272 research outputs found

    Motor Qualification for Long-Duration Mars Missions

    Get PDF
    Qualification of motors for deep space under extreme thermal environments to be encountered during the Mars Science Laboratory (MSL) mission is required to verify the reliability and validate mission assurance requirements. The motor assembly must survive all ground operations, plus the nominal 670 Martian-day (or sol) mission that includes summer and winter seasons of the Mars environment. The motor assembly was tested and characterized under extreme temperature conditions with reference to hardware requirements. The motor assembly has been proved to be remarkably robust and displayed no sign of degradation due to the 3 X (three times per JPL design principles) thermal environmental exposure to the punishing Mars surface operations cycles. The motor characteristics obtained before, during, and post-test comparisons for the surface operations cycles are within measurement error of one another. The motors withstood/survived 2,010 extreme temperature cycles with a Delta T of 190 C deep temperature cycles, representing three times the expected thermal cycling exposure during the MSL surface operations. The qualification test hardware elements (A200 motor assembly, encoders, and resolver) have not shown any signs of degradation due to the PQV (Package Qualification and Verification) testing. The test hardware has demonstrated sufficient life to survive the deep thermal cycles associated with MSL mission surface operations for three lives

    Slope and amplitude asymmetry effects on low frequency capacitively coupled carbon tetrafluoride plasmas

    Get PDF
    We report investigations of capacitively coupled carbon tetrafluoride (CF4) plasmas excited with tailored voltage waveforms containing up to five harmonics of a base frequency of 5.5 MHz. The impact of both the slope asymmetry, and the amplitude asymmetry, of these waveforms on the discharge is examined by combining experiments with particle-in-cell simulations. For all conditions studied herein, the discharge is shown to operate in the drift-ambipolar mode, where a comparatively large electric field in the plasma bulk (outside the sheaths) is the main mechanism for electron power absorption leading to ionization. We show that both types of waveform asymmetries strongly influence the ion energy at the electrodes, with the particularity of having the highest ion flux on the electrode where the lowest ion energy is observed. Even at the comparatively high pressure (600 mTorr) and low fundamental frequency of 5.5 MHz used here, tailoring the voltage waveforms is shown to efficiently create an asymmetry of both the ion energy and the ion flux in geometrically symmetric reactors

    A Comprehensive Toolkit for Inducible, Cell Type-Specific Gene Expression in Arabidopsis.

    Get PDF
    Understanding the context-specific role of gene function is a key objective of modern biology. To this end, we generated a resource for inducible cell type-specific transactivation in Arabidopsis ( <i>Arabidopsis thaliana</i> ) based on the well-established combination of the chimeric GR-LhG4 transcription factor and the synthetic <i>pOp</i> promoter. Harnessing the flexibility of the GreenGate cloning system, we produced a comprehensive set of transgenic lines termed GR-LhG4 driver lines targeting most tissues in the Arabidopsis shoot and root with a strong focus on the indeterminate meristems. When we combined these transgenic lines with effectors under the control of the <i>pOp</i> promoter, we observed tight temporal and spatial control of gene expression. In particular, inducible expression in F1 plants obtained from crosses of driver and effector lines allows for rapid assessment of the cell type-specific impact of an effector with high temporal resolution. Thus, our comprehensive and flexible method is suitable for overcoming the limitations of ubiquitous genetic approaches, the outputs of which often are difficult to interpret due to the widespread existence of compensatory mechanisms and the integration of diverging effects in different cell types

    Control of cambium initiation and activity in Arabidopsis by the transcriptional regulator AHL15

    Get PDF
    Plant secondary growth, which is the basis of wood formation, includes the production of secondary xylem, which is derived from meristematic cambium cells embedded in vascular tissue. Here, we identified an important role for the Arabidopsis thaliana (Arabidopsis) AT-HOOK MOTIF CONTAINING NUCLEAR LOCALIZED 15 (AHL15) transcriptional regulator in controlling vascular cambium activity. The limited secondary xylem development in inflorescence stems of herbaceous Arabidopsis plants was significantly reduced in ahl15 loss-of-function mutants, whereas constitutive or vascular meristem-specific AHL15 overexpression produced woody inflorescence stems. AHL15 was required for enhanced secondary xylem formation in the woody suppressor of overexpression of constans 1 (soc1) fruitfull (ful) double loss-of-function mutant. Moreover, we found that AHL15 induces vascular cambium activity downstream of the repressing SOC1 and FUL transcription factors, most likely similar to how it enhances lateral branching by promoting biosynthesis of the hormone cytokinin. Our results uncover a novel pathway driving cambium development, in which AHL15 expression levels act in parallel to and are dependent on the well-established TDIF-PXY-WOX pathway to differentiate between herbaceous and woody stem growth.Plant science

