Evaporation of a thin film: diffusion of the vapour and Marangoni instabilities

The stability of an evaporating thin liquid film on a solid substrate is investigated within lubrication theory. The heat flux due to evaporation induces thermal gradients; the generated Marangoni stresses are accounted for. Assuming the gas phase at rest, the dynamics of the vapour reduces to diffusion. The boundary condition at the interface couples transfer from the liquid to its vapour and diffusion flux. A non-local lubrication equation is obtained; this non-local nature comes from the Laplace equation associated with quasi-static diffusion. The linear stability of a flat film is studied in this general framework. The subsequent analysis is restricted to moderately thick films for which it is shown that evaporation is diffusion limited and that the gas phase is saturated in vapour in the vicinity of the interface. The stability depends only on two control parameters, the capillary and Marangoni numbers. The Marangoni effect is destabilising whereas capillarity and evaporation are stabilising processes. The results of the linear stability analysis are compared with the experiments of Poulard et al (2003) performed in a different geometry. In order to study the resulting patterns, the amplitude equation is obtained through a systematic multiple-scale expansion. The evaporation rate is needed and is computed perturbatively by solving the Laplace problem for the diffusion of vapour. The bifurcation from the flat state is found to be a supercritical transition. Moreover, it appears that the non-local nature of the diffusion problem unusually affects the amplitude equation

The Statistics of Crumpled Paper

A statistical study of crumpled paper is allowed by a minimal 1D model: a self-avoiding line bent at sharp angles -- in which resides the elastic energy -- put in a confining potential. Many independent equilibrium configurations are generated numerically and their properties are investigated. At small confinement, the distribution of segment lengths is log-normal in agreement with previous predictions and experiments. At high confinement, the system approaches a jammed state with a critical behavior, whereas the length distribution follows a Gamma law which parameter is predicted as a function of the number of layers in the system

Coherent structures in Dissipative Particle Dynamics simulations of the transition to turbulence in compressible shear flows

We present simulations of coherent structures in compressible flows near the transition to turbulence using the Dissipative Particle Dynamics (DPD) method. The structures we find are remarkably consistent with experimental observations and DNS simulations of incompressible flows, despite a difference in Mach number of several orders of magnitude. The bifurcation from the laminar flow is bistable and shifts to higher Reynolds numbers when the fluid becomes more compressible. This work underlines the robustness of coherent structures in the transition to turbulence and illustrates the ability of particle-based methods to reproduce complex non-linear instabilities.Comment: 4 pages, 5 figure

The buckling of a swollen thin gel layer bound to a compliant substrate

Gels are used to design bilayered structures with high residual stresses. The swelling of a thin layer on a compliant substrate leads to compressive stresses. The post-buckling of this layer is investigated experimentally; the wavelengths and amplitudes of the resulting modes are measured. A simplified model with a self-avoiding rod on a Winkler foundation is in semi-quantitative agreement with experiments and reproduces the observed cusp-like folds.Comment: submitted to Journal of Applied Mechanic

Virtual mirrors: non-line-of-sight imaging beyond the third bounce

Non-line-of-sight (NLOS) imaging methods are capable of reconstructing complex scenes that are not visible to an observer using indirect illumination. However, they assume only third-bounce illumination, so they are currently limited to single-corner configurations, and present limited visibility when imaging surfaces at certain orientations. To reason about and tackle these limitations, we make the key observation that planar diffuse surfaces behave specularly at wavelengths used in the computational wave-based NLOS imaging domain. We call such surfaces virtual mirrors. We leverage this observation to expand the capabilities of NLOS imaging using illumination beyond the third bounce, addressing two problems: imaging single-corner objects at limited visibility angles, and imaging objects hidden behind two corners. To image objects at limited visibility angles, we first analyze the reflections of the known illuminated point on surfaces of the scene as an estimator of the position and orientation of objects with limited visibility. We then image those limited visibility objects by computationally building secondary apertures at other surfaces that observe the target object from a direct visibility perspective. Beyond single-corner NLOS imaging, we exploit the specular behavior of virtual mirrors to image objects hidden behind a second corner by imaging the space behind such virtual mirrors, where the mirror image of objects hidden around two corners is formed. No specular surfaces were involved in the making of this paper

Virtual Mirrors: Non-Line-of-Sight Imaging Beyond the Third Bounce

Non-line-of-sight (NLOS) imaging methods are capable of reconstructing complex scenes that are not visible to an observer using indirect illumination. However, they assume only third-bounce illumination, so they are currently limited to single-corner configurations, and present limited visibility when imaging surfaces at certain orientations. To reason about and tackle these limitations, we make the key observation that planar diffuse surfaces behave specularly at wavelengths used in the computational wave-based NLOS imaging domain. We call such surfaces virtual mirrors. We leverage this observation to expand the capabilities of NLOS imaging using illumination beyond the third bounce, addressing two problems: imaging single-corner objects at limited visibility angles, and imaging objects hidden behind two corners. To image objects at limited visibility angles, we first analyze the reflections of the known illuminated point on surfaces of the scene as an estimator of the position and orientation of objects with limited visibility. We then image those limited visibility objects by computationally building secondary apertures at other surfaces that observe the target object from a direct visibility perspective. Beyond single-corner NLOS imaging, we exploit the specular behavior of virtual mirrors to image objects hidden behind a second corner by imaging the space behind such virtual mirrors, where the mirror image of objects hidden around two corners is formed. No specular surfaces were involved in the making of this paper

Genetic characterization of a rare H12N3 avian influenza virus isolated from a green-winged teal in Japan

This study reports on the genetic characterization of an avian influenza virus, subtype H12N3, isolated from an Eurasian green-winged teal (Anas crecca) in Japan in 2009. The entire genome sequence of the isolate was analyzed, and phylogenetic analyses were conducted to characterize the evolutionary history of the isolate. Phylogenetic analysis of the hemagglutinin and neuraminidase genes indicated that the virus belonged to the Eurasian-like avian lineage. Molecular dating indicated that this H12 virus is likely a multiple reassortant influenza A virus. This is the first reported characterization of influenza A virus subtype H12N3 isolated in Japan and these data contribute to the accumulation of knowledge on the genetic diversity and generation of novel influenza A viruses.National Institute of Allergy and Infectious Diseases (U.S.) (Contracts HHSN266200700009C and HHSN266200700007)Japan Society for the Promotion of Science. Grant-in-Aid for the Bilateral Joint ProjectsHeiwa Nakajima Foundatio

Virtual Mirrors: Non-Line-of-Sight Imaging Beyond the Third Bounce

Non-line-of-sight (NLOS) imaging methods reconstruct scenes hidden around one corner using indirect third-bounce illumination on a visible relay surface. We show how diffuse hidden objects may exhibit specular behaviour in NLOS methods, and how fourth- and fifth-bounce illumination can encode useful information, such as imaging objects hidden around two corners.Los métodos de imagen fuera de la línea de visión (con siglas NLOS en inglés) pueden reconstruir objetos detrás de una esquina usando iluminación indirecta donde la luz toma caminos de tres rebotes. Demostramos cómo objetos difusos pueden exhibir comportamiento especular en los métodos de imagen NLOS, y cómo los caminos del cuarto y quinto rebote también contienen información útil, pudiendo capturar imágenes de objetos alrededor de dos esquinas.&nbsp