The mechanism and kinetics of void formation and growth in particulate filled PE composites

Volume strain measurements were carried out on PE/CaCO3 composites prepared with three different matrix polymers, containing various amounts of filler. The analysis of the debonding process and the various stages of void formation proved that the model developed for the prediction of the initiation of debonding is valid also for the studied PE/CaCO3 composites. Debonding stress is determined by the strength of interfacial adhesion, particle size and the stiffness of the matrix. In thermoplastic matrices usually two competitive processes take place: debonding and the plastic deformation of the polymer. The relative magnitude of the two processes strongly influences the number and size of the voids formed. Because of this competition and due to the wide particle size distribution of commercial fillers, only a certain fraction of the particles initiate the formation of voids. The number of voids formed is inversely proportional to the stiffness of the matrix polymer. In stiff matrices almost the entire amount of filler separates from the matrix under the effect of external load, while less than 30% debond in a PE which has an initial modulus of 0.4 GPa. Further decrease of matrix stiffness may lead to the complete absence of debonding and the composite would deform exclusively by shear yielding. Voids initiated by debonding grow during the further deformation of the composite. The size of the voids also depends on the modulus of the matrix. The rate of volume increase considerably exceeds the value predicted for cross-linked rubbers. At the same deformation and filler content the number of voids is smaller and their size is larger in soft matrices than in polymers with larger inherent modulus

Effect of X-Irradiation on Adenylate Cyclase Activity and Cyclic AMP Content of Primary Human Fibroblasts

Ionizing radiation provokes an increase of the cAMP level in several organs and body fluids. After reviewing the relevant literature we present the results of our own experiments on primary human fibroblasts. X-irradiation at doses of 0.5 and 2.5 Gy in vitro evoked a rapid and reversible increase of adenylate cyclase enzyme activity. A significant increase in cAMP level of these cells was also observed. Adenylate cyclase was usually localized basolaterally on the surface of unirradiated cells, while irradiation resulted in a modification of distribution, i.e., the enzyme activity also appeared in apical localization

Covariance and Fisher information in quantum mechanics

Variance and Fisher information are ingredients of the Cramer-Rao inequality. We regard Fisher information as a Riemannian metric on a quantum statistical manifold and choose monotonicity under coarse graining as the fundamental property of variance and Fisher information. In this approach we show that there is a kind of dual one-to-one correspondence between the candidates of the two concepts. We emphasis that Fisher informations are obtained from relative entropies as contrast functions on the state space and argue that the scalar curvature might be interpreted as an uncertainty density on a statistical manifold.Comment: LATE

Ecotoxicity and fungal deterioration of recycled polypropylene/wood composites: Effect of wood content and coupling

Polypropylene (PP)/wood composites were produced by homogenization in a twin-screw extruder and injection molding of tensile bars. Their mechanical properties were determined before and after exposure to biological treatment, and the effect of the treatment was assessed by various ways including visual inspection and the measurement of weight loss. The ecotoxicity of the materials was also evaluated by using the bioluminescent bacteria Vibrio fischeri. The results proved that wood facilitates biodeterioration (colonization) under the conditions used. The coupling agents do not have inhibitory effect, but seems to stimulate fungal growth (biodeterioration) at large loads of wood flour. PP/wood composites can be considered quite durable, but the influence of wood content on environmental resistance must be taken into account for materials intended for applications requiring long-term outdoor exposure as the time of exposure to microbial colonization increases. Direct ecotoxic effect on aquatic ecosystems cannot be expected from PP/wood composites

Particulate Fillers in Thermoplastics

The characteristics of particulate filled thermoplastics are determined by four factors: component properties, composition, structure and interfacial interactions. The most important filler characteristics are particle size, size distribution, specific surface area and particle shape, while the main matrix property is stiffness. Segregation, aggregation and the orientation of anisotropic particles determine structure. Interfacial interactions lead to the formation of a stiff interphase considerably influencing properties. Interactions are changed by surface modification, which must be always system specific and selected according to its goal. Under the effect of external load inhomogeneous stress distribution develops around heterogeneities, which initiate local micromechanical deformation processes determining the macroscopic properties of the composites

Neutron activation cross sections on lead isotopes

The cross sections for the reactions Pb-204(n,n(')gamma)Pb-204(m), Pb-204(n,2n)Pb-203, Pb-204(n,2n)Pb-203(m1), Pb-204(n,3n)Pb-202(m), Pb-206(n,3n)Pb-204(m), Pb-206(n,alpha)Hg-203, and Pb-208(n,p)Tl-208 were determined at the IRMM van de Graaff laboratory in the neutron energy range from 14 to 21 MeV. Both natural and enriched samples were irradiated with neutrons produced via the H-3(d,n)He-4 reaction. The induced activities were determined by gamma-ray spectrometry using a HPGe detector in a low-background shield. Neutron fluences were determined with the well-known cross section of the Al-27(n,alpha)Na-24 reaction. Enriched samples were essential to determine the cross sections for the reactions with Pb-204(m) and Pb-206(m) isomers in the final state. Accurate results for reactions with Pb-204,Pb-206 as target nuclei with natural lead samples were enabled through a precise measurement of the isotopic ratios. For a first investigation of the consequences of the present data for nuclear reaction models they were confronted with calculations based on global parameter systematics in a phenomenological and in a microscopic approach and with parameters selected to reproduce the available data. The TALYS code was used for the former two calculations involving parameter systematics while the STAPRE code was used for the latter calculation