2,269 research outputs found
A Study of the Staining Techniques of Secondary Fibers for the Qualitative Analysis of Contaminants
Identification of the contaminants present in secondary fibers would aid in the reduction of the stickies problem common to the secondary fiber Industry. Presently, Identification and quantitative analysis of stickies is difficult. The staining characteristics of the hotmelts and latexes were studied and used to complete a flow chart analysis of a sample to determine the type and quantity of contaminants. Dupont \u274 and Superlitefast Brilliant Blue dyes were shown to stain the hotmelts. Analysis of a sample through the flow chart developed for this thesis would determine the type and quantity of contaminants present. These results may be used to better determine the effectiveness of contaminant removal by different cleaning methods used in the recycle industry
Results of baseline tests of the Lucas Limousine
The Lucas Limousine, an electric vehicle, was tested to assess the state-of-the-art of electric vehicles. All tests were made without the regenerative braking system and were conducted at the gross vehicle weight of 7,700 pounds. Over a 30 mph stop and go driving cycle the vehicle went 48.4 miles. The vehicle was able to accelerate to 30 mph in about 15 seconds with a gradeability limit of 16.5 percent. As determined by coast down tests the road power and road energy consumption for the vehicle were 2.92 kilowatts and 0.146 kWh/mi, respectively, at 20 mph. At 40 mph the road power requirement was 11.12 kilowatts and the road energy requirement was 0.278 kWh/mi. The maximum energy economy measured 0.45 kilowatt hours per mile at 30 mph and increased to 0.76 kilowatt hours per mile at 50 mph. Over the 30 mph stop and go driving cycle the energy economy was 0.92 kilowatt hours per mile
Baseline tests of the battronic Minivan electric delivery van
An electric passenger vehicle was tested to develop data characterizing the state of the art of electric and hybrid vehicles. The test measured vehicle maximum speed, range at constant speed, range over stop-and-go driving schedules, maximum acceleration, gradeability and limit, road energy consumption, road power, indicated energy consumption, braking capability and battery charge efficiency. The data obtained are to serve as a baseline to compare improvements in electric and hybrid vehicle technologies and to assist in establishing performance standards
Baseline tests of the Kordesh hybrid passenger vehicle
Performance test results are presented for a four-passenger Austin A40 sedan that was converted to a heat-engine-alternator-and battery-powered hybrid. It is propelled by a conventional, gasoline-fueled, heat-engine-driven alternator and a traction pack powering a series-wound, 10 hp direct-current electric drive motor. The 16 hp gasoline engine drives the 7 kilowatt alternator, which provides electrical power to the drive motor or to the 96 volt traction battery through a rectifier. The propulsion battery consists of eight 12 volt batteries connected in series. The electric motor is coupled to a four-speed standard transmission, which drives the rear wheels. Power to the motor is controlled by a three-step foot throttle, which actuates relays that control armature current and field excitation. Conventional hydraulic brakes are used
Baseline tests of the C. H. Waterman DAF electric passenger vehicle
An electric vehicle was tested as part of an Energy Research Development Administration (ERDA) project to characterize the state-of-the-art of electric vehicles. The Waterman vehicle performance test results are presented in this report. The vehicle is a converted four-passenger DAF 46 sedan. It is powered by sixteen 6-volt traction batteries through a three-step contactor controller actuated by a foot throttle to change the voltage applied to the 6.7 kW motor. The braking system is a conventional hydraulic braking system
The table mountain 8-mm-wavelength interferometer
The system components, performance, and calibration of two element radio interferometer operating at 8.33 mm wavelength are discussed. The interferometer employs a 5.5 m and a 3 m diameter antenna on an east-west baseline of 60 or 120 m, yielding fringe spacings at transit of 28 or 14 in. respectively. The broad intermediate frequency bandpass of 100 to 350 MHz and the system noise temperature of 500 K provide high sensitivity for the measurement of continuum sources. The interferometer has been used for high resolution studies of the planets and the Sun, and it is currently being adapted to study solar flare emissions at high spatial and time resolution
The ties that bind: Knowledge-seeking networks and auditor job performance
The dissemination of knowledge in audit firms is a critical process that has gone relatively unexamined by researchers. Using social network analysis to quantify the knowledge-seeking networks in a Big 4 audit firm in the U.S., we examine the association between the types and patterns of knowledge-seeking ties and individual auditor performance. Our initial finding is that auditor job performance is negatively associated with the number of knowledge-seeking ties. Further, our analyses demonstrate that this negative association is being driven by explicit knowledge-seeking rather than tacit knowledge-seeking activities and is stronger for higher-ranked auditors. Thus, knowledge-seeking by auditors may come at a cost, particularly when that knowledge is codifiable and when the seeking is done by those at higher levels of the firm. In a post-hoc analysis, we find that tacit knowledge-seeking ties to managers can be beneficial for auditor performance, and tacit knowledge-seeking ties to senior managers and partners is sometimes detrimental. In sum, this suggests that who is seeking knowledge and who is being sought for knowledge are both important for performance. Our findings may assist researchers to better understand how auditors leverage their social connections to learn, which in turn may affect audit efficiency and effectiveness. Further, audit firms might benefit from better understanding the consequences of knowledge-seeking from different sources and use this understanding to make decisions that maximize desirable information flows
