6,811 research outputs found
Evidence cross-validation and Bayesian inference of MAST plasma equilibria
In this paper, current profiles for plasma discharges on the Mega-Ampere
Spherical Tokamak (MAST) are directly calculated from pickup coil, flux loop
and Motional-Stark Effect (MSE) observations via methods based in the
statistical theory of Bayesian analysis. By representing toroidal plasma
current as a series of axisymmetric current beams with rectangular
cross-section and inferring the current for each one of these beams,
flux-surface geometry and q-profiles are subsequently calculated by elementary
application of Biot-Savart's law. The use of this plasma model in the context
of Bayesian analysis was pioneered by Svensson and Werner on the Joint-European
Tokamak (JET) [J. Svensson and A. Werner. Current tomography for axisymmetric
plasmas. Plasma Physics and Controlled Fusion, 50(8):085002, 2008]. In
this framework, linear forward models are used to generate diagnostic
predictions, and the probability distribution for the currents in the
collection of plasma beams was subsequently calculated directly via application
of Bayes' formula. In this work, we introduce a new diagnostic technique to
identify and remove outlier observations associated with diagnostics falling
out of calibration or suffering from an unidentified malfunction. These
modifications enable good agreement between Bayesian inference of the last
closed flux-surface (LCFS) with other corroborating data, such as such as that
from force balance considerations using EFIT++ [L. Appel et al., Proc. 33rd EPS
Conf., Rome, Italy, 2006]. In addition, this analysis also yields errors on the
plasma current profile and flux-surface geometry, as well as directly
predicting the Shafranov shift of the plasma core.This work was jointly funded by the Australian Government
through International Science Linkages Grant No.
CG130047, the Australian National University, the United
Kingdom Engineering and Physical Sciences Research
Council under Grant No. EP/G003955, and by the European
Communities under the contract of Association between EURATOM and CCFE
Efficiency of Truthful and Symmetric Mechanisms in One-sided Matching
We study the efficiency (in terms of social welfare) of truthful and
symmetric mechanisms in one-sided matching problems with {\em dichotomous
preferences} and {\em normalized von Neumann-Morgenstern preferences}. We are
particularly interested in the well-known {\em Random Serial Dictatorship}
mechanism. For dichotomous preferences, we first show that truthful, symmetric
and optimal mechanisms exist if intractable mechanisms are allowed. We then
provide a connection to online bipartite matching. Using this connection, it is
possible to design truthful, symmetric and tractable mechanisms that extract
0.69 of the maximum social welfare, which works under assumption that agents
are not adversarial. Without this assumption, we show that Random Serial
Dictatorship always returns an assignment in which the expected social welfare
is at least a third of the maximum social welfare. For normalized von
Neumann-Morgenstern preferences, we show that Random Serial Dictatorship always
returns an assignment in which the expected social welfare is at least
\frac{1}{e}\frac{\nu(\opt)^2}{n}, where \nu(\opt) is the maximum social
welfare and is the number of both agents and items. On the hardness side,
we show that no truthful mechanism can achieve a social welfare better than
\frac{\nu(\opt)^2}{n}.Comment: 13 pages, 1 figur
Social welfare in one-sided matchings: Random priority and beyond
We study the problem of approximate social welfare maximization (without
money) in one-sided matching problems when agents have unrestricted cardinal
preferences over a finite set of items. Random priority is a very well-known
truthful-in-expectation mechanism for the problem. We prove that the
approximation ratio of random priority is Theta(n^{-1/2}) while no
truthful-in-expectation mechanism can achieve an approximation ratio better
than O(n^{-1/2}), where n is the number of agents and items. Furthermore, we
prove that the approximation ratio of all ordinal (not necessarily
truthful-in-expectation) mechanisms is upper bounded by O(n^{-1/2}), indicating
that random priority is asymptotically the best truthful-in-expectation
mechanism and the best ordinal mechanism for the problem.Comment: 13 page
Emission Spectra from Internal Shocks in Gamma-Ray-Burst Sources
Unsteady activity of gamma-ray burst sources leads to internal shocks in
their emergent relativistic wind. We study the emission spectra from such
shocks, assuming that they produce a power-law distribution of relativistic
electrons and posses strong magnetic fields. The synchrotron radiation emitted
by the accelerated electrons is Compton up-scattered multiple times by the same
electrons. A substantial component of the scattered photons acquires high
energies and produces e+e- pairs. The pairs transfer back their kinetic energy
to the radiation through Compton scattering. The generic spectral signature
from pair creation and multiple Compton scattering is highly sensitive to the
radius at which the shock dissipation takes place and to the Lorentz factor of
the wind. The entire emission spectrum extends over a wide range of photon
energies, from the optical regime up to TeV energies. For reasonable values of
the wind parameters, the calculated spectrum is found to be in good agreement
with the burst spectra observed by BATSE.Comment: 12 pages, latex, 2 figures, submitted to ApJ
