Superconducting Quantum Memory with a Suspended Coaxial Resonator

A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error correction. There are two main methods used to make superconducting microwave resonators: traditionally machined out of bulk material, and lithographically fabricated on-chip in thin film. 3D resonators have few loss channels and larger mode volumes, and therefore smaller participations in the lossy parts, but it can be challenging to reach high material qualities. On-chip resonators can use low-loss thin films, but confine the field more tightly, resulting in higher participations and additional loss channels from the dielectric substrate. In this work, we present a design in which a dielectric scaffold supports a thin-film conductor within a 3D package, thus combining the low surface participations of bulk-machined cavities with the high quality and control over materials of thin-film circuits. By incorporating a separate chip containing a transmon qubit, we realize a quantum memory and measure single-photon lifetimes in excess of a millisecond. This hybrid 3D architecture has several advantages for scaling, as it relaxes the importance of the package and permits modular construction with separately-replaceable qubit and resonator devices.Comment: 11 pages, 8 figure

Optimal placement of Femto base stations in enterprise femtocell networks

Femto cells a.k.a. Low Power Nodes (LPNs) are deployed to improve indoor data rates as well as reduce traffic load on macro Base Stations (BSs) in 4G/LTE cellular networks. Indoor UEs getting high SNR (Signal-to-Noise Ratio) can experience good throughput, but SNR decreases at faster rate due to obstacles, present along the communication path. Hence, efficient placement of Femtos in enterprise buildings is crucial to attain desirable SNR for indoor users. We consider obstacles and shadowing effects by walls and include them in the system model. We develop a Linear Programming Problem (LPP) model by converting convex constraints into linear ones and solve it using GAMS tool, to place Femtos optimally inside the building. Our extensive experimentation proves the optimal placement of Femtos achieves 14.41% and 35.95% increase in SNR of indoor UEs over random and center placement strategies, respectively

A comparative study of efficacy of argyreia speciosa and orlistat for their anti-obesity action in high fat diet induced obese rats

Background: To compare the anti-obesity action of Argyreia speciosa root extract with standard anti-obesity drug orlistat. Healthy Sprague-Dawley rats (100-200g, n=50) were obtained from the animal house. Dose of Orlistat was 32.4mg/kg/day and Dose of Argyreia speciosa root was 500mg/kg/day.Methods: Food induced obesity model was used. Following parameters were evaluated: Total Cholesterol (mg/dl), Triglyceride (mg/dl), HDL-cholesterol (mg/dl), LDL cholesterol (mg/dl), atherogenic index, serum lipase (U/L). Analysis was done by one way ANOVA followed by post-hoc test and Graph Pad Prism version 5.00 was used for the analysis.Results: Total cholesterol, triglcerides, LDL cholesterol and Atherogenic index was significantly lesser in the rats fed with CD+O group and CD+ASE group than in the animals from CD group (p<0.05). It was also significantly lesser in the rats fed with CD+O+ASE than in the animals from CD group (p<0.05). HDL cholesterol was significantly greater in the rats fed with CD+O group and CD+ASE group than in the animals from CD group (p<0.05). It was also significantly greater in the rats fed with CD+O+ASE than in the animals from CD group (p<0.05).Conclusions: ASE significantly reduces total cholesterol (mg/dl), triglyceride (mg/dl), LDL cholesterol (mg/dl) and atherogenic index, it significantly increases HDL- cholesterol (mg/dl) and it is comparable to orlistat. Thus the anti-obesity action of ASE is comparable to orlistat

Journey of india’s first anaerobic digestion waste to biogas plant

Organic Recycling Systems Pvt. Ltd. which was established in 2008 and functions through its SPV-Solapur Bio-Energy Systems Pvt. Ltd (SBESPL), has established India’s first demonstration plant for MSW processing facility based on indigenously developed technology at Solapur, Maharashtra. The company is currently processing 200 Tons per day (TPD) of un-segregated MSW, and now is being upgraded to full working capacity of 400 TPD. Besides this, Bangalore 1000 tonnes and Meerut 800 tonnes are also in advanced stage

INFECTION PREVENTION AND CONTROL AWARENESS, ATTITUDES, AND PRACTICES AMONG HEALTHCARE PROFESSIONALS IN SOUTH INDIA

Introduction: Infection is a key challenge in healthcare settings around the world. Healthcare professionals (HCPs), including medical laboratory technologists (MLTs) and nurses, are at risk of infection because they are in close contact with infected patients. This investigation was conducted to evaluate the awareness, attitude, and practices of Infection Prevention Control (IPC) among HCPs working in private tertiary hospitals in two states in South India. Methodology: This quantitative study surveyed 571 HCPs in southern India. In September 2021, an online survey was used to collect data on the respondents’ demographic and IPC-related variables, as well as their awareness, attitudes, and practices of IPC. Results: The survey revealed high level of awareness, positive attitudes, and good IPC practices. Among the IPC practices, “changing gloves between contacts with different patients” was the most often practiced and “washing hands after removal of gloves” was the least practiced. Being a nurse, being older, finishing a graduate program, attending a risk assessment training, having sufficient Personal Protective Equipment (PPE) at work, and being aware of the safety guidelines were associated with better awareness. Being a nurse, being older, and holding a diploma were associated with more positive attitudes. Being MLT, attending risk assessment training, having sufficient PPE at work, and being aware of the safety guidelines were associated with better IPC practices. Conclusions: Measures to sustain the high awareness, positive attitudes, and good IPC practices by dealing with the factors associated with these variables identified in this study must be planned and implemented

