Nanometer-scale Tomographic Reconstruction of 3D Electrostatic Potentials in GaAs/AlGaAs Core-Shell Nanowires

We report on the development of Electron Holographic Tomography towards a versatile potential measurement technique, overcoming several limitations, such as a limited tilt range, previously hampering a reproducible and accurate electrostatic potential reconstruction in three dimensions. Most notably, tomographic reconstruction is performed on optimally sampled polar grids taking into account symmetry and other spatial constraints of the nanostructure. Furthermore, holographic tilt series acquisition and alignment have been automated and adapted to three dimensions. We demonstrate 6 nm spatial and 0.2 V signal resolution by reconstructing various, previously hidden, potential details of a GaAs/AlGaAs core-shell nanowire. The improved tomographic reconstruction opens pathways towards the detection of minute potentials in nanostructures and an increase in speed and accuracy in related techniques such as X-ray tomography

Argon metastable dynamics in a filamentary jet micro-discharge at atmospheric pressure

Space and time resolved concentrations of Ar ($^{3}P_2$) metastable atoms at the exit of an atmospheric pressure radio-frequency micro-plasma jet were measured using tunable diode laser absorption spectroscopy. The discharge features a coaxial geometry with a hollow capillary as an inner electrode and a ceramic tube with metal ring as outer electrode. Absorption profiles of metastable atoms as well as optical emission measurements reveal the dynamics and the filamentary structure of the discharge. The average spatial distribution of Ar metastables is characterized with and without a target in front of the jet, showing that the target potential and therewith the electric field distribution substantially changes the filaments' expansion. Together with the detailed analysis of the ignition phase and the discharge's behavior under pulsed operation, the results give an insight into the excitation and de-excitation mechanisms

CdV2O4: A rare example of a collinear multiferroic spinel

By studying the dielectric properties of the geometrically frustrated spinel CdV2O4, we observe ferroelectricity developing at the transition into the collinear antiferromagnetic ground state. In this multiferroic spinel, ferroelectricity is driven by local magnetostriction and not by the more common scenario of spiral magnetism. The experimental findings are corroborated by ab-initio calculations of the electric polarization and the underlying spin and orbital order. The results point towards a charge rearrangement due to dimerization, where electronic correlations and the proximity to the insulator-metal transition play an important role.Comment: 4+ pages, 3 figure

Ionization by bulk heating of electrons in capacitive radio frequency atmospheric pressure microplasmas

Electron heating and ionization dynamics in capacitively coupled radio frequency (RF) atmospheric pressure microplasmas operated in helium are investigated by Particle in Cell simulations and semi-analytical modeling. A strong heating of electrons and ionization in the plasma bulk due to high bulk electric fields are observed at distinct times within the RF period. Based on the model the electric field is identified to be a drift field caused by a low electrical conductivity due to the high electron-neutral collision frequency at atmospheric pressure. Thus, the ionization is mainly caused by ohmic heating in this "Omega-mode". The phase of strongest bulk electric field and ionization is affected by the driving voltage amplitude. At high amplitudes, the plasma density is high, so that the sheath impedance is comparable to the bulk resistance. Thus, voltage and current are about 45{\deg} out of phase and maximum ionization is observed during sheath expansion with local maxima at the sheath edges. At low driving voltages, the plasma density is low and the discharge becomes more resistive resulting in a smaller phase shift of about 4{\deg}. Thus, maximum ionization occurs later within the RF period with a maximum in the discharge center. Significant analogies to electronegative low pressure macroscopic discharges operated in the Drift-Ambipolar mode are found, where similar mechanisms induced by a high electronegativity instead of a high collision frequency have been identified

Axial light emission and Ar metastable densities in a parallel plate dc micro discharge in steady state and transient regimes

Axial emission profiles in a parallel plate dc micro discharge (feedgas: argon; discharge gap d=1mm; pressure p=10Torr) were studied by means of time resolved imaging with a fast ICCD camera. Additionally, volt-ampere (V-A) characteristics were recorded and Ar* metastable densities were measured by tunable diode laser absorption spectroscopy (TDLAS). Axial emission profiles in the steady state regime are similar to corresponding profiles in standard size discharges (d=1cm, p=1Torr). For some discharge conditions relaxation oscillations are present when the micro discharge switches periodically between low current Townsend-like mode and normal glow. At the same time the axial emission profile shows transient behavior, starting with peak distribution at the anode, which gradually moves towards the cathode during the normal glow. The development of argon metastable densities highly correlates with the oscillating discharge current. Gas temperatures in the low current Townsend-like mode (T= 320-400K) and the high current glow mode (T=469-526K) were determined by the broadening of the recorded spectral profiles as a function of the discharge current.Comment: submitted to Plasma Sources Sci. Techno

