12 research outputs found

    Etiologia da mancha foliar e resistência genética em Eucalyptus benthamii à Calonectria metrosideri e Calonectria spathulata

    Get PDF
    Orientador: Prof. Dr. Celso Garcia AuerCoorientadores: Prof. Dr. Álvaro Figueredo dos Santos, Prof. Dr. Evandro Vagner TambarussiTese (doutorado) - Universidade Federal do Paraná, Setor de Ciências Agrárias, Programa de Pós-Graduação em Engenharia Florestal. Defesa : Curitiba, 28/02/2019Inclui referênciasÁrea de concentração: SilviculturaResumo: A mancha foliar no eucalipto incitada pelos fungos do gênero Calonectria (anamorfo Cylindrocladium) é, atualmente, uma das principais doenças da cultura que ocasiona lesões nas folhas do hospedeiro. Assim, os objetivos desta pesquisa foram caracterizar a etiologia da mancha foliar em testes de progênies de Eucalyptus benthamii e avaliar o controle genético da doença, a fim de selecionar indivíduos resistentes como suporte para condução de futuros programas de melhoramento genético florestal. O experimento, constituído de 85 progênies e seis testemunhas com sintomas de mancha foliar, foi replicado em três municípios nos estados de Santa Catarina e Paraná, Brasil, e avaliado quanto à resistência à doença utilizando como ferramentas a incidência e severidade da doença aos 10, 16 e 27 meses de idade. Foi utilizada uma escala de avaliação de severidade que variou de zero (sem a doença) a quatro (desfolha até 2/3 da árvore). Caracteres morfológicos e sequências de DNA de duas regiões gênicas: ?-tubulina (TUB) e calmodulina (CAL) foram usados para identificar as espécies fúngicas, indicando as espécies Calonectria metrosideri e Calonectria spathulata como os agentes causais da mancha. Este é o primeiro relato de ambas as espécies em E. benthamii e o primeiro relato de Ca. metrosideri em plantios do gênero Eucalyptus em nível mundial. Os fungos foram reisolados de folhas doentes cumprindo os postulados de Koch, sendo verificado que Ca. spathulata foi mais agressivo que Ca. metrosideri. Os sintomas da doença atingiram todas as árvores e resultaram em mais de 50% de desfolha da copa em árvores com mais de dois anos de idade. Os resultados das análises genéticas demonstraram haver variabilidade genética nas populações. As estimativas de herdabilidade média de progênies (?????? ?? ) variaram de 0,14 a 0,64 nas análises individuais; e na análise conjunta foi de 0,39, o que sugere elevados ganhos genéticos para seleção nos locais. Ocorreram superestimativas de mais de 100% para os ganhos genéticos de seleção ao considerar E. benthamii como espécie alógama quando, de fato, possui sistema reprodutivo misto. A avaliação conjunta revelou correlação genética das progênies de 0,62; valor abaixo do recomendado pela literatura para a formação de uma única zona de melhoramento para os três locais, indicando que a seleção de materiais resistentes à mancha deverá ser realizada para cada local. Pesquisas como esta são de grande relevância ao setor florestal para contornar esse tipo de problema e auxiliar na tomada de decisões. Palavras-chave: Seleção genética; Doença foliar; Eucalyptus, Herdabilidade, Sistema misto de reprodução.Abstract: Leaf spots in eucalypts, triggered by fungi of the genus Calonectria (anamorph Cylindrocladium), is currently one of the main diseases affecting the crop, causing lesions on the leaves of the host. Thus, the objectives of this research were to characterize leaf spot etiology in progenies of Eucalyptus benthamii, evaluate genetic control of the disease, and identify resistant individuals that could provide the basis for future forest genetic improvement programs. The experiment consisted of 85 progenies and six controls with symptoms of leaf spots, replicated in three municipalities in the states of Santa Catarina and Paraná, Brazil. Progenies were evaluated for resistance to disease based on the incidence and severity of the disease at 10, 16, and 27 months of age. The severity evaluation scale ranged from zero (without the disease) to four (defoliation of up to 2/3 of the tree). Morphological characteristics and DNA sequences from two gene regions, ?-tubulin (TUB) and calmodulin (CAL), identified the causal agents of the leaf spots as the fungal species Calonectria metrosideri and Calonectria spathulata. This is the first report of both species in E. benthamii and the first report of Ca. metrosideri in Eucalyptus plantations worldwide. The fungi were re-isolated from diseased leaves to fulfill the Koch postulates, and Ca. spathulata was identified as more aggressive than Ca. metrosideri. Symptoms of the disease were found in all trees and resulted in more than 50% canopy defoliation in two-year-old trees. The results of the genetic analyses showed genetic variability in the populations. The mean heritability estimates of progenies (?????? ?? ) ranged from 0.14 to 0.64 in individual analyses and 0.39 in the joint analysis, suggesting high genetic gains for selection at each site. In terms of genetic selection gains, overestimates of more than 100% were observed when considering E. benthamii as an allogamous species rather than its actual mixed reproductive system. The joint evaluation revealed a genetic correlation of progenies of 0.62, a value below that recommended in the literature for the formation of a single improvement zone for the three sites. This indicates that the selection of leaf spot resistant genetic material should be performed for each site. Research such as the current study is of great significance to the forestry sector in order to overcome this problem and help inform decision making. Keywords: Genetic selection; leaf disease; Eucalyptus, Heritability, Mixed-mating system

