Fatigue damage mapping

Observations of fatigue crack nucleation and early growth are presented. The state of stress/strain was shown to play a significant role in this process. Early growth occurs on planes experiencing the largest range of shear strain (Mode 2) or normal strain (Mode 1) depending on the stress state, strain amplitude, and microstructure. These observations were summarized in a fatigue map for each material. These maps provide regions where one fatigue failure mode dominates the behavior. Each failure mechanism results in a different failure mode. Once the expected failure mode is identified, bulk deformation models based on the cyclic stresses and strains can be used to obtain reliable estimates of fatigue lives for complex loading situations

The relationship between observed fatigue damage and life estimation models

Observations of the surface of laboratory specimens subjected to axial and torsional fatigue loadings has resulted in the identification of three damage fatigue phenomena: crack nucleation, shear crack growth, and tensile crack growth. Material, microstructure, state of stress/strain, and loading amplitude all influence which of the three types of fatigue damage occurs during a dominant fatigue life fraction. Fatigue damage maps are employed to summarize the experimental observations. Appropriate bulk stress/strain damage parameters are suggested to model fatigue damage for the dominant fatigue life fraction. Extension of the damage map concept to more complex loadings is presented

Pengaruh Likuiditas, Kualitas Aktiva, Sensitivitas, Efisiensi dan Solvabilitas terhadap Return On Asset (ROA) pada BUSN Devisa

The purpose of the research is to determine LDR, IPR, LAR, APB, NPL, PDN, IRR, BOPO, FBIR, PR and FACR have significant influence toward ROA. This research explains how the independent varibles affect dependent variable. Independent variables are LDR, IPR, LAR, APB, NPL, PDN, IRR, BOPO, FBIR, PR and FACR while the independent variable is Return On Asset (ROA). The subject of the research there are PT Bank Capital Indonesia, Tbk, PT Bank China Construction, Tbk, PT Bank Jtrust Indonesia, Tbk. And the technique that used on this research is multiple linier regression. The result of the research showed that LDR, IPR, LAR, APB, NPL, PDN, IRR, BOPO, FBIR, PR, and FACR simultaneously have a significant influence toward Return On Asset (ROA). BOPO is the only one variable that have a significant influence partially toward ROA. Keywords : Exchange foreign national private banks, ROA

Exciton and Carrier Dynamics in 2D Perovskites

Two-dimensional Ruddlesden-Popper hybrid lead halide perovskites have become a major topic in perovskite optoelectronics. Here, we aim to unravel the ultrafast dynamics governing the evolution of charge carriers and excitons in these materials. Using a combination of ultrabroadband time-resolved THz (TRTS) and fluorescence upconversion spectroscopies, we find that sequential carrier cooling and exciton formation best explain the observed dynamics, where exciton-exciton interactions play an important role in the form of Auger heating and biexciton formation. We show that the presence of a longer-lived population of carriers is due to these processes and not to a Mott transition. Therefore, excitons still dominate at laser excitation densities. We use kinetic modeling to compare the phenethylammonium and butylammonium organic cations while investigating the stability of the resulting films. In addition, we demonstrate the capability of using ultrabroadband TRTS to study excitons in large binding energy semiconductors through spectral analysis at room temperature

Outcomes for patients with EBV-positive PTLD post-allogeneic HCT after failure of rituximab-containing therapy

Enfermedad linfoproliferativa; Virus de Epstein-BarrMalaltia limfoproliferativa; Virus d'Epstein-BarrLymphoproliferative disease; Epstein-Barr virusEpstein–Barr virus-positive (EBV+) post-transplant lymphoproliferative disease (PTLD) is an ultra-rare and aggressive condition that may occur following allogeneic hematopoietic cell transplant (HCT) due to immunosuppression. Approximately half of EBV+ PTLD cases are relapsed or refractory (R/R) to initial rituximab-containing therapy. There are limited treatment options and no standard of care for patients with R/R EBV+ PTLD, and little is known about their treatment history and outcomes. We performed a multinational, multicenter, retrospective chart review of patients with R/R EBV+ PTLD following HCT to describe patients’ demographic and disease characteristics, treatment history, and overall survival (OS) from rituximab failure. Among 81 patients who received initial treatment with rituximab as monotherapy (84.0%) or in combination with chemotherapy (16.0%), median time from HCT to PTLD diagnosis was 3.0 months and median OS was 0.7 months. Thirty-six patients received a subsequent line of treatment. The most frequent causes of death were PTLD (56.8%), graft-versus-host disease (13.5%) and treatment-related mortality (10.8%). In multivariate analysis, early PTLD onset and lack of response to initial treatment were associated with mortality. This real-world study demonstrates that the prognosis of patients with R/R EBV+ PTLD following HCT remains poor, highlighting the urgent unmet medical need in this population

Estimating the orientation of crack initiation planes under constant and variable amplitude multiaxial fatigue loading