Indirect and direct optical transitions in In0.5Ga0.5As/GaP quantum dots

We present a study of self-assembled In0.5Ga0.5As quantum dots on GaP(001) surfaces linking growth parameters with structural, optical, and electronic properties. Quantum dot densities from 5.0 × 107 cm−2 to 1.5 × 1011 cm−2 are achieved. A ripening process during a growth interruption after In0.5Ga0.5As deposition is used to vary the quantum dot size. The main focus of this work lies on the nature of optical transitions which can be switched from low-efficient indirect to high-efficient direct ones through improved strain relief of the quantum dots by different cap layers

Concepts and characteristics of the 'COST Reference Microplasma Jet'

Biomedical applications of non-equilibrium atmospheric pressure plasmas have attracted intense interest in the past few years. Many plasma sources of diverse design have been proposed for these applications, but the relationship between source characteristics and application performance is not well-understood, and indeed many sources are poorly characterized. This circumstance is an impediment to progress in application development. A reference source with well-understood and highly reproducible characteristics may be an important tool in this context. Researchers around the world should be able to compare the characteristics of their own sources and also their results with this device. In this paper, we describe such a reference source, developed from the simple and robust micro-scaled atmospheric pressure plasma jet (μ-APPJ) concept. This development occurred under the auspices of COST Action MP1101 'Biomedical Applications of Atmospheric Pressure Plasmas'. Gas contamination and power measurement are shown to be major causes of irreproducible results in earlier source designs. These problems are resolved in the reference source by refinement of the mechanical and electrical design and by specifying an operating protocol. These measures are shown to be absolutely necessary for reproducible operation. They include the integration of current and voltage probes into the jet. The usual combination of matching unit and power supply is replaced by an integrated LC power coupling circuit and a 5 W single frequency generator. The design specification and operating protocol for the reference source are being made freely available

Trends in biomass, density and diversity of North Sea macrofauna

Total biomass and biomass of large taxonomic groups (polychaetes, molluscs, crustaceans, echinoderms) and species diversity of the macrofauna were determined for almost 200 North Sea stations sampled synoptically by seven vessels during Spring 1986 and for 120 additional stations sampled in earlier years by the Marine Laboratory in Aberdeen. There exists a clear and significant decreasing trend in biomass with latitude, both in total biomass and for the different taxonomic groups. Apart from latitude, sediment composition and chlorophyll a content of the sediment also infuence total biomass and biomass of most groups significantly. Biomass increases consistently in finer sediments and sediments with a higher chlorophyll a content. The same trends are found for the results within laboratories. Some interaction exists, indicating weak laboratory and zonal effects. Diversity, as measured by Hill's diversity index N1 = (exp H′) shows a clear and significant trend with latitude. Towards the north of the North Sea diversity increases considerably. The trend is also found for laboratories separately and is everywhere equally strong. Also longitude and depth show an effect on diversity. Sediment variables have no clear influence on diversity. Other diversity measures show the same trend but are more variable than N1,. Total density tends to increase towards the north, but sediment related variables have a larger influence. Mean individual weight becomes considerably smaller towards the northern part of the North Sea

Growth and structure of In0.5Ga0.5Sb quantum dots on GaP(001)

Stranski-Krastanov (SK) growth of In0.5Ga0.5Sb quantum dots (QDs) on GaP(001) by metalorganic vapor phase epitaxy is demonstrated. A thin GaAs interlayer prior to QD deposition enables QD nucleation. The impact of a short Sb-flush before supplying InGaSb is investigated. QD growth gets partially suppressed for GaAs interlayer thicknesses below 6 monolayers. QD densities vary from 5 × 109 to 2 × 1011 cm−2 depending on material deposition and Sb-flush time. When In0.5Ga0.5Sb growth is carried out without Sb-flush, the QD density is generally decreased, and up to 60% larger QDs are obtained