    Precision and accuracy of sampling methods in thinned Pinus taeda L. stands

    Get PDF
    Different sampling methods can be used in forest surveys. It is important to know the precision and accuracy of these sampling methods, and which one is the most appropriate in specific conditions of the forest population. The aim of this study was to compare estimates of a forest inventory performed by different sampling methods with forest census results. The sampling methods evaluated were the fixed-area method and the variable-area methods of Bitterlich, Prodan, and Strand. The data were obtained in a 15-year-old thinned stand of Pinus taeda L., located in the municipality of Teixeira Soares, southern Brazil, with a total area of 12.80 ha. Initially, the forest census was carried out, and subsequently, the sample units for each sampling method were distributed in the stand, with a common starting point. The variables used to compare the sample results with the census means were quadratic diameter, number of trees, basal area, and volume, per hectare. Precision and accuracy were evaluated by sampling error and whether the confidence intervals covered the population means, respectively. The fixed-area and Bitterlich methods stood out in precision for all variables analysed. The fixed-area, Bitterlich and Strand methods with proportion to height provided more accurate estimates. The Prodan method provided inaccurate and imprecise estimates for the variables under analysis, except for the quadratic diameter

    Modeling of growth and yield by pluviometric precipitation classes for Eucalyptus sp.

    Get PDF
    Uma das etapas fundamentais na modelagem do crescimento e produção é a identificação dos sítios, geralmente determinados pela relação entre altura dominante e idade. Porém há situações em que se torna interessante o uso de outras variáveis, como a precipitação pluviométrica, devido à grande correlação com a produtividade do povoamento. O objetivo deste estudo foi verificar a influência da estratificação por classes de precipitação pluviométrica no crescimento e produção volumétrica de Eucalyptus sp. Os dados provêm de plantios de híbridos de Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S. T. Blake, do estado da Bahia, distribuídos em sete classes de precipitação, consideradas como estratos conforme o teste de Dette e Neumeyer (2001). Foram determinados os índices de sítio a cada classe de precipitação, sendo utilizada a área basal inicial média em cada um desses sítios. O modelo de Clutter foi empregado para a modelagem e as estimativas de produção foram comparadas pelo teste F de Graybill. A precipitação média influenciou no crescimento em altura dominante. A modelagem realizada por classe de precipitação gerou resultados similares àqueles obtidos pela modelagem sem estratificação, porém com maior precisão, sendo considerada adequada para estimar a produção para povoamentos clonais de eucalipto.Palavras-chave: Eucalipto; ANCOVA não paramétrica; modelo de Clutter. AbstractModeling of growth and yield by pluviometric precipitation classes for Eucalyptus sp. One of the key steps in modeling of growth and yield is the identification of different sites, which are generally determined by the relation of dominant height and age. However, there are situations in which it becomes interesting to use other variables, such as pluviometric precipitation, due to the high correlation with the productivity of the stand. This