6,680 research outputs found

    Occupational Polarization on Brazilian Labor Market, 1985-2015

    Get PDF
    The objective of this paper is to analyze employment and wages in occupational structure of Brazilian labor market considering the gender gap as well The analysis is based on information from 1985 to 2015 and estimates from income equations Results showed that occupational polarization was more evident for women during the three analyzed decades as these women broadened their participation on labor market regarding occupations that were more abstract and manual non-routine as professionals and technicians in the first group and domestic services in the second group On the other hand men suffered deep transformations in occupational structure regarding manual and routine activities from agricultural activities to production and operational ones It was verified a reduction in inequality in wage distribution with the increase of average wages although occupations that broadened the demand for labor had relative increase in wages which suggests polarization in women s paymen

    Development of new hybrid gene delivery carriers

    Get PDF
    Gene therapy has gained increased attention over the last decades due to the possibility to treat a disease at its routes. Several vehicles intended to carry and deliver a functional copy of the deficient gene have been developed. Amongst these, viral vectors are highly effective systems, capable to deliver the genetic cargo to the nucleus. However, these carriers have raised safety concerns regarding to immunogenicity and insertional mutagenesis, creating the need to develop equally efficient vehicles with higher safety profiles. Therefore, non-viral vectors have been suggested as an alternative to viral gene transfer methods, as these overcome some of the drawbacks presented by viral vectors. The main goal of this project was to develop safe and effective non-viral gene carriers, using solid lipid nanoparticles (SLNs) with surface modulated properties. SLNs with surface modulated properties using polyethyleneimine (PEI) combined, or not, with protamine, were produced by hot high shear homogenization. The obtained particles possessed sizes <300 nm suitable for intravenous administration, and good physical stability for 3 months, under the different storage conditions tested (4ºC, room temperature and 37ºC). Moreover, these particles showed good plasmid condensation levels and were able to deliver the gene into the nucleus. Additionally, no cytotoxic effects concerning membrane integrity and metabolic activity of HEK 293-T cells were observed after 24 h of exposition. In conclusion, the developed nanoparticles presented suitable properties for gene delivery, with high capacity to condense DNA and transfect cells without cytotoxicity

    Free Hanging Catenary Riser with Steel and Titanium

    Get PDF
    Deepwater developments are becoming increasingly common in several parts of the world. Although the technological advances have grown exponentially since the first development in such great depth, challenges are still faced regarding the harsh environmental conditions. Considering that, the riser system is a critical part of the subsea architecture. The Steel Catenary Riser (SCR) is usually the preferred option for deep and ultra-deep waters when its feasibility is ensured. However, this type of riser is very sensitive to the host platform's large motions due to the harsh environment. The large motion has the downward velocity at the hang-off point as a critical component, which can induce high levels of fatigue in that location and at the touchdown point (TDP). Thus, risers are usually designed with a flex joint on their top end, reducing or eliminating the fatigue issues in this area. For the TDP, other alternatives have been studied. An alternative that has been considered is the implementation of a titanium section on the touchdown area (TDA) of an SCR, which feasibility in a deepwater and harsh environment is the focus of this work. A comparison with a conventional SCR is made in order to evaluate how the titanium affects the response on the TDA. Results of the strength analyses showed that the SCR is unsuitable when the downward velocity is 3.8 m/s. By implementing the titanium section, which material has higher yield strength, the riser can cope with that downward velocity. The fatigue performance of the risers is checked considering the wave-induced fatigue. The conventional SCR demonstrates to have high fatigue damage, resulting in only 3.5 years on the TDP, which can be explained by its results on the strength analysis. On the other hand, the SCR with a titanium section has a fatigue life of over 20,000 years at the TDP, demonstrating it can improve the results significantly. Sensitivity studies are presented and explain how the riser with titanium is affected by changes in the section length, wall and coating thicknesses, and hang-off angle. Overall, this thesis shows the feasibility of an SCR with a titanium section on the TDA when applied on a spread moored FPSO in deepwater and harsh environmental conditions. Keywords: Deep water, SCR, SCR with titanium section, Extreme Response Analysi

    THE ADDED WORKER EFFECT IN BRAZIL: : WIFE RESPONSE TO THE HEAD OF HOUSEHOLD’S UNEMPLOYMENT (2012 TO 2017)

    Get PDF
    When the principal responsible for the family loses his or her job, it is hoped that, in attempting to maintain the level of family income, another member of the family will become part of the workforce; when this occurs, it has an added worker effect. Thus, the objective of this work is to test the hypothesis of the presence of the additional worker effect for the wife when confronting the unemployment of the head of the family in Brazil. Therefore, we used continuous Pnad information from 2012 to 2017 and variations in the specifications of models’ logit for the wife’s transitions into the job market. It was found that the loss of the job of the head of household has a strong effect on the labour supply of the spouse, mainly in the transition from inactivity to unemployment. It was also found that, in addition to the unemployment of the head of the family, there are other factors that explain the transitions of the spouse in the labour market, particularly when small children are present in households. These factors indicated that the lower the age of these children is, the lower the likelihood of wives participating in the labour market