Journal Staff
The aluminumâzinc-vacancy (Al Zn âV Zn ) complex is identified as one of the dominant defects in Al-containing n -type ZnO after electron irradiation at room temperature with energies above 0.8 MeV. The complex is energetically favorable over the isolated V Zn , binding more than 90% of the stable V Zn âs generated by the irradiation. It acts as a deep acceptor with the (0/â ) energy level located at approximately 1 eV above the valence band. Such a complex is concluded to be a defect of crucial and general importance that limits the n -type doping efficiency by complex formation with donors, thereby literally removing the donors, as well as by charge compensation
Hydrogen induced optically-active defects in silicon photonic nanocavities
This work was supported by Era-NET NanoSci LECSIN project coordinated by F. Priolo, by the Italian Ministry of University and Research, FIRB contract No. RBAP06L4S5 and by the EPSRC UKSp project. Partial financial support by the Norwegian Research Council is also acknowledged.We demonstrate intense room temperature photoluminescence (PL) from optically active hydrogen- related defects incorporated into crystalline silicon. Hydrogen was incorporated into the device layer of a silicon on insulator (SOI) wafer by two methods: hydrogen plasma treatment and ion implantation. The room temperature PL spectra show two broad PL bands centered at 1300 and 1500 nm wavelengths: the first one relates to implanted defects while the other band mainly relates to the plasma treatment. Structural characterization reveals the presence of nanometric platelets and bubbles and we attribute different features of the emission spectrum to the presence of these different kind of defects. The emission is further enhanced by introducing defects into photonic crystal (PhC) nanocavities. Transmission electron microscopy analyses revealed that the isotropicity of plasma treatment causes the formation of a higher defects density around the whole cavity compared to the ion implantation technique, while ion implantation creates a lower density of defects embedded in the Si layer, resulting in a higher PL enhancement. These results further increase the understanding of the nature of optically active hydrogen defects and their relation with the observed photoluminescence, which will ultimately lead to the development of intense and tunable crystalline silicon light sources at room temperature.Publisher PDFPeer reviewe
Do group dynamics affect colour morph clines during a range shift?
Funded by Strategic Research Area Biodiversity and Ecosystem Services in a Changing Climate (BECC) Lund and Gothenburg Universities Wenner-Gren Foundation EU FP7 Swedish Research Council Royal Swedish Academy of Sciences (KVA) Stiftelsen Anna-Greta and Holger Crafoords Fund Crafoord FoundationPeer reviewedPostprin
Phonons in random alloys: the itinerant coherent-potential approximation
We present the itinerant coherent-potential approximation(ICPA), an analytic,
translationally invariant and tractable form of augmented-space-based,
multiple-scattering theory in a single-site approximation for harmonic phonons
in realistic random binary alloys with mass and force-constant disorder.
We provide expressions for quantities needed for comparison with experimental
structure factors such as partial and average spectral functions and derive the
sum rules associated with them. Numerical results are presented for Ni_{55}
Pd_{45} and Ni_{50} Pt_{50} alloys which serve as test cases, the former for
weak force-constant disorder and the latter for strong. We present results on
dispersion curves and disorder-induced widths. Direct comparisons with the
single-site coherent potential approximation(CPA) and experiment are made which
provide insight into the physics of force-constant changes in random alloys.
The CPA accounts well for the weak force-constant disorder case but fails for
strong force-constant disorder where the ICPA succeeds.Comment: 19 pages, 12 eps figures, uses RevTex
Variations In Microstructure And 12 Mechanical Propreties Of Cast Aluminum EN AC 43100 Alloy
The microstructure and mechanical properties of a gravity die and sand cast Al-10%Si-0.4%Mg alloy, which is one of the most important and frequently used industrial casting alloys, were examined. Tensile test samples were prepared from fan blades and sectioned through three positions which experienced different cooling rates. Furthermore, the inherent strength potential of the alloy was revealed by producing homogeneous and well fed specimens with a variety of microstructural coarseness, low content of oxide films and micro-porosity defects, solidified in a laboratory environment by gradient solidification technology. The solidification behaviour of the alloy was characterized by thermal analysis. By means of cooling curves, the solidification time and evolution of the microstructure was recorded. The relation between the microstructure and the mechanical properties was also assessed by using quality index-strength charts developed for the alloy. This study shows that the microstructural features, especially the ironrich needles denoted as ?-Al5FeSi, and mechanical properties are markedly affected by the different processing routes. The solidification rate exerts a significant effect on the coarseness of the microstructure and the intermetallic compounds that evolve during solidification, and this directly influences the tensile properties
- âŠ