research aims to investigate influence of stratification by classes of precipitation in volumetric growth and yield of Eucalyptus sp. We collected data in hybrid stands of Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S. T. Blake, from the state of Bahia, Brazil; such stands were distributed in seven classes of precipitation, each considered a site accordingly to Dette and Neumeyer (2001) test. We determined the site index for each class of precipitation, using the initial average basal area in each site. The Clutter model was used for modeling, and production estimates compared by Graybill F test. The average precipitation influenced the dominant height growth. The modeling performed by precipitation classes generated similar results to those obtained by modeling without stratification, but more accurately; we can consider it appropriate to estimate production to clonal eucalyptus stands.Keywords: Eucalypt; nonparametric ANCOVA; Clutter model.AbstractOne of the key steps in modeling of growth and yield is the identification of different sites, which are generally determined by the relation of dominant height and age. However, there are situations in which it becomes interesting to use other variables, such as pluviometric precipitation, due to the high correlation with the productivity of the stand. This research aims to investigate influence of stratification by classes of precipitation in volumetric growth and yield of Eucalyptus sp. We collected data in hybrid stands of Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S. T. Blake, from the state of Bahia, Brazil; such stands were distributed in seven classes of precipitation, each considered a site accordingly to Dette and Neumeyer (2001) test. We determined the site index for each class of precipitation, using the initial average basal area in each site. The Clutter model was used for modeling, and production estimates compared by Graybill F test. The average precipitation influenced the dominant height growth. The modeling performed by precipitation classes generated similar results to those obtained by modeling without stratification, but more accurately; we can consider it appropriate to estimate production to clonal eucalyptus stands.Keywords: Eucalypt; nonparametric ANCOVA; Clutter model

    FUNGOS ASSOCIADOS À MANCHA FOLIAR EM Eucalyptus benthamii Maiden et Cambage NA REGIÃO SUL DO BRASIL

    Get PDF
    Um dos fatores mais importantes que influenciam no sucesso de plantios florestais é a fitossanidade dos mesmos. Doenças foliares causadas por fungos têm sido frequentemente constatadas em plantios de eucalipto em diversas regiões do Brasil. O objetivo deste trabalho foi avaliar os sintomas e identificar os fungos causadores de mancha foliar em testes de procedência e progênies de Eucalyptus benthamii em três locais na região sul do Brasil. A avaliação foi realizada em São Mateus do Sul (PR), Mafra (SC) e Porto União (SC) aos 10, 16 e 27 meses de idade dos plantios. Foi verificada a frequência e os sintomas dos fungos que ocasionaram a doença. Os gêneros Cylindrocladium e Pestalotiopsis foram constatados em todas as avaliações nos três locais de estudo. Por meio dos fungos identificados, Cylindrocladium sp. foi o de maior frequência e é tido como o principal agente causador da mancha foliar nas populações de E. benthamii avaliadas

    Potencial de seleção em uma população de Eucalyptus grandis Hill ex Maiden, para resistência à mancha foliar e ao cancro