This paper investigates the accuracy of the shear strain Maximum Variance Method (γ–MVM) and Maximum Damage Method (MDM) in predicting the orientation of crack initiation planes under both constant and variable amplitude multiaxial fatigue loading. The γ–MVM defines the critical plane as the plane on which the variance of the resolved shear strain reaches its maximum value. In contrast, a specific multiaxial fatigue criterion is needed to be used along with the MDM to predict the orientation of the critical plane under multiaxial fatigue loading. As far as variable amplitude multiaxial loading is concerned, the MDM have to be used by applying with a certain fatigue criterion, a cycle counting method and a cumulative damage rule. In this paper, the MDM is applied with Fatemi & Socie’s criterion, Bannantine & Socie’s cycle counting method and Palmgren-Miner’s linear rule. The MDM assumes that the critical plane is the plane experiencing the maximum accumulated damage. Experimental data for several metals tested under constant and variable amplitude multiaxial fatigue loading taken from literature are used to assess the accuracy of these two methodologies. The results show that the predictions made by both the γ–MVM and MDM have good accuracy for the investigated materials and investigated load histories: 90% of the predictions made by the γ–MVM and 80% of the predictions made by the MDM fall within a scatter band of 20%

Gait Variability and Multiple Sclerosis

Gait variability, that is, fluctuations in movement during walking, is an indicator of walking function and has been associated with various adverse outcomes such as falls. In this paper, current research concerning gait variability in persons with multiple sclerosis (MS) is discussed. It is well established that persons with MS have greater gait variability compared to age and gender matched controls without MS. The reasons for the increase in gait variability are not completely understood. Evidence indicates that disability level, assistive device use, attentional requirement, and fatigue are related to gait variability in persons with MS. Future research should address the time-evolving structure (i.e., temporal characteristics) of gait variability, the clinical importance of gait variability, and underlying mechanisms that drive gait variability in individuals with MS

Breakthrough invasive fungal disease in patients receiving posaconazole primary prophylaxis: a 4-year study

AbstractPosaconazole (PSC) is currently recommended as primary prophylaxis in neutropenic patients with acute myeloid leukaemia (AML) and in allogenic haematopoietic stem cell transplantation (AHSCT) recipients with graft-versus-host disease (GVHD). Studies focusing on breakthrough invasive fungal disease (IFD) upon PSC prophylaxis show disparate results. In order to evaluate the incidence of IFD in patients on PSC prophylaxis and identify IFD risk factors, we carried out a retrospective study of all consecutive patients on PP from January 2007 to December 2010 in our hospital. Breakthrough IFDs were identified from the database of the central pharmacy and the French administrative database (PMSI), registering final medical diagnoses of hospitalized patients. Medical data were reviewed to study proven or probable IFD, according to EORTC/MSG definition. PSC plasma concentrations (PPC) were also retrieved. Poisson models were used for statistical analysis. Two hundred and seventy-nine patients received PSC prophylaxis for a median duration of 1.4 months (range 0.2–17.9). Proven (n = 6) or probable (n = 3) IFDs were diagnosed in nine cases (3.2%). IFD incidence rate per 100 person-month was 1.65 (95% CI, 0.79–2.97). IFDs were candidaemia (Candida glabrata, n = 2), pulmonary invasive aspergillosis (n = 3), disseminated fusariosis (n = 2) and pulmonary mucormycosis (n = 2). Seven deaths were reported, directly related to IFD in three patients (33.3%). First dosage of PPC under 0.3 mg/L was the single significant risk factor for IFD (RR, 7.77; 95% CI, 1.30–46.5; p 0.025). Breakthrough IFD in patients receiving PSC prophylaxis is rare but associated with a poor outcome. Low PSC plasma concentrations are associated with an increased risk of IFD

Proportional/non-proportional constant/variable amplitude multiaxial notch fatigue: cyclic plasticity, non-zero mean stresses, and critical distance/plane

This paper deals with the formulation and experimental validation of a novel fatigue lifetime estimation technique suitable for assessing the extent of damage in notched metallic materials subjected to in‐service proportional/nonproportional constant/variable amplitude multiaxial load histories. The methodology being formulated makes use of the Modified Manson‐Coffin Curve Method, the Shear Strain–Maximum Variance Method, and the elasto‐plastic Theory of Critical Distances, with the latter theory being applied in the form of the Point Method. The accuracy and reliability of our novel fatigue lifetime estimation technique were checked against a large number of experimental results we generated by testing, under proportional/nonproportional constant/variable amplitude axial‐torsional loading, V‐notched cylindrical specimens made of unalloyed medium‐carbon steel En8 (080M40). Specific experimental trials were run to investigate also the effect of non‐zero mean stresses as well as of different frequencies between the axial and torsional stress/strain components. This systematic validation exercise allowed us to demonstrate that our novel multiaxial fatigue assessment methodology is remarkably accurate, with the estimates falling within an error factor of 2. By modelling the cyclic elasto‐plastic behaviour of metals explicitly, the design methodology being formulated and validated in the present paper offers a complete solution to the problem of estimating multiaxial fatigue lifetime of notched metallic materials, with this holding true independently of sharpness of the stress/strain raiser and complexity of the load history