For common community phylogenetic analyses, go ahead and use synthesis phylogenies
Should we build our own phylogenetic trees based on gene sequence data, or can we simply use available synthesis phylogenies? This is a fundamental question that any study involving a phylogenetic framework must face at the beginning of the project. Building a phylogeny from gene sequence data (purposeâbuilt phylogeny) requires more effort, expertise, and cost than subsetting an already available phylogeny (synthesisâbased phylogeny). However, we still lack a comparison of how these two approaches to building phylogenetic trees influence common community phylogenetic analyses such as comparing community phylogenetic diversity and estimating trait phylogenetic signal. Here, we generated three purposeâbuilt phylogenies and their corresponding synthesisâbased trees (two from Phylomatic and one from the Open Tree of Life, OTL). We simulated 1,000 communities and 12,000 continuous traits along each purposeâbuilt phylogeny. We then compared the effects of different trees on estimates of phylogenetic diversity (alpha and beta) and phylogenetic signal (Pagelâs λ and Blombergâs K). Synthesisâbased phylogenies generally yielded higher estimates of phylogenetic diversity when compared to purposeâbuilt phylogenies. However, resulting measures of phylogenetic diversity from both types of phylogenies were highly correlated (Spearmanâs Ï > 0.8 in most cases). Mean pairwise distance (both alpha and beta) is the index that is most robust to the differences in tree construction that we tested. Measures of phylogenetic diversity based on the OTL showed the highest correlation with measures based on the purposeâbuilt phylogenies. Trait phylogenetic signal estimated with synthesisâbased phylogenies, especially from the OTL, was also highly correlated with estimates of Blombergâs K or close to Pagelâs λ from purposeâbuilt phylogenies when traits were simulated under Brownian motion. For commonly employed community phylogenetic analyses, our results justify taking advantage of recently developed and continuously improving synthesis trees, especially the Open Tree of Life.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/151322/1/ecy2788_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/151322/2/ecy2788.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/151322/3/ecy2788-sup-0001-AppendixS1.pd
Rates of niche and phenotype evolution lag behind diversification in a temperate radiation
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.Environmental change can create opportunities for increased rates of lineage diversification, but continued species accumulation has been hypothesized to lead to slowdowns via competitive exclusion and niche partitioning. Such density-dependent models imply tight linkages between diversification and trait evolution, but there are plausible alternative models. Little is known about the association between diversification and key ecological and phenotypic traits at broad phylogenetic and spatial scales. Do trait evolutionary rates coincide with rates of diversification, are there lags among these rates, or is diversification niche-neutral? To address these questions, we combine a deeply sampled phylogeny for a major flowering plant cladeâSaxifragalesâwith phenotype and niche data to examine temporal patterns of evolutionary rates. The considerable phenotypic and habitat diversity of Saxifragales is greatest in temperate biomes. Global expansion of these habitats since the mid-Miocene provided ecological opportunities that, with density-dependent adaptive radiation, should result in simultaneous rate increases for diversification, niche, and phenotype, followed by decreases with habitat saturation. Instead, we find that these rates have significantly different timings, with increases in diversification occurring at the mid-Miocene Climatic Optimum (âŒ15 Mya), followed by increases in niche and phenotypic evolutionary rates by âŒ5 Mya; all rates increase exponentially to the present. We attribute this surprising lack of temporal coincidence to initial niche-neutral diversification followed by ecological and phenotypic divergence coincident with more extreme cold and dry habitats that proliferated into the Pleistocene. A lack of density-dependence contrasts with investigations of other cosmopolitan lineages, suggesting alternative patterns may be common in the diversification of temperate lineages
Nested radiations and the pulse of angiosperm diversification: increased diversification rates often follow whole genome duplications
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/111924/1/nph13491-sup-0001-FigS1-TableS1-S2.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/111924/2/nph13491.pd
- âŠ