    Get PDF
    The use of resistant genotypes is one of the main methods of disease control in Brazil, the genetic improvement, aiming to obtain new genotypes that are resistant is fundamental to supply this demand. Therefore, the objective of this work was to estimate the genetic parameters of the variables: resistance to canker caused by Chrysoporthe cubensis and leaf spot caused by Cylindrocladium spp. and Kirramyces epicoccoides, and to evaluate their implications for the genetic improvement strategy of Eucalyptus grandis. An open pollination progeny test was installed in two locations in the state of São Paulo, in the regions of Anhembi and Itatinga. The test was carried out in randomized blocks, with 176 progenies and three witnesses, one per plot, with 30 repetitions in Itatinga and 28 repetitions in the Anhembi region. The canker resistance was assessed at 12, 24 and 29 months of age in the Anhembi region and at 15, 27 and 32 months of age in the Itatinga region. The resistance to leaf spot was evaluated. at 12 and 24 months of age in the Anhembi region and at 15 and 27 months of age in the Itatinga region. The genetic parameters were estimated using the SELEGEN REML/BLUP® software. It was found out, with the same selection population for the Itatinga region, estimates of genetic parameters indicate greater potential for the selection of resistant genotypes for canker and leaf spot. However, for the edaphoclimatic conditions of the Anhembi region, this population has a lower selection potential, which is evidenced by the low values of the estimated average progeny and individual heritability. In the region of Itatinga, values of average progeny and individual heritability were obtained for resistance to canker and leaf spot, which varied from moderate to high, indicating that there may be good gains with the selection in this location.O uso de genótipos resistentes é um dos principais métodos de controle de doenças no Brasil, sendo fundamental o melhoramento genético visando a obter novos genótipos resistentes, para suprir essa demanda. Assim, o objetivo deste trabalho foi estimar os parâmetros genéticos das variáveis resistência ao cancro, causado por Chrysoporthe cubensis e resistência à mancha foliar, causada por Cylindrocladium spp. e Kirramyces epicoccoides, bem como avaliar suas implicações na estratégia de melhoramento genético de Eucalyptus grandis. Foi instalado um teste de progênies de polinização aberta, em dois locais no Estado de São Paulo, nas regiões de Anhembi e Itatinga. O teste foi realizado em blocos casualizados, com 176 progênies e três testemunhas, uma por parcela, com 30 repetições em Itatinga e 28 repetições na região de Anhembi. A resistência ao cancro foi avaliada aos 12, 24 e 29 meses de idade na região de Anhembi e aos 15, 27 e 32 meses de idade, na região de Itatinga. A resistência à mancha foliar foi avaliada aos 12 e 24 meses de idade na região de Anhembi e aos 15 e 27 meses de idade, na região de Itatinga. Os parâmetros genéticos foram estimados, utilizando o software SELEGEN REML/BLUP®. Com a mesma população de seleção, verificou-se que, para a região de Itatinga, as estimativas de parâmetros genéticos indicam maior potencial para a seleção de genótipos resistentes ao cancro e à mancha foliar. Porém, para as condições edafoclimáticas da região de Anhembi, essa população apresenta potencial de seleção inferior, o que fica evidenciado pelos baixos valores de herdabilidade média individual de progênies estimados. Na região de Itatinga, foram obtidos valores de herdabilidade média individual de progênies para a resistência ao cancro e à mancha foliar, que variaram de moderado a alto, indicando que pode haver bons ganhos com a seleção neste local

    Germinação, morfologia e sanidade de sementes de Psidium rufum DC. (Myrtaceae)

