Towards Net Zero Greenhouse Gas Emissions in the Energy and Chemical Sectors in Switzerland and Beyond - A Review

In today's societies, climate-damaging and finite fossil resources such as oil and natural gas serve a dual purpose as energy source and as carbon source for chemicals and plastics. To respond to the finite availability and to meet international climate goals, a change to a renewable energy and raw material basis is inevitable and represents a highly complex task. In this review, we assess possible technology paths for Switzerland to reach these goals. First, we provide an overview of Switzerland's current energy demand and discuss possible renewable technologies as well as proposed scenarios to defossilize the current energy system. In here, electric vehicles and heat pumps are key technologies, whereas mainly photovoltaics replace nuclear power to deliver clean electricity. The production of chemicals also consumes fossil resources and for Switzerland, the oil demand for imported domestically used chemicals and plastics corresponds to around 20% of the current energetic oil demand. Thus, we additionally summarize technologies and visions for a sustainable chemical sector based on the renewable carbon sources biomass, CO2 and recycled plastic. As biomass is the most versatile renewable energy and carbon source, although with a limited availability, aspects and proposed strategies for an optimal use are discussed

Biochemical Conversion Processes of Lignocellulosic Biomass to Fuels and Chemicals – A Review

Lignocellulosic biomass – such as wood, agricultural residues or dedicated energy crops – is a promising renewable feedstock for production of fuels and chemicals that is available at large scale at low cost without direct competition for food usage. Its biochemical conversion in a sugar platform biorefinery includes three main unit operations that are illustrated in this review: the physico-chemical pretreatment of the biomass, the enzymatic hydrolysis of the carbohydrates to a fermentable sugar stream by cellulases and finally the fermentation of the sugars by suitable microorganisms to the target molecules. Special emphasis in this review is put on the technology, commercial status and future prospects of the production of second-generation fuel ethanol, as this process has received most research and development efforts so far. Despite significant advances, high enzyme costs are still a hurdle for large scale competitive lignocellulosic ethanol production. This could be overcome by a strategy termed 'consolidated bioprocessing' (CBP), where enzyme production, enzymatic hydrolysis and fermentation is integrated in one step – either by utilizing one genetically engineered superior microorganism or by creating an artificial co-culture. Insight is provided on both CBP strategies for the production of ethanol as well as of advanced fuels and commodity chemicals

Impacts of biofilms on the conversion of cellulose

Lignocellulose is a widely available renewable carbon source and a promising feedstock for the production of various chemicals in biorefineries. However, its recalcitrant nature is a major hurdle that must be overcome to enable economic conversion processes. Deconstruction of lignocellulose is part of the global carbon cycle, and efficient microbial degradation systems have evolved that might serve as models to improve commercial conversion processes. Biofilms—matrix encased, spatially organized clusters of microbial cells and the predominating lifestyle in nature—have been recognized for their essential role in the degradation of cellulose in nature, e.g., in soils or in the digestive tracts of ruminant animals. Cellulolytic biofilms allow for a high concentration of enzymes at the boundary layer between the solid substrate and the liquid phase and the more complete capture of hydrolysis products directly at the hydrolysis site, which is energetically favorable. Furthermore, enhanced expression of genes for carbohydrate active enzymes as a response to the attachment on solid substrate has been demonstrated for cellulolytic aerobic fungi and anerobic bacteria. In natural multispecies biofilms, the vicinity of different microbial species allows the creation of efficient food webs and synergistic interactions thereby, e.g., avoiding the accumulation of inhibiting metabolites. In this review, these topics are discussed and attempts to realize the benefits of biofilms in targeted applications such as the consolidated bioprocessing of lignocellulose are highlighted

Biomasse: vielseitig einsetzbar! = La biomasse : si polyvalente !

