Magnetorheological landing gear: 2. Validation using experimental data

Aircraft landing gears are subjected to a wide range of excitation conditions with conflicting damping requirements. A novel solution to this problem is to implement semi-active damping using magnetorheological (MR) fluids. In part 1 of this contribution, a methodology was developed that enables the geometry of a flow mode MR valve to be optimized within the constraints of an existing passive landing gear. The device was designed to be optimal in terms of its impact performance, which was demonstrated using numerical simulations of the complete landing gear system. To perform the simulations, assumptions were made regarding some of the parameters used in the MR shock strut model. In particular, the MR fluid's yield stress, viscosity, and bulk modulus properties were not known accurately. Therefore, the present contribution aims to validate these parameters experimentally, via the manufacture and testing of an MR shock strut. The gas exponent, which is used to model the shock strut's nonlinear stiffness, is also investigated. In general, it is shown that MR fluid property data at high shear rates are required in order to accurately predict performance prior to device manufacture. Furthermore, the study illustrates how fluid compressibility can have a significant influence on the device time constant, and hence on potential control strategies

Demonstration and Comparison of Operation of Photomultiplier Tubes at Liquid Argon Temperature

Liquified noble gases are widely used as a target in direct Dark Matter searches. Signals from scintillation in the liquid, following energy deposition from the recoil nuclei scattered by Dark Matter particles (e.g. WIMPs), should be recorded down to very low energies by photosensors suitably designed to operate at cryogenic temperatures. Liquid Argon based detectors for Dark Matter searches currently implement photo multiplier tubes for signal read-out. In the last few years PMTs with photocathodes operating down to liquid Argon temperatures (87 K) have been specially developed with increasing Quantum Efficiency characteristics. The most recent of these, Hamamatsu Photonics Mod. R11065 with peak QE up to about 35%, has been extensively tested within the R&D program of the WArP Collaboration. During these testes the Hamamatsu PMTs showed superb performance and allowed obtaining a light yield around 7 phel/keVee in a Liquid Argon detector with a photocathodic coverage in the 12% range, sufficient for detection of events down to few keVee of energy deposition. This shows that this new type of PMT is suited for experimental applications, in particular for new direct Dark Matter searches with LAr-based experiments

Perfect weddings abroad

Approximately 16% of UK couples are currently married abroad. However, academic or practitioner focused research that explores the complex nature of a couple’s buying preferences or the development of innovative marketing strategies by businesses operating within the weddings abroad niche sector, is almost non-existent. This exploratory paper examines the role and relevance of marketing within the weddings abroad sector. The complex nature of customer needs in this high emotional and involvement experience, are identified and explored. A case study of Perfect Weddings Abroad Ltd highlights distinctive features and characteristics. Social networking and the use of home-workers, with a focus on reassurance and handholding are important tools used to develop relationships with customers. These tools and techniques help increase the tangibility of a weddings abroad package. Clusters of complementary services that are synergistic and provide sources of competitive advantage are identified and an agenda for future research is developed

A Toy Model for Testing Finite Element Methods to Simulate Extreme-Mass-Ratio Binary Systems

Extreme mass ratio binary systems, binaries involving stellar mass objects orbiting massive black holes, are considered to be a primary source of gravitational radiation to be detected by the space-based interferometer LISA. The numerical modelling of these binary systems is extremely challenging because the scales involved expand over several orders of magnitude. One needs to handle large wavelength scales comparable to the size of the massive black hole and, at the same time, to resolve the scales in the vicinity of the small companion where radiation reaction effects play a crucial role. Adaptive finite element methods, in which quantitative control of errors is achieved automatically by finite element mesh adaptivity based on posteriori error estimation, are a natural choice that has great potential for achieving the high level of adaptivity required in these simulations. To demonstrate this, we present the results of simulations of a toy model, consisting of a point-like source orbiting a black hole under the action of a scalar gravitational field.Comment: 29 pages, 37 figures. RevTeX 4.0. Minor changes to match the published versio

Organisational culture of further education colleges delivering higher education business programmes: developing a culture of ‘HEness’ – what next?

This paper draws on the views of lecturers working in and delivering college-based higher education (CBHE) in the UK. There have been numerous works on the culture of higher education in further education (HE in FE). However, as noted by some literati, the culture of further education (FE) is not easy to define, and does not readily lend itself to the incorporation of a higher education (HE) culture. This could be due to the large number of changes FE has had to adopt owing to various government policies. The study comprises 26 in-depth individual interviews conducted at various further education colleges throughout the Yorkshire and Humber region of the UK. Via the use of an interpretivist approach, common themes and word use were extracted from the narratives for analysis. The organisational culture of these further education colleges was relatively easy to define, the word ‘blame’ being one of the common themes. However, when identifying if the individual colleges had a HE culture; this proved more difficult

Landslide susceptibility mapping in North-East Wales

This is an Accepted Manuscript of an article published by Taylor & Francis in Geomatics, Natural Hazards and Risk on 4th October 2011, available online: https://doi.org/10.1080/19475705.2011.600778In North-East Wales, United Kingdom, slope instability is a known environmental hazard which has caused significant damage to the built environment in the recent past. This paper reports on the creation of a digital landslide inventory for North-East Wales and the use of a Geographical Information System (GIS) to create landslide susceptibility models that are applicable to landslide hazard management in the area. The research undertaken has resulted in the most comprehensive landslide inventory of North-East Wales to date, documenting 430 landslides within the area. Landslide susceptibility models created within a GIS using a statistical (multiple logistic regression) approach, divide the landscape of North-East Wales into areas of ‘low’, ‘moderate’ and ‘high’ landslide susceptibility using calculated probability values. These models indicate that 8% of the surface exposure of drift deposits and 12% of the area of solid geology is of high or very high susceptibility to slope instability. Validation tests have demonstrated the accuracy of these models and their potential value in a predictive sense. The digital landslide database and susceptibility models created are readily available to interested stakeholders, and may be useful tools in land-use planning, development of civil contingency plans and as guidance for the insurance industry

Questioning policy, youth participation and lifestyle sports

Young people have been identified as a key target group for whom participation in sport and physical activity could have important benefits to health and wellbeing and consequently have been the focus of several government policies to increase participation in the UK. Lifestyle sports represent one such strategy for encouraging and sustaining new engagements in sport and physical activity in youth groups, however, there is at present a lack of understanding of the use of these activities within policy contexts. This paper presents findings from a government initiative which sought to increase participation in sport for young people through provision of facilities for mountain biking in a forest in south-east England. Findings from qualitative research with 40 young people who participated in mountain biking at the case study location highlight the importance of non-traditional sports as a means to experience the natural environments through forms of consumption which are healthy, active and appeal to their identities. In addition, however, the paper raises questions over the accessibility of schemes for some individuals and social groups, and the ability to incorporate sports which are inherently participant-led into state-managed schemes. Lifestyle sports such as mountain biking involve distinct forms of participation which present a challenge for policy-makers who seek to create and maintain sustainable communities of youth participants