    Get PDF
    Orientador : Prof. Dr. Antonio Carlos NogueiraCoorientadores : Dr. Álvaro Figueredo dos Santos, Dr. Antonio Nascim Kalil FilhoDissertação (mestrado) - Universidade Federal do Paraná, Setor de Ciências Agrárias, Programa de Pós-Graduação em Engenharia Florestal. Defesa: Curitiba, 25/02/2015Inclui referências : fls. 63-76Área de concentração : SilviculturaResumo: Este trabalho teve como objetivo obter informações sobre a germinação, morfologia e sanidade de sementes de Psidium rufum DC (Myrtaceae). Para a análise da germinação foram testados diferentes substratos: rolo de papel, papel mata-borrão, areia e vermiculita, e três diferentes temperaturas: 20, 25 e 30 °C, com cinco repetições de 40 sementes para cada tratamento. Com o melhor substrato e temperatura, testou-se a presença e ausência de luz na germinação da espécie. Para a descrição e ilustração morfológica, foram utilizadas 100 sementes e frutos, selecionados aleatoriamente. A identificação dos fungos associados às sementes foi realizada pelos métodos papel-filtro e batata-dextrose-ágar. Para verificar a transmissão dos fungos para as plântulas, foram semeadas quatro repetições de 25 sementes para cada lote de sementes em vermiculita. Testou-se a patogenicidade dos fungos Pestalotiopsis sp. e Cylindrocladium sp. às plântulas de P. rufum. Os melhores resultados para o teste de germinação foram obtidos com o substrato papel mata-borrão na temperatura de 25 °C. Para P. rufum, a luz influencia na germinação, sendo a espécie considerada como fotoblástica positiva preferencial. A germinação foi iniciada no 15º dia após a instalação do teste e pode ser encerrada no 37º dia. Os frutos da espécie são lisos, brilhosos, glabros, de cor vermelho-arroxeado quando maduros, de forma globosa, carnosos e indeiscentes tipo bacóide. Podem apresentar de 1 a 7 sementes. As sementes são campilótropas, reniformes, com tegumento liso, opaco e pétreo, apresentam endosperma oleaginoso de coloração creme. O embrião é do tipo pimentóide e a germinação é epígea e fanerocotiledonar. A plântula possui cotilédones foliáceos, de cor verde-clara, com margem inteira, nervuras pouco marcadas, superfície lisa, forma ovada, base aguda e ápice agudo. A raiz é axial, cilíndrica, sinuosa, de coloração castanho-claro. Os eofilos são opostos cruzados, simples, peciolados, membranáceos e elípticos, com margem inteira, ápice e base agudos. Os fungos potencialmente patogênicos encontrados foram Cylindrocladium sp., Pestalotiopsis sp. e Cladosporium sp., e os fungos saprófitas Penicillium sp. e Chaetomium sp. Não houve transmissão de fungos das sementes para as plântulas de P. rufum, sendo constatado que o fungo Cylindrocladium sp. é patogênico em folhas de plântulas da espécie. Palavras-chave: Psidium rufum, germinação, morfologia vegetal, fungos em sementes.Abstract: Objective of this study was to obtain information about the germination, morphology and sanity of Psidium rufum DC. For the analysis of germination were tested different substrates: paper roll, blotter paper, sand and vermiculite, and three different temperatures: 20 °C, 25 °C and 30 °C, with five replicates of 40 seeds for each treatment. After determining the best substrate and temperature was tested the presence and absence of light on germination of specie. To describe and illustrate the morphology fruits and seeds, were used 100 randomly seeds and fruits. The identification of fungi associated with seeds was performed by the methods of blotter test and potato-dextrose-agar. To check the transmission of the fungi to seedlings were sown four replicates of 25 seeds for each seed lot in vermiculite. Tested the pathogenicity of fungi Pestalotiopsis sp. and Cylindrocladium sp. seedlings of P. rufum. The best results for the germination test were obtained with the blotter paper substrate at a temperature of 25 ° C. The light influences germination of P. rufum, the specie considered as the preferred positive photoblastic. The germination was started on the 15th day after the installation of the test and can be closed on the 37th day. The fruits of this species are smooth, shiny, hairless, red-purple color when ripe, rounded shape, fleshy and indehiscent bacóide type. Can submit 1 to 7 seeds. The seeds are campylotropous, reniform, with seed coat smooth, opaque and stone, oleaginous endosperm cream color. The embryo is the pimentóide type and germination is epigeal and phanerocotylar. The seedling has foliaceous cotyledons, light green color, with entire margin, slightly marked ribs, smooth, ovate shape, acute base and apex acute. The root is axial, cylindrical, winding, light brown color. Eophylls are crossed opposite, simple, petiolate, membranous and elliptical, with entire margin, apex and acute base. The fungi potentially pathogenic found were Cylindrocladium sp., Pestalotiopsis sp. and Cladosporium sp., and the saprophytic fungi Penicillium sp. and Chaetomium sp. There was no transmission of fungi from seeds to seedlings of P. rufum, it is observed that the fungus Cylindrocladium sp. is pathogenic in leaves of seedlings of the species. Key-words: Psidium rufum, germination, plant morphology, seed fungi

    SUBSTRATE AND TEMPERATURE ON SEED GERMINATION OF Aspidosperma vargasii A. DC. (Apocynaceae)