    Os empregados da agricultura brasileira: diferenciais e determinantes salariais

    Get PDF
    This work studies the wage differentials and determinants of the employees in Brazilian agriculture, in period 1981-2005, on the basis of the information of the National Research for Sample of Domiciles of the IBGE. The methodology of Heckman is used to correct bias of selection, common in wage equations gotten by Least Ordinary Square, besides the decomposition of Oaxaca-Blinder, to analyze the wage differentials between 1981 and 2005. Between wage determinants, had been analyzed: education, experience, region, weekly working time and formal work, besides some macroeconomic determinants. The results of the work suggest a reduction of the wage differentials, mainly in the end of the studied period, and that the variable education, age and formal work had contributed to reduce the wage differentials between 1981 and 2005; and on the other hand, the variable geographic region and weekly working time, had contributed to increase them. Moreover, the macroeconomic variables included in the analysis were statistical significant in the explanation of the agricultural differentials.wages, Heckman, decomposition of Oaxaca., Agribusiness, J31, J43,

    Adipose stromal vascular fraction cell sheets as vascular strategies for tissue engineering and regenerative medicine applications

    Get PDF
    Tese de mestrado em Engenharia Biomédica e Biofísica, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2015A Engenharia de Tecidos (TE), uma subárea da Medicina Regenerativa (RM), surge como uma tentativa de reparar doenças ou defeitos usando células, tecidos e biomateriais, isoladamente ou em combinação, para restaurar ou melhorar funções biológicas. A Engenharia de Cell Sheet (CS) é uma técnica de TE baseada em células que usa superfícies de cultura sensíveis a estímulos de temperatura para fabricar monocamadas celulares intactas e robustas que podem ser implantadas sem requerer o apoio de um scaffold, evitando assim algumas das várias restrições às quais eles estão associados. A criação de estruturas de CS viáveis e espessas, necessárias para regenerar tecidos mais robustos como o osso, é limitada pela falta de estratégias de vascularização eficazes, antes da implantação. A falta de vascularização adequada resulta, muitas vezes, em necrose celular e rejeição da estrutura sendo, por isso, uma das maiores preocupações na área da TE. Na comunidade científica, diversas estratégias foram propostas neste sentido, muitas delas envolvendo o uso de células endoteliais que, embora bastante promissoras, enfrentam múltiplos desafios como sendo as fontes de células e a estabilidade dos novos vasos sanguíneos formados. A estratégia aqui descrita resulta de uma optimização dos diferentes aspectos relativos à cultura celular para obter CS capazes de desenvolver, in vitro, uma rede de estruturas semelhantes a capilares sem adição de factores de crescimento extrínsecos. Estas CS são derivadas do isolamento da fracção vascular estromal (SVF) do tecido adiposo após dissociação enzimática por acção da colagenase. Este tecido tem vindo a destacar-se na comunidade científica pelas suas características: é abundante, prescindível e pode ser facilmente obtido. Para além disso, a SVF é considerada como sendo detentora de um potencial angiogénico intrínseco, em virtude do tipo de células que a compõem. As células da SVF isoladas a partir de tecido proveniente de lipoaspirações foram distribuídas por placas estéreis de 24 poços numa densidade de 2x105 células nucleadas/poço e cultivadas em condições de normóxia (21%) e hipóxia (5% de oxigénio) com meio basal durante 8 dias. Foram efectuados diversos testes in vitro após terem sido atingidos os time points de 5 e 8 dias, nomeadamente citometria de fluxo (também efectuada imediatamente após o isolamento), quantificação de ADN, ensaios de matrigel e scratch, ELISA, imunocitoquímica e western blot. Para além disso, foram também efectuados ensaios in vivo após indução de isquemia nos membros posteriores que foram avaliados por imunohistoquímica, hibridização in situ e laser Doppler. A análise dos marcadores de superfície das células da SVF por citometria de fluxo evidenciou que a expressão dos marcadores endotelial CD 31 e hematopoiético CD 34 decresce ao longo do tempo, o que seria expectável uma vez que a cultura foi efectuada em meio basal, sem adição de factores de crescimento extrínsecos. Na literatura, a SVF do tecido adiposo é descrita como sendo composta por diversas populações de células, incluindo células estromais, endoteliais e hematopoiéticas, facto que foi comprovado nesta análise. Os resultados relativos à proliferação celular de células da SVF mostram que não há diferenças significativas entre as condições de normóxia e hipóxia sugerindo que a proliferação destas células não é afetada significativamente pelas concentrações de oxigénio. A imunocitoquímica realizada para os marcadores CD 31 e para o CD 146, o qual marca péricitos, demonstram a organização de células da SVF em estruturas tipo capilares para ambas as condições, embora o nível de ramificação tenha sido mais complexo em hipóxia para 8 dias. A comprovar este facto, a quantificação das estruturas tipo capilares no Angiogenesis Analyzer, um plug-in do programa Image J, destacou que as formações seriam mais maduras e organizadas nessas mesmas condições. Esse facto tornou-se mais evidente num dos dadores devido ao decréscimo no número de segmentos e malhas formados pelas células ao longo do tempo, sendo que o nível de ramificação se manteve praticamente inalterado. Isso traduziu-se em segmentos mais alongados e interconectados entre si. Foi levantada a hipótese de que a secreção de factores de crescimento pelas células em condições de hipóxia poderia estar envolvida neste efeito. Como tal, foram efectuados diversos ensaios utilizando os meios condicionados recolhidos das culturas em diferentes condições. Um ensaio de matrigel utilizando um extracto de membrana basal proteico que favorece a angiogénese, evidenciou um aumento na formação de estruturas tipo capilares pelas células endoteliais cultivadas em meio condicionado hipóxico. Os mesmos meios condicionados aumentaram a migração de células estaminais do tecido adiposo humