Late-Onset Neuromyelitis Optica Spectrum Disorder Mimicking a Non-Arteritic Anterior Ischemic Optic Neuropathy–Case Report

A 60-year-old white woman presented to the emergency department with painless decrease of visual acuity in the left eye (LE). The diagnosis of a non-arteritic anterior ischemic optic neuropathy in the LE was established based on the clinical picture and the results of static perimetry, fluorescein angiography, visual evoked potential, and magnetic resonance imaging (MRI) of the brain and orbit. Six months later, the patient reported visual impairment in the right eye (RE). Best corrected visual acuity (BCVA) in the RE was 5/10. Gadolinium-enhanced MRI showing inflammation of both optic nerves and the optic chiasm in correlation with positivity for immunglobulin G antibody against aquaporin-4 led to the diagnosis of late-onset neuromyelitis optica spectrum disorder. High-dose intravenous methylprednisolone therapy followed by oral tapering was administered and oral azathioprine was started to reduce the risk of further relapse. At discharge, BCVA was 5/5 in the RE. The patient remains under the care of neurology and ophthalmology clinics, with no recurrences for two years. The possibility of neuromyelitis optica spectrum disorder with optic neuritis in older patients is important in the differential diagnosis of ischemic optic neuropathy

Calibrating the FloodMap model based on geomorphological fieldwork and terrain analysis to improve the integrated HydroProg-FloodMap system for forecasting inundation [abstract]

Calibrating the FloodMap model based on geomorphological fieldwork and terrain analysis to improve the integrated HydroProg-FloodMap system for forecasting inundation [abstract

Treatment of Primary Aldosteronism with mTORC1 Inhibitors

mTORC1 activity is often increased in the adrenal cortex of patients with primary aldosteronism and mTORC1 inhibition decreases aldosterone production in adrenocortical cells, suggesting the mTORC1 pathway as a possible target for treatment of primary aldosteronism.; To investigate the effect of mTORC1 inhibition on adrenal steroid hormones and hemodynamic parameters in mice and in patients with primary aldosteronism.; (i) Plasma aldosterone, corticosterone and angiotensin II were measured in mice treated for 24 hours with vehicle or rapamycin. (ii) Plasma aldosterone levels after a saline infusion test, plasma renin, 24-hour urine steroid hormone metabolome and hemodynamic parameters were measured during an open-label study in 12 patients with primary aldosteronism before and after two-weeks of treatment with everolimus and after a two-week washout period.; (i) Change in plasma aldosterone levels. (ii) Change in other steroid hormones, renin, angiotensin II and hemodynamic parameters.; Treatment of mice with rapamycin significantly decreased plasma aldosterone levels (P = 0.007). Overall, treatment of primary aldosteronism patients with everolimus significantly decreased blood pressure (P < 0.05) and increased renin levels (P = 0.001) but did not lead to a significant reduction in aldosterone levels. However, prominent reduction of aldosterone levels upon everolimus treatment was observed in 4 out of 12 patients.; In mice, mTORC1 inhibition was associated with reduced plasma aldosterone levels. In patients with primary aldosteronism, mTORC1 inhibition was associated with improved blood pressure and renin suppression. In addition, mTORC1 inhibition appeared to reduce plasma aldosterone in a subset of patients

Insulin resistance causes inflammation in adipose tissue

Obesity is a major risk factor for insulin resistance and type 2 diabetes. In adipose tissue, obesity-mediated insulin resistance correlates with the accumulation of proinflammatory macrophages and inflammation. However, the causal relationship of these events is unclear. Here, we report that obesity-induced insulin resistance in mice precedes macrophage accumulation and inflammation in adipose tissue. Using a mouse model that combines genetically induced, adipose-specific insulin resistance (mTORC2-knockout) and diet-induced obesity, we found that insulin resistance causes local accumulation of proinflammatory macrophages. Mechanistically, insulin resistance in adipocytes results in production of the chemokine monocyte chemoattractant protein 1 (MCP1), which recruits monocytes and activates proinflammatory macrophages. Finally, insulin resistance (high homeostatic model assessment of insulin resistance [HOMA-IR]) correlated with reduced insulin/mTORC2 signaling and elevated MCP1 production in visceral adipose tissue from obese human subjects. Our findings suggest that insulin resistance in adipose tissue leads to inflammation rather than vice versa

Current patch test results with the European baseline series and extensions to it from the 'European Surveillance System on Contact Allergy' network, 2007-2008

BACKGROUND: The pattern of contact sensitization to the supposedly most important allergens assembled in the baseline series differs between countries, presumably at least partly because of exposure differences. Objectives. To describe the prevalence of contact sensitization to allergens tested in consecutive patients in the years 2007 and 2008, and to discuss possible differences. METHODS: Data from the 39 departments in 11 European countries comprising the European Surveillance System on Contact Allergy network (www.essca-dc.org) in this period have been pooled and analysed according to common standards. RESULTS: Patch test results with the European baseline series, and country-specific or department-specific additions to it, obtained in 25 181 patients, showed marked international variation. Metals and fragrances are still the most frequent allergens across Europe. Some allergens tested nationally may be useful future additions to the European baseline series, for example methylisothiazolinone, whereas a few long-term components of the European baseline series, namely primin and clioquinol, no longer warrant routine testing. CONCLUSIONS: The present analysis points to 'excess' prevalences of specific contact sensitization in some countries, although interpretation must be cautious if only few, and possibly specialized, centres are representing one country. A comparison as presented may help to target in-depth research into possible causes of 'excess' exposure, and/or consideration of methodological issues, including modifications to the baseline series

International Consensus Statement on Rhinology and Allergy: Rhinosinusitis

Background: The 5 years since the publication of the first International Consensus Statement on Allergy and Rhinology: Rhinosinusitis (ICAR‐RS) has witnessed foundational progress in our understanding and treatment of rhinologic disease. These advances are reflected within the more than 40 new topics covered within the ICAR‐RS‐2021 as well as updates to the original 140 topics. This executive summary consolidates the evidence‐based findings of the document. Methods: ICAR‐RS presents over 180 topics in the forms of evidence‐based reviews with recommendations (EBRRs), evidence‐based reviews, and literature reviews. The highest grade structured recommendations of the EBRR sections are summarized in this executive summary. Results: ICAR‐RS‐2021 covers 22 topics regarding the medical management of RS, which are grade A/B and are presented in the executive summary. Additionally, 4 topics regarding the surgical management of RS are grade A/B and are presented in the executive summary. Finally, a comprehensive evidence‐based management algorithm is provided. Conclusion: This ICAR‐RS‐2021 executive summary provides a compilation of the evidence‐based recommendations for medical and surgical treatment of the most common forms of RS

3D Printed Computer Case : Transforming a broken laptop into a desktop PC

The objectives of this thesis included designing, manufacturing and assembling of a PC case, optimizing the design and parameters of manufacturing, and using computer components disassembled from Lenovo Yoga 510 laptop. The aim of this thesis study was to produce a fully functional desktop PC. The design was inspired by an igloo shape and was done using SolidWorks software. The PC case consists of: igloo dome, support structure for computer components, and a readymade metal bottom plate. The manufac-turing method was additive manufacturing performed on two MakerBot Replicator 5th Generation 3D printers in Arcada University of Applied Sciences. The igloo PC case was printed in 10 pieces, the support structure for the computer components was printed in 2 parts. In total approximately 0,9 kg of white PLA filament was used, with a total printing time of 88 h. Assembling process involved sanding off all the surface imperfections, gluing and screwing. First the igloo dome was glued, then the computer components were screwed and attached to the support structure. The support structure was then screwed to the metal bottom plate. Lastly, the igloo cover was placed on top of the assembly. The result is a working PC, which is fully functional, it was tested by plugging it to a computer screen and turning it on. Several design aspects could had been designed better, especially small geometry parts, as due to the limitations of 3D printing, they did not have desired quality, although the imperfections were fixable and they did not affect the overall product