    Bridging the gap between global models and full fluid models : a fast 1D semi-analytical fluid model for electronegative plasmas

    Get PDF
    Analytical and numerical models allow investigation of complicated discharge phenomena and the interplay that makes plasmas such a complex environment. Global models are quick to implement and can have almost negligible computation cost, but provide only bulk or spatially averaged values. Full fluid models take longer to develop, and can take days to solve, but provide accurate spatio-temporal profiles of the whole plasma. The work presented here details a different type of model, analytically similar to fluid models, but computationally closer to a global model, and able to give spatially resolved solutions for the challenging environment of electronegative plasmas. Included are non-isothermal electrons, gas heating, and coupled neutral dynamics. Solutions are reached in seconds to minutes, and spatial profiles are given for densities, fluxes, and temperatures. This allows the semi-analytical model to fill the gap that exists between global and full fluid models, extending the tools available to researchers. The semi-analytical model can perform broad parameter sweeps that are not practical with more computationally expensive models, as well as exposing non-trivial trends that global models cannot capture. Examples are given for a low pressure oxygen CCP. Excellent agreement is shown with a full fluid model, and comparisons are drawn with the corresponding global model

    Absolute ozone densities in a radio-frequency driven atmospheric pressure plasma using two-beam UV-LED absorption spectroscopy and numerical simulations

    Get PDF
    International audienceThe efficient generation of reactive oxygen species (ROS) in cold atmospheric pressure plasma jets (APPJs) is an increasingly important topic, e.g. for the treatment of temperature sensitive biological samples in the field of plasma medicine. A 13.56 MHz radio-frequency (rf) driven APPJ device operated with helium feed gas and small admixtures of oxygen (up to 1%), generating a homogeneous glow-mode plasma at low gas temperatures, was investigated. Absolute densities of ozone, one of the most prominent ROS, were measured across the 11 mm wide discharge channel by means of broadband absorption spectroscopy using the Hartley band centred at lambda = 255 nm. A two-beam setup with a reference beam in Mach--Zehnder configuration is employed for improved signal-to-noise ratio allowing high-sensitivity measurements in the investigated single-pass weak-absorbance regime. The results are correlated to gas temperature measurements, deduced from the rotational temperature of the N2 (C 3 {{{\Pi }}}u \to B 3 {{{\Pi }}}g , upsilo = 0 \to 2) optical emission from introduced air impurities. The observed opposing trends of both quantities as a function of rf power input and oxygen admixture are analysed and explained in terms of a zero-dimensional plasma-chemical kinetics simulation. It is found that the gas temperature as well as the densities of O and O2(b{}1{{{Sigma }}}g ) influence the absolute O3 densities when the rf power is varied

    Experimental benchmark of kinetic simulations of capacitively coupled plasmas in molecular gases

    Get PDF
    International audienceWe discuss the origin of uncertainties in the results of numerical simulations of low-temperature plasma sources, focusing on capacitively coupled plasmas. These sources can be operated in various gases/gas mixtures, over a wide domain of excitation frequency, voltage, and gas pressure. At low pressures, the non-equilibrium character of the charged particle transport prevails and particle-based simulations become the primary tools for their numerical description. The particle-in-cell method, complemented with Monte Carlo type description of collision processes, is a well-established approach for this purpose. Codes based on this technique have been developed by several authors/groups, and have been benchmarked with each other in some cases. Such benchmarking demonstrates the correctness of the codes, but the underlying physical model remains unvalidated. This is a key point, as this model should ideally account for all important plasma chemical reactions as well as for the plasma-surface interaction via including specific surface reaction coefficients (electron yields, sticking coefficients, etc). In order to test the models rigorously, comparison with experimental ?benchmark data? is necessary. Examples will be given regarding the studies of electron power absorption modes in O 2 , and CF 4 ?Ar discharges, as well as on the effect of modifications of the parameters of certain elementary processes on the computed discharge characteristics in O 2 capacitively coupled plasmas
    corecore