analysed by 54.5% (24 out of 44) of the authorities, while 9 authorities (20.5%) declared that they publish the results. Inspections are conducted during outbreak investigations by 75% and 70.8% of the authorities, on ships on national and international voyages, respectively. A total of 31 (64.6%) and 39 (81.3%) authorities conducted inspections during complaint investigations on ships on international and on national voyages, respectively. Port-to-port communication between the national port authorities was reported by 35.4% (17 out of 48) of the responding authorities and 20.8% (10 out of 48) of the port authorities of other countries.</p> <p>Conclusion</p> <p>This study revealed a diversity of approaches and practices in the conduct of inspections, differences in the qualifications/knowledge/experience of inspectors, the legislation applied during inspections, and the lack of communication and training among many EU countries. An integrated European inspection programme involving competent expert inspectors in each EU Member States and special training for ship hygiene delivered to crew members and inspectors would help to minimize the risk of communicable diseases. Common inspection tools at a European level for hygiene inspection practices and port-to-port communication are needed.</p