Im zukünftigen schweizerischen Energie- und Rohstoffsystem spielt Biomasse eine wichtige Rolle. Sie kann als Energie- oder Kohlenstoffquelle, aber auch zur CO2-Sequestrierung verwendet werden. Doch welche Anwendung ergibt am meisten Sinn?La biomasse jouera à l’avenir un rôle important en Suisse dans le domaine de l’énergie et des matières premières. Elle peut être utilisée comme source d’énergie ou de carbone, ainsi que pour la séquestration du CO2. Mais quelle en est l’application la plus pertinente

Steam Explosion Pretreatment of Beechwood. Part 2: Quantification of Cellulase Inhibitors and Their Effect on Avicel Hydrolysis

Steam explosion is a well-known process to pretreat lignocellulosic biomass in order to enhance sugar yields in enzymatic hydrolysis, but pretreatment conditions have to be optimized individually for each material. In this study, we investigated how the results of a pretreatment optimization procedure are influenced by the chosen reaction conditions in the enzymatic hydrolysis. Beechwood was pretreated by steam explosion and the resulting biomass was subjected to enzymatic hydrolysis at glucan loadings of 1% and 5% employing either washed solids or the whole pretreatment slurry. For enzymatic hydrolysis in both reaction modes at a glucan loading of 1%, the glucose yields markedly increased with increasing severity and with increasing pretreatment temperature at identical severities and maximal values were reached at a pretreatment temperature of 230 °C. However, the optimal severity was 5.0 for washed solids enzymatic hydrolysis, but only 4.75 for whole slurry enzymatic hydrolysis. When the glucan loading was increased to 5%, glucose yields hardly increased for pretreatment temperatures between 210 and 230 °C at a given severity, and a pretreatment temperature of 220 °C was sufficient under these conditions. Consequently, it is important to precisely choose the desired conditions of the enzymatic hydrolysis reaction, when aiming to optimize the pretreatment conditions for a certain biomass

Engineering of ecological niches to create stable artificial consortia for complex biotransformations

The design of controllable artificial microbial consortia has attracted considerable interest in recent years to capitalize on the inherent advantages in comparison to monocultures such as the distribution of the metabolic burden by division of labor, the modularity and the ability to convert complex substrates. One promising approach to control the consortia composition, function and stability is the provision of defined ecological niches fitted to the specific needs of the consortium members. In this review, we discuss recent examples for the creation of metabolic niches by biological engineering of resource partitioning and syntrophic interactions. Moreover, we introduce a complementing process engineering approach to provide defined spatial niches with differing abiotic conditions (e.g. O2, T, light) in stirred tank reactors harboring biofilms. This enables the co-cultivation of microorganisms with non-overlapping abiotic requirements and the control of the strain ratio in consortia characterized by substrate competition

Nuclear Emulsion Film Detectors for Proton Radiography: Design and Test of the First Prototype

Proton therapy is nowadays becoming a wide spread clinical practice in cancer therapy and sophisticated treatment planning systems are routinely used to exploit at best the ballistic properties of charged particles. The information on the quality of the beams and the range of the protons is a key issue for the optimization of the treatment. For this purpose, proton radiography can be used in proton therapy to obtain direct information on the range of the protons, on the average density of the tissues for treatment planning optimization and to perform imaging with negligible dose to the patient. We propose an innovative method based on nuclear emulsion film detectors for proton radiography, a technique in which images are obtained by measuring the position and the residual range of protons passing through the patient's body. Nuclear emulsion films interleaved with tissue equivalent absorbers can be fruitfully used to reconstruct proton tracks with very high precision. The first prototype of a nuclear emulsion based detector has been conceived, constructed and tested with a therapeutic proton beam at PSI. The scanning of the emulsions has been performed at LHEP in Bern, where a fully automated microscopic scanning technology has been developed for the OPERA experiment on neutrino oscillations. After track reconstruction, the first promising experimental results have been obtained by imaging a simple phantom made of PMMA with a step of 1 cm. A second phantom with five 5 x 5 mm^2 section aluminum rods located at different distances and embedded in a PMMA structure has been also imaged. Further investigations are in progress to improve the resolution and to image more sophisticated phantoms.Comment: Presented at the 11th ICATPP Conference on Astroparticle, Particle, Space Physics, Detectors and Medical Physics Applications, Como (Italy), October 200