    Get PDF
    A Amazônia é detentora de uma ampla diversidade, incluindo espécies florestais com potencial madeireiro e não madeireiro, as quais muitas vezes tem seu uso restringido por carência de informações silviculturais. Assim, o presente estudo objetivou avaliar o efeito de diferentes substratos e temperaturas na germinação de sementes de Aspidosperma vagarsii. Para tanto, seguiu-se a premissa de um delineamento inteiramente casualizado, em esquema fatorial 3 x 3, sendo três substratos (papel, areia e vermiculita) e três temperaturas (20, 25 e 30 °C). Foram determinados: a porcentagem de germinação, índice de velocidade de germinação e tempo médio de germinação, além da confecção dos gráficos de frequência relativa de germinação. Ainda, determinou-se o peso de mil sementes, número de sementes por quilo e o grau de umidade do lote estudado. O peso de mil sementes foi igual a 276,4 g, com 3.618 sementes por quilo, e grau de umidade de 9,5%. Não houve interação entre os fatores estudados sendo que o substrato areia e as temperaturas de 20 e 25 °C apresentaram os melhores resultados para germinação das sementes de A. vargasii em laboratório

    PROPRIEDADES FÍSICO-QUÍMICAS DE RESÍDUOS AGROFLORESTAIS AMAZÔNICOS PARA USO COMO SUBSTRATO

    Get PDF
    Na Amazônia, são produzidas anualmente grandes quantidades de resíduos agroflorestais, o que demanda pesquisas para avaliar a viabilidade técnica, econômica e ambiental desses materiais como, por exemplo, sua utilização como substrato na produção de mudas florestais. O objetivo do estudo foi determinar as propriedades físicas e químicas de materiais com potencial para substrato, como casca de amendoim, casca de arroz in natura, pó de serra semidecomposto, resíduo de açaí, casca de cupuaçu, casca de café, casca de coco verde e casca de castanha-do-brasil. Foram avaliados os teores totais de nitrogênio (N), Ca, K, P, Mg, Cu, Fe, Mn, Zn, além do pH em água, densidade, capacidade de retenção de água (CRA) e relação poro/sólido.  A casca de castanha apresentou os maiores valores na maioria das características avaliadas, exceto para a capacidade de retenção de água. O resíduo que apresentou as menores quantidades de nutrientes ou baixos valores das características físicas analisadas foi o pó de serra. Palavra-chave: produção de mudas, uso agrícola, Amazônia.   PHYSICO-CHEMICAL PROPERTIES OF AMAZON AGROFORESTRY RESIDUES FOR USE AS SUBSTRATE ABSTRACT In the Amazon are produced annually large quantities of residues, which demand agroforestry research to assess the technical, economic and environmental viability of the agricultural use of these materials as, for example, a substrate for forest seedling production. The objective of this study was to determine physical and chemical properties of the following materials with potential for substrate: peanut husk, rice husk in natura, sawdust semidecomposed, açai residues, cupuassu bark, coffee husk, green coconut husk and bark of brown-of-brazil. Were evaluated total contents of N, K, Ca, P, Mg, Cu, Fe, Mn, Zn; besides the pH in water, density, water retention capacity (CRA) and the P/S ratio. The bark of brown-of-brazil presented the highest values for the majority of evaluated characteristics, except for the water retention capacity. The residue that presented the smallest quantities of nutrients or low values of physical characteristics analyzed was the sawdust. Keywords: seedling production, agricultural use, Amazon. DOI: http://dx.doi.org/10.14583/2318-7670.v02n03a0

    MODELAGEM DO CRESCIMENTO E PRODUÇÃO EM CLASSES DE PRECIPITAÇÃO PLUVIOMÉTRICA PARA Eucalyptus sp.

