20 research outputs found
Surface enrichment in equimolar mixtures of non-functionalized and functionalized imidazolium-based ionic liquids
For equimolar mixtures of ionic liquids with imidazolium‐based cations of very different electronic structure, we observe very pronounced surface enrichment effects by angle‐resolved X‐ray photoelectron spectroscopy (XPS). For a mixture with the same anion, that is, 1‐methyl‐3‐octylimidazolium hexafluorophosphate+1,3‐di(methoxy)imidazolium hexafluorophosphate ([C8C1Im][PF6]+[(MeO)2Im][PF6]), we find a strong enrichment of the octyl chain‐containing [C8C1Im]+ cation and a corresponding depletion of the [(MeO)2Im]+ cation in the topmost layer. For a mixture with different cations and anions, that is, [C8C1Im][Tf2N]+[(MeO)2Im][PF6], we find both surface enrichment of the [C8C1Im]+ cation and the [Tf2N]− (bis[(trifluoromethyl)sulfonyl]imide) anion, while [(MeO)2Im]+ and [PF6]− are depleted from the surface. We propose that the observed behavior in these mixtures is due to a lowering of the surface tension by the enriched components. Interestingly, we observe pronounced differences in the chemical shifts of the imidazolium ring signals of the [(MeO)2Im]+ cations as compared to the non‐functionalized cations. Calculations of the electronic structure and the intramolecular partial charge distribution of the cations contribute to interpreting these shifts for the two different cations
Identification of carbon dioxide in an exoplanet atmosphere
Carbon dioxide (CO2) is a key chemical species that is found in a wide range of planetary atmospheres. In the context of exoplanets, CO2 is an indicator of the metal enrichment (that is, elements heavier than helium, also called 'metallicity')1-3, and thus the formation processes of the primary atmospheres of hot gas giants4-6. It is also one of the most promising species to detect in the secondary atmospheres of terrestrial exoplanets7-9. Previous photometric measurements of transiting planets with the Spitzer Space Telescope have given hints of the presence of CO2, but have not yielded definitive detections owing to the lack of unambiguous spectroscopic identification10-12. Here we present the detection of CO2 in the atmosphere of the gas giant exoplanet WASP-39b from transmission spectroscopy observations obtained with JWST as part of the Early Release Science programme13,14. The data used in this study span 3.0-5.5 micrometres in wavelength and show a prominent CO2 absorption feature at 4.3 micrometres (26-sigma significance). The overall spectrum is well matched by one-dimensional, ten-times solar metallicity models that assume radiative-convective-thermochemical equilibrium and have moderate cloud opacity. These models predict that the atmosphere should have water, carbon monoxide and hydrogen sulfide in addition to CO2, but little methane. Furthermore, we also tentatively detect a small absorption feature near 4.0 micrometres that is not reproduced by these models
Nightside clouds and disequilibrium chemistry on the hot Jupiter WASP-43b
Hot Jupiters are among the best-studied exoplanets, but it is still poorly understood how their chemical composition and cloud properties vary with longitude. Theoretical models predict that clouds may condense on the nightside and that molecular abundances can be driven out of equilibrium by zonal winds. Here we report a phase-resolved emission spectrum of the hot Jupiter WASP-43b measured from 5-12 μm with JWST's Mid-Infrared Instrument (MIRI). The spectra reveal a large day-night temperature contrast (with average brightness temperatures of 1524±35 and 863±23 Kelvin, respectively) and evidence for water absorption at all orbital phases. Comparisons with three-dimensional atmospheric models show that both the phase curve shape and emission spectra strongly suggest the presence of nightside clouds which become optically thick to thermal emission at pressures greater than ~100 mbar. The dayside is consistent with a cloudless atmosphere above the mid-infrared photosphere. Contrary to expectations from equilibrium chemistry but consistent with disequilibrium kinetics models, methane is not detected on the nightside (2σ upper limit of 1-6 parts per million, depending on model assumptions)
Recommended from our members
Nightside clouds and disequilibrium chemistry on the hot Jupiter WASP-43b
