4,381 research outputs found
Radiation Heat Transfer
The pm-pose of this report is to describe work which has been carried out under the subject grant during the period from April 1, 1961, to October 1, 1961. Technical supervision and guidance of the work was provided by Mr. Seymour Lieblein, Chief, Flow Physics Branch, NASA Lewis Research Center, Cleveland, Ohio
An Engineering Approach to the Variable Fluid Property Problem in Free Convection
An analysis is made for the variable fluid property problem for laminar free convection on an isothermal vertical flat plate. For a number of specific cases, solutions of the boundary layer equations appropriate to the variable property situation were carried out for gases and liquid mercury. Utilizing these findings, a simple and accurate shorthand procedure is presented for calculating free convection heat transfer under variable property conditions. This calculation method is well established in the heat transfer field. It involves the use of results which have been derived for constant property fluids, and of a set of rules (called reference temperatures) for extending these constant property results to variable property situations. For gases, the constant property heat transfer results are generalized to the variable property situation by replacing beta (expansion coefficient) by one over T sub infinity and evaluating the other properties at T sub r equals T sub w minus zero point thirty-eight (T sub w minus T sub infinity). For liquid mercury, the generalization may be accomplished by evaluating all the properties (including beta) at this same T sub r. It is worthwhile noting that for these fluids, the film temperature (with beta equals one over T sub infinity for gases) appears to serve as an adequate reference temperature for most applications. Results are also presented for boundary layer thickness and velocity parameters
Radiant Emission Characteristics of Diffuse Conical Cavities
Radiant-energy emission of diffuse conical cavitie
Thermal Radiation Absorption in Rectangular-Groove Cavities
Thermal radiation absorption in rectangular-groove cavitie
Absorption and Emission Characteristics of Diffuse Spherical Enclosures
The thermal radiation characteristics of spherical cavities are of practical interest in connection with the absorption of radiant energy for both space-vehicle and terrestrial applications. Also, spherical cavities are of potential use as sources of black-body energy. The purpose of this brief paper is to determine both the absorption and emission characteristics of spherical cavities which are diffuse reflectors and emitters
Analysis of laminar forced-convection heat transfer in entrance region of flat rectangular ducts
Laminar free convection on a vertical plate with prescribed nonuniform wall heat flux or prescribed nonuniform wall temperature
Mutually Dependent Heat And Mass Transfer In Laminar Duct Flow
An analysis is performed of the strongly coupled heat and mass transfer processes which result from sublimation of mass from the walls of a duct into a flowing gas, the latent heat being provided solely by convective transfer from the gas. The flow is assumed to be laminar and hydrodynamically developed. Results are given for the stream ward variations of the bulk and wall temperatures and mass fractions, of the heat and mass transfer rates, and of the local heat transfer coefficient. Representative temperature and mass fraction profiles are also presented. Entrance lengths characterizing the near approach to fully developed conditions are tabulated. Comparisons are made of the present results (based on a parabolic velocity profile) with those based on a slug flow velocity profile. A subsidiary analysis using the Lévěque model is also performed, and the results compared with those of the principal solution. Copyright © 1969 American Institute of Chemical Engineer
Comparison of Turbulent Heat-Transfer Results for Uniform Wall Heat Flux and Uniform Wall Temperature
The purpose of this note is to examine in a more precise way how the Nusselt numbers for turbulent heat transfer in both the fully developed and thermal entrance regions of a circular tube are affected by two different wall boundary conditions. The comparisons are made for: (a) Uniform wall temperature (UWT); and (b) uniform wall heat flux (UHF). Several papers which have been concerned with the turbulent thermal entrance region problem are given. 1 Although these analyses have all utilized an eigenvalue formulation for the thermal entrance region there were differences in the choices of eddy diffusivity expressions, velocity distributions, and methods for carrying out the numerical solutions. These differences were also found in the fully developed analyses. Hence when making a comparison of the analytical results for uniform wall temperature and uniform wall heat flux, it was not known if differences in the Nusselt numbers could be wholly attributed to the difference in wall boundary conditions, since all the analytical results were not obtained in a consistent way. To have results which could be directly compared, computations were carried out for the uniform wall temperature case, using the same eddy diffusivity, velocity distribution, and digital computer program employed for uniform wall heat flux. In addition, the previous work was extended to a lower Reynolds number range so that comparisons could be made over a wide range of both Reynolds and Prandtl numbers
Application of Variational Methods to the Thermal Entrance Region of Ducts
A variational method is presented for solving eigenvalue problems which arise in connection with the analysis of convective heat transfer in the thermal entrance region of ducts. Consideration is given, to both situations where the temperature profile depends upon one cross-sectional coordinate (e.g. circular tube) or upon two cross-sectional coordinates (e.g. rectangular duct). The variational method is illustrated and verified by application to laminar heat transfer in a circular tube and a parallel-plate channel, and good agreement with existing numerical solutions is attained. Then, application is made to laminar heat transfer in a square duct as a check, an alternate computation for the square duct is made using a method indicated by Misaps and Pohihausen. The variational method can, in principle, also be applied to problems in turbulent heat transfer
- …