Co-hydrolysis of hydrothermal and dilute acid pretreated populus slurries to support development of a high-throughput pretreatment system

Background The BioEnergy Science Center (BESC) developed a high-throughput screening method to rapidly identify low-recalcitrance biomass variants. Because the customary separation and analysis of liquid and solids between pretreatment and enzymatic hydrolysis used in conventional analyses is slow, labor-intensive and very difficult to automate, a streamlined approach we term 'co-hydrolysis' was developed. In this method, the solids and liquid in the pretreated biomass slurry are not separated, but instead hydrolysis is performed by adding enzymes to the whole pretreated slurry. The effects of pretreatment method, severity and solids loading on co-hydrolysis performance were investigated. Results For hydrothermal pretreatment at solids concentrations of 0.5 to 2%, high enzyme protein loadings of about 100 mg/g of substrate (glucan plus xylan) in the original poplar wood achieved glucose and xylose yields for co-hydrolysis that were comparable with those for washed solids. In addition, although poplar wood sugar yields from co-hydrolysis at 2% solids concentrations fell short of those from hydrolysis of washed solids after dilute sulfuric acid pretreatment even at high enzyme loadings, pretreatment at 0.5% solids concentrations resulted in similar yields for all but the lowest enzyme loading. Conclusions Overall, the influence of severity on susceptibility of pretreated substrates to enzymatic hydrolysis was clearly discernable, showing co-hydrolysis to be a viable approach for identifying plant-pretreatment-enzyme combinations with substantial advantages for sugar production

Lignin repolymerisation in spruce autohydrolysis pretreatment increases cellulase deactivation

This study presents a modified autohydrolysis pretreatment which helps to overcome the recalcitrance of softwood for enzymatic hydrolysis of its cellulose. Autohydrolysis pretreatments of spruce wood were performed with 2-naphthol, which prevents lignin repolymerisation reactions, thereby increasing the enzymatic digestibility of cellulose by up to 64%. The negative influence of repolymerised lignin structures on enzymatic hydrolysis was confirmed by the addition of resorcinol in autohydrolysis, which is known to promote repolymerisation reactions and decreased the biomass digestibility. Several analyses were performed to study the underlying mechanism of this effect on hydrolysis, indicating that cellulolytic enzymes are adsorbed and deactivated especially by repolymerised lignin structures, which accounts for the high differences in biomass digestibility. It was shown that lignin repolymerisation significantly increases its specific surface area through modification of the lignin nanostructure, which is supposed to increase the unproductive binding of enzymes

Steam Explosion Pretreatment of Beechwood. Part 1: Comparison of the Enzymatic Hydrolysis of Washed Solids and Whole Pretreatment Slurry at Different Solid Loadings

Steam explosion is a well-known process to pretreat lignocellulosic biomass in order to enhance sugar yields in enzymatic hydrolysis, but pretreatment conditions have to be optimized individually for each material. In this study, we investigated how the results of a pretreatment optimization procedure are influenced by the chosen reaction conditions in the enzymatic hydrolysis. Beechwood was pretreated by steam explosion and the resulting biomass was subjected to enzymatic hydrolysis at glucan loadings of 1% and 5% employing either washed solids or the whole pretreatment slurry. For enzymatic hydrolysis in both reaction modes at a glucan loading of 1%, the glucose yields markedly increased with increasing severity and with increasing pretreatment temperature at identical severities and maximal values were reached at a pretreatment temperature of 230 °C. However, the optimal severity was 5.0 for washed solids enzymatic hydrolysis, but only 4.75 for whole slurry enzymatic hydrolysis. When the glucan loading was increased to 5%, glucose yields hardly increased for pretreatment temperatures between 210 and 230 °C at a given severity, and a pretreatment temperature of 220 °C was sufficient under these conditions. Consequently, it is important to precisely choose the desired conditions of the enzymatic hydrolysis reaction, when aiming to optimize the pretreatment conditions for a certain biomass