Characterization and System Identification of XY Flexural Mechanism Using Double Parallelogram Manipulator for High Precision Scanning

This article represents modeling of double parallelogram flexural manipulator derived from basic classical mechanics theory. Fourth order vibration wave equation is used for mathematical modeling and its performance is determined for step input and sinusoidal forced input. Static characterization of DFM is carried out to determine stiffness and force deflection characteristics over the entire motion range and dynamic characteristics is carried out using Transient response and Frequency response. Transient response is determined using step input to DFM which gives system properties such as damping, rise time and settling time. These parameters are then compared with theoretical model presented previously. Frequency response of DFM system gives characteristics of system with different frequency inputs which is used for experimental modeling of DFM device. Here, Voice Coil Motor is used as Actuator and optical encoder is used for positioning sensing of motion stage. It is noted that theoretical model is having 5% accuracy with experimental results. To achieve better position and accuracy, PID and LQR (Linear Quadratic Regulator) implementation was carried out on experimental model. PID gains are optimally tuned by using Ziegler Nichols approach. PID control is implemented experimentally using dSPACE DS1104 microcontroller and Control Desk software. Experimentally, it is observed that positioning accuracy is less than 5 μm. Further multiple DFM blocks are arranged for developing XY flexural mechanism and static characterization was carried out on it. The comparison of experimental and FEA results for X-direction and Y-direction is presented at end of paper

Varadia, a new helicarionoidean semi-slug genus from India’s Western ghats (Stylommatophora: Helicarionoidea)

We here describe a new Indian helicarionoidean genus, Varadia Bhosale & Raheem gen. nov., containing the single species Varadia amboliensis Bhosale, Thackeray, Muley & Raheem gen. et sp. nov. This new semi-slug is endemic to the northern and central Western Ghats and is primarily a forest living species. We describe and figure the shell, reproductive system, radula, spermatophore and external morphology of this new species, and detail its known distribution. We explore its relationships to other helicarionoideans using phylogenetic analyses of DNA sequence data for part of the ribosomal RNA gene cluster and discuss the morphology of the new genus in relation to other, primarily South Indian, helicarionoidean taxa. Based on characters of the reproductive system, particularly the male genitalia and the gametolytic sac, we provisionally place Varadia gen. nov. in the Macrochlamydinae (Ariophantidae). This is consistent with the results of our molecular phylogenetic analyses. The combination of large size, broad, densely tuberculated shell lobes and a shell with ca 4 whorls and a disproportionately large body whorl makes V. amboliensis gen. et sp. nov. unique among the helicarionoidean taxa of the Western Ghats. The new semi-slug is also highly distinctive in the morphology of its male genitalia

Varadia, a new helicarionoidean semi-slug genus from India’s Western ghats (Stylommatophora: Helicarionoidea)

We here describe a new Indian helicarionoidean genus, Varadia Bhosale & Raheem gen. nov., containing the single species Varadia amboliensis Bhosale, Thackeray, Muley & Raheem gen. et sp. nov. This new semi-slug is endemic to the northern and central Western Ghats and is primarily a forest living species. We describe and figure the shell, reproductive system, radula, spermatophore and external morphology of this new species, and detail its known distribution. We explore its relationships to other helicarionoideans using phylogenetic analyses of DNA sequence data for part of the ribosomal RNA gene cluster and discuss the morphology of the new genus in relation to other, primarily South Indian, helicarionoidean taxa. Based on characters of the reproductive system, particularly the male genitalia and the gametolytic sac, we provisionally place Varadia gen. nov. in the Macrochlamydinae (Ariophantidae). This is consistent with the results of our molecular phylogenetic analyses. The combination of large size, broad, densely tuberculated shell lobes and a shell with ca 4 whorls and a disproportionately large body whorl makes V. amboliensis gen. et sp. nov. unique among the helicarionoidean taxa of the Western Ghats. The new semi-slug is also highly distinctive in the morphology of its male genitalia

Mechanisms of Loss of Functions of Human Angiogenin Variants Implicated in Amyotrophic Lateral Sclerosis

Background: Mutations in the coding region of angiogenin (ANG) gene have been found in patients suffering from Amyotrophic Lateral Sclerosis (ALS). Neurodegeneration results from the loss of angiogenic ability of ANG (protein coded by ANG). In this work, we performed extensive molecular dynamics (MD) simulations of wild-type ANG and disease associated ANG variants to elucidate the mechanism behind the loss of ribonucleolytic activity and nuclear translocation activity, functions needed for angiogenesis. Methodology/Principal Findings: MD simulations were carried out to study the structural and dynamic differences in the catalytic site and nuclear localization signal residues between WT-ANG (Wild-type ANG) and six mutants. Variants K17I, S28N, P112L and V113I have confirmed association with ALS, while T195C and A238G single nucleotide polymorphisms (SNPs) encoding L35P and K60E mutants respectively, have not been associated with ALS. Our results show that loss of ribonucleolytic activity in K17I is caused by conformational switching of the catalytic residue His114 by 99u. The loss of nuclear translocation activity of S28N and P112L is caused by changes in the folding of the residues 31 RRR 33 that result in the reduction in solvent accessible surface area (SASA). Consequently, we predict that V113I will exhibit loss of angiogenic properties by loss of nuclear translocation activity and L35P by loss of both ribonucleolytic activity and nuclear translocation activity. No functional loss was inferred for K60E. The MD simulation results were supported by hydrogen bond interactio