Visualization of scientific arts and some examples of applications

In this paper, implementation and visualization of scientific arts are described using some examples of application in subject research areas, such as sculpture, archeology, fine arts and information aesthetics, which have been discussed through the Scientific Art Session at FLUCOME9, Tallahassee, Florida, 2007-9. In the application to sculpture, stereo visualization techniques, such as anaglyph stereo visualization and integral imaging technique, are introduced to realize the three-dimensional geometry of sculpture to enhance visual impact on the art. The second application is the flow visualization technique for archeology, where the vortices behind the river stones are studied to understand the origin of patterns on Jomon pottery. Interestingly, such vortex patterns also appear in the paintings of fine arts. The third example is the visualization of information aesthetics, where the Web information, such as public media and stock market, are visualized through scientific techniques. These example of visualization of scientific arts provide the present state of the art in interdisciplinary visualization

Effect of maternal cold exposure and nutrient restriction on insulin-like growth factor sensitivity in adipose tissue of newborn sheep

Adipose tissue mass in the newborn is determined in part by insulin-like growth factor (IGF)s, which are dependent on the maternal nutritional and metabolic environment during late gestation. The present study was designed to determine whether maternal cold exposure (CE) commencing in mid gestation could modulate some of the adaptive effects of nutrient restriction in late gestation on adipose tissue endocrine sensitivity in the resulting offspring. Twenty eight pregnant sheep were entered into the study and were either shorn, i.e. cold exposed, from 70 days gestation (term = 147 days), or remained unshorn, and were fed either their total calculated metabolisable energy (ME) requirements for body weight and pregnancy from 110 days gestation or 50% of this amount (n=7 per group). Adipose tissue was sampled from the offspring at one day of age and the mRNA abundance for IGF-I, II their receptors (R) and GH secretagogue receptor-1a (GHSR-1a) were determined. CE mothers produced larger offspring with more perirenal adipose tissue, an adaptation prevented by maternal nutrient restriction. Nutrient restriction in unshorn mothers increased IGF-I and IIR mRNA abundance. The mRNA abundances for IGF-I, II and IIR in adipose tissue were reduced by CE, adaptations independent of maternal food intake, whereas CE plus nutrient restriction increased GHSR-1a mRNA. In conclusion, maternal nutrient restriction with or without CE has very different effects on IGF sensitivity of adipose tissue and may act to ensure adequate fat stores are present in the newborn in the face of very different maternal endocrine and metabolic environments

Slipcasting of MAX phase tubes for nuclear fuel cladding applications

As a proof of concept, tubes of Ti3SiC2 MAX phase were slipcast in order to investigate its potential for the fabrication of fuel cladding for nuclear reactors. A slip consisting of 46% dry weight basis (dwb) water, 4% dwb polyethyleneimine (PEI), 0.5% dwb methylcellulose was used to cast the tubes, which were then sintered for 2 h under vacuum at 1450 °C. Silicon loss was observed at surface which resulted in the formation of TiC. The hoop stress to destruction of the tubes was measured and achieved a maximum of 9.1 ± 2.2 MPa/mm of tube thickness

Laser sintering of electrophoretically deposited (EPD) Ti3SiC2 MAX phase coatings on titanium

Ti 3 SiC 2 was deposited onto titanium substrates using electrophoretic deposition; a 4.3 wt% suspension of Ti 3 SiC 2 in water at pH 9 was used with 10 V field applied across the substrates. After 10 min of deposition, the coating surface density was 1.89 ± 0.26 mg/cm 2 . The thin coatings were then rapidly densified using a Renishaw AM250 3D printing laser to scan the surface. Cross sections of the substrate post sintering, showed the coating thickness to be 10–30 μm and densified with silicon loss constrained to the surface, although the overall coverage and adhesion varies. Preliminary Raman spectroscopy results suggest some MAX phase remains after sintering, but further characterisation is required to confirm

Solution composition and particle size effects on the dissolution and solubility of a ThO2 microstructural analogue for UO2 matrix of nuclear fuel

The objective of this study was to investigate the dissolution rate of ThO2 which was synthesised to approximate, as closely as possible, the microstructure of UO2 in a nuclear fuel matrix. The optimal sintering temperature for ThO2 pellets was found to be 1750 ℃, which produced pellets with a microstructure similar to UO2 nuclear fuel pellets, with randomly oriented grains ranging in size from 10 to 30 μm. Dissolution was conducted using ThO2 particles of different size fractions (80 to 160 μm and 2 to 4 mm) in the presence and absence of carbonate, in solutions with pH from 2 to 8 and at 80 ℃. Dissolution rates were calculated from Th released from the solid phase to solution. Particles of ThO2 were also leached with 1 M HNO3 at 80 ℃ in order to investigate the morphological changes at the particle surfaces. The concentration of Th was found to be ≥ 10–9 mol/L at pH ≤ 4, lower than the theoretical solubility of crystalline ThO2. At higher pH values, from 4 to 8, the measured concentrations (10−10 to 10–12 mol/L) were between the theoretical solubility of ThO2 and Th(OH)4. Grain boundaries were shown to exert an influence on the dissolution of ThO2 particles. Using high resolution aqueous solution analysis, these data presented here extend the current understanding of Th solubility in solutio

New Measurements of Fine-Scale CMB Polarization Power Spectra from CAPMAP at Both 40 and 90 GHz

We present new measurements of the cosmic microwave background (CMB) polarization from the final season of the Cosmic Anisotropy Polarization MAPper (CAPMAP). The data set was obtained in winter 2004-2005 with the 7 m antenna in Crawford Hill, New Jersey, from 12 W-band (84-100 GHz) and 4 Q-band (36-45 GHz) correlation polarimeters with 3.3' and 6.5' beamsizes, respectively. After selection criteria were applied, 956 (939) hours of data survived for analysis of W-band (Q-band) data. Two independent and complementary pipelines produced results in excellent agreement with each other. A broad suite of null tests as well as extensive simulations showed that systematic errors were minimal, and a comparison of the W-band and Q-band sky maps revealed no contamination from galactic foregrounds. We report the E-mode and B-mode power spectra in 7 bands in the range 200 < l < 3000, extending the range of previous measurements to higher l. The E-mode spectrum, which is detected at 11 sigma significance, is in agreement with cosmological predictions and with previous work at other frequencies and angular resolutions. The BB power spectrum provides one of the best limits to date on B-mode power at 4.8 uK^2 (95% confidence).Comment: 19 pages, 17 figures, 2 tables, submitted to Ap

Nanoscale mechanism of UO2 formation through uranium reduction by magnetite

Uranium (U) is a ubiquitous element in the Earth’s crust at ~2 ppm. In anoxic environments, soluble hexavalent uranium (U(VI)) is reduced and immobilized. The underlying reduction mechanism is unknown but likely of critical importance to explain the geochemical behavior of U. Here, we tackle the mechanism of reduction of U(VI) by the mixed-valence iron oxide, magnetite. Through high-end spectroscopic and microscopic tools, we demonstrate that the reduction proceeds first through surface-associated U(VI) to form pentavalent U, U(V). U(V) persists on the surface of magnetite and is further reduced to tetravalent UO2 as nanocrystals (~1–2 nm) with random orientations inside nanowires. Through nanoparticle re-orientation and coalescence, the nanowires collapse into ordered UO2 nanoclusters. This work provides evidence for a transient U nanowire structure that may have implications for uranium isotope fractionation as well as for the molecular-scale understanding of nuclear waste temporal evolution and the reductive remediation of uranium contamination