Hot Jupiters are among the best-studied exoplanets, but it is still poorly understood how their chemical composition and cloud properties vary with longitude. Theoretical models predict that clouds may condense on the nightside and that molecular abundances can be driven out of equilibrium by zonal winds. Here we report a phase-resolved emission spectrum of the hot Jupiter WASP-43b measured from 5 μm to 12 μm with the JWST’s Mid-Infrared Instrument. The spectra reveal a large day–night temperature contrast (with average brightness temperatures of 1,524 ± 35 K and 863 ± 23 K, respectively) and evidence for water absorption at all orbital phases. Comparisons with three-dimensional atmospheric models show that both the phase-curve shape and emission spectra strongly suggest the presence of nightside clouds that become optically thick to thermal emission at pressures greater than ~100 mbar. The dayside is consistent with a cloudless atmosphere above the mid-infrared photosphere. Contrary to expectations from equilibrium chemistry but consistent with disequilibrium kinetics models, methane is not detected on the nightside (2σ upper limit of 1–6 ppm, depending on model assumptions). Our results provide strong evidence that the atmosphere of WASP-43b is shaped by disequilibrium processes and provide new insights into the properties of the planet’s nightside clouds. However, the remaining discrepancies between our observations and our predictive atmospheric models emphasize the importance of further exploring the effects of clouds and disequilibrium chemistry in numerical models.Peer reviewe
Identification of carbon dioxide in an exoplanet atmosphere
Carbon dioxide (CO2) is a key chemical species that is found in a wide range of planetary atmospheres. In the context of exoplanets, CO2 is an indicator of the metal enrichment (that is, elements heavier than helium, also called ‘metallicity’), and thus the formation processes of the primary atmospheres of hot gas giants. It is also one of the most promising species to detect in the secondary atmospheres of terrestrial exoplanets. Previous photometric measurements of transiting planets with the Spitzer Space Telescope have given hints of the presence of CO2, but have not yielded definitive detections owing to the lack of unambiguous spectroscopic identification. Here we present the detection of CO2 in the atmosphere of the gas giant exoplanet WASP-39b from transmission spectroscopy observations obtained with JWST as part of the Early Release Science programme. The data used in this study span 3.0–5.5 micrometres in wavelength and show a prominent CO2 absorption feature at 4.3 micrometres (26-sigma significance). The overall spectrum is well matched by one-dimensional, ten-times solar metallicity models that assume radiative–convective–thermochemical equilibrium and have moderate cloud opacity. These models predict that the atmosphere should have water, carbon monoxide and hydrogen sulfide in addition to CO2, but little methane. Furthermore, we also tentatively detect a small absorption feature near 4.0 micrometres that is not reproduced by these models
Reactivity of Graphene Supported Pt Nanocluster Arrays
Nanocluster arrays on graphene (Gr)
are intriguing model systems
for catalysis. We studied the adsorption and oxidation of CO on Pt/Gr/Rh(111)
with synchrotron-based high-resolution X-ray photoelectron spectroscopy.
On the nanoclusters, CO is found to adsorb at three different sites:
namely, on-top, bridge, and step. The C 1s spectra exhibit remarkable
similarities to those on the stepped Pt(355) surface. Similar to the
case for stepped Pt surfaces, a clear preference for the adsorption
on the step sites is found, while the preference for the adsorption
on the on-top site over the bridge site on the terraces is much less
pronounced in comparison to that on Pt single crystals. Temperature-programmed
X-ray photoelectron spectroscopy revealed an enhanced binding energy
for the cluster step sites, similar to the situation on stepped Pt
surfaces. The oxidation of CO on graphene-supported Pt nanoclusters
follows a pseudo-first-order rate law. Applying an Arrhenius analysis,
we found an activation energy of 13 ± 4 kJ/mol, which is much
smaller than that on Pt(111), due to the more reactive step and kink
sites on the nanoclusters
Pyridine on flat Pt 111 and stepped Pt 355 An in situ HRXPS investigation of adsorption and thermal evolution
Interfacial Behavior of Thin Ionic Liquid Films on Mica
Ultrathin films of two imidazolium-based ionic liquids (ILs), [C 1C1Im][Tf2N] (=1-methyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and [C4C1Im][Tf 2N] (=1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) were deposited on mica surfaces by physical vapor deposition in ultrahigh vacuum. Using angle-resolved X-ray photoelectron spectroscopy (ARXPS), the initial wetting behavior, the growth characteristics, and the molecular arrangement of the ions at the interface were investigated. The measurements were performed on freshly air-cleaved mica surfaces with different carbon precoverages. ARXPS clearly reveals that the initial IL adsorption behavior strongly depends on the amount of preadsorbed carbon: On clean mica, 3D growth (complete dewetting) occurs, whereas on a fully carbon covered surface, initially a complete 2D wetting layer forms, followed by 3D growth. © 2013 American Chemical Society