    No full text
    AbstractOne of the key steps in modeling of growth and yield is the identification of different sites, which are generally determined by the relation of dominant height and age. However, there are situations in which it becomes interesting to use other variables, such as pluviometric precipitation, due to the high correlation with the productivity of the stand. This research aims to investigate influence of stratification by classes of precipitation in volumetric growth and yield of Eucalyptus sp. We collected data in hybrid stands of Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S. T. Blake, from the state of Bahia, Brazil; such stands were distributed in seven classes of precipitation, each considered a site accordingly to Dette and Neumeyer (2001) test. We determined the site index for each class of precipitation, using the initial average basal area in each site. The Clutter model was used for modeling, and production estimates compared by Graybill F test. The average precipitation influenced the dominant height growth. The modeling performed by precipitation classes generated similar results to those obtained by modeling without stratification, but more accurately; we can consider it appropriate to estimate production to clonal eucalyptus stands.Keywords: Eucalypt; nonparametric ANCOVA; Clutter model.Uma das etapas fundamentais na modelagem do crescimento e produção é a identificação dos sítios, geralmente determinados pela relação entre altura dominante e idade. Porém há situações em que se torna interessante o uso de outras variáveis, como a precipitação pluviométrica, devido à grande correlação com a produtividade do povoamento. O objetivo deste estudo foi verificar a influência da estratificação por classes de precipitação pluviométrica no crescimento e produção volumétrica de Eucalyptus sp. Os dados provêm de plantios de híbridos de Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S. T. Blake, do estado da Bahia, distribuídos em sete classes de precipitação, consideradas como estratos conforme o teste de Dette e Neumeyer (2001). Foram determinados os índices de sítio a cada classe de precipitação, sendo utilizada a área basal inicial média em cada um desses sítios. O modelo de Clutter foi empregado para a modelagem e as estimativas de produção foram comparadas pelo teste F de Graybill. A precipitação média influenciou no crescimento em altura dominante. A modelagem realizada por classe de precipitação gerou resultados similares àqueles obtidos pela modelagem sem estratificação, porém com maior precisão, sendo considerada adequada para estimar a produção para povoamentos clonais de eucalipto.Palavras-chave: Eucalipto; ANCOVA não paramétrica; modelo de Clutter. AbstractModeling of growth and yield by pluviometric precipitation classes for Eucalyptus sp. One of the key steps in modeling of growth and yield is the identification of different sites, which are generally determined by the relation of dominant height and age. However, there are situations in which it becomes interesting to use other variables, such as pluviometric precipitation, due to the high correlation with the productivity of the stand. This research aims to investigate influence of stratification by classes of precipitation in volumetric growth and yield of Eucalyptus sp. We collected data in hybrid stands of Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S. T. Blake, from the state of Bahia, Brazil; such stands were distributed in seven classes of precipitation, each considered a site accordingly to Dette and Neumeyer (2001) test. We determined the site index for each class of precipitation, using the initial average basal area in each site. The Clutter model was used for modeling, and production estimates compared by Graybill F test. The average precipitation influenced the dominant height growth. The modeling performed by precipitation classes generated similar results to those obtained by modeling without stratification, but more accurately; we can consider it appropriate to estimate production to clonal eucalyptus stands.Keywords: Eucalypt; nonparametric ANCOVA; Clutter model

    GENETIC GAIN FROM DIFFERENT SELECTION METHODS IN Eucalyptus macarthurii PROGENIES IN DIFFERENT ENVIRONMENTS

    No full text
    The aims of this research was to estimate genetic parameters of Eucalyptus macarthurii progenies and to predict genetic gain for different selection methods. In order to evaluate the gains, eleven progenies tests were studied. These tests were installed in 1997, in randomized blocks design, in two sites, with 5 replicates of five plants per plot. The progenies were evaluated, from the first to the eighth year, regarding the variable diameter at breast height (DBH). The genetic parameters were estimated using the mixed model procedure (REML/BLUP). The selection of the progenies for establishing a Clonal Seed Orchard was based on the analysis by location, joint analysis and on the harmonic mean of the relative performance of genotypic values (HMRPGV) with different selection intensities among and within families: three, four, five and six individuals per progeny with the selection of the top 30 individuals, taking into consideration the effective population size (eN). The best age to carry out the selection was seven years old, however, early selection can be made from age two onwards. Each environment characteristics influenced progenies phenotypic expression, so the higher gains in balance with eN, were estimated with the selection of individuals for each site, and the selection of five or six individuals per progeny
    corecore