9,239 research outputs found
Recommended from our members
Influence of semicon shields on the dielectric loss of XLPE cables
Dielectric response measurement techniques in both time and frequency domains are studied in order to measure the dielectric loss of XLPE cables, which have very low losses. A high sensitivity transformer ratio bridge system, which can measure loss tangents as low as 10-5, has been developed with the ability to measure these cables. A tuned amplifier was designed to help to extend the frequency range from 200Hz to 20kHz. Different model cables from Borealis AB with different semiconducting materials have been measured in the temperature range 15⁰C to 120⁰C. It is found that the semiconducting layers dominate the dielectric loss in the insulation system of the XLPE cables, when the outer semicon is treated as measuring electrode. In this case, steadily increasing dielectric loss has been measured at higher frequencies. The resistivity of the semiconducting materials was measured, which confirmed that the increasing slope is due to the semiconducting layers. After using conductive tapes to wrap the cable samples, monotonically decreasing losses were measured, corresponding to the actual dielectric frequency response of the XLPE cables. It is concluded that the axial resistance of semiconducting shields have a substantial influence on the dielectric loss of XLPE cables, especially for dielectric response in high frequency range. A device on measuring the loss of such cables is presented
Coherent Thermal Emission from Photonic Nanostructures Composed of TA, W, GE, and HFO2 Thin Films
Combining an understanding of thin films and structure/property relationships, photonic nano-structures were developed in order to affect the spectral and directional radiative properties of coherent thermal emission. The targeted emission range was 2-20 micrometer. Structures with appropriate materials in order to achieve thermal stability were designed and tested. Implementing a Finite Difference Time Domain numerical method, four truncated multilayer resonators were designed to selectively emit at certain transmissive wavelength bands of the atmosphere in 2-20 micrometer. Ellipsometric measurements and models were used in order to extract the optical constants of thin layers of materials chosen for the resonator designs. These values showed significant disagreement with bulk values found in literature and were used to make more accurate theoretical predictions. A Direct Current Magnetron Sputtering technique was used to fabricate the four resonators, W-Ge-W, W-HfO2-W, Ta-Ge-Ta, and Ta-HfO2-Ta, with layer thicknesses of 10-760-145 nm, 10-701-145 nm, 9.6-728-169 nm, and 9.6-301-169 nm, respectively. Reflectance measurements were taken at room temperature and various high temperatures to investigate the thermal stability of the spectral reflectance of the structures. From these reflectance measurements, the W-Ge-W and Ta-Ge-Ta designs proved to hold up the best at higher temperatures
How to protect a wind turbine from lightning
Techniques for reducing the chances of lightning damage to wind turbines are discussed. The methods of providing a ground for a lightning strike are discussed. Then details are given on ways to protect electronic systems, generating and power equipment, blades, and mechanical components from direct and nearby lightning strikes
Recommended from our members
The measurement of very low conductivity and dielectric loss in XLPE cables: A possible method to detect degradation due to thermal aging
The dielectric response of crosslinked polyethylene (XLPE) insulated, miniature power cables, extruded with inner and outer semicons, was measured over the frequency range 10-4 to 104 Hz at temperatures from 20 to 100 °C. A dielectric spectrometer was used for the frequency range 10-4 to 10-2 Hz. A bespoke noise-free power supply was constructed and used to measure the dc conductivity and, using a Fourier transform technique, it was also used to measure the very low dielectric tanδ losses encountered at frequencies of 1 to 100 Hz. Tanδ measurements of <;10-5 were found in this frequency range and attributed to a β-mode dielectric relaxation lying above 100 Hz due to motion of chain segments in the amorphous region and an β-mode relaxation lying below 1 Hz window due to twists of chains in the crystal lamellae. The dc conductivity measurements were consistent with those of the dielectric spectrometer and indicate lower dc conductivities in vacuum degassed cables than have been previously reported for XLPE (less than 10-17 S.m-1). The conduction process is thermally activated with an activation energy of approximately 1.1 eV. Higher conductivities were found for non-degassed cables. A transformer ratio bridge was used for measurements in the range 1 to 10 kHz; loss in this region was shown to be due to the series resistance of the semicon layers. Thermal ageing of the cables at 135 °C for 60 days caused significant increases in the conductivity and tanδ and it is considered that such measurements may be a sensitive way of measuring electrical degradation due to thermal aging
On the chemical composition of L-chondrites
Radiochemical neutron activation analysis of Ag, As, Au, Bi, Co, Cs, Ga, In, Rb, Sb, Te, Tl, and Zn and major element data in 14 L4-6 and 3 LL5 chondrites indicates that the L group is unusually variable and may represent at least 2 subgroups differing in formation history. Chemical trends in the S/Fe rich subgroup support textural evidence indicating late loss of a shock formed Fe-Ni-S melt; the S/Fe poor subgroup seemingly reflects nebular fractionation only. Highly mobile In and Zn apparently reflect shock induced loss from L chondrites. However, contrasting chemical trends in several L chondrite sample sets indicate that these meteorites constitute a more irregular sampling of, or more heterogeneous parent material than do carbonaceous or enstatite chondrites. Data for 15 chondrites suggest higher formation temperatures and/or degrees of shock than for LL5 chondrites
Sudden Death of Entanglement: Classical Noise Effects
When a composite quantum state interacts with its surroundings, both quantum
coherence of individual particles and quantum entanglement will decay. We have
shown that under vacuum noise, i.e., during spontaneous emission, two-qubit
entanglement may terminate abruptly in a finite time [T. Yu and J. H. Eberly,
\prl {93}, 140404 (2004)], a phenomenon termed entanglement sudden death (ESD).
An open issue is the behavior of mixed-state entanglement under the influence
of classical noise. In this paper we investigate entanglement sudden death as
it arises from the influence of classical phase noise on two qubits that are
initially entangled but have no further mutual interaction.Comment: 5 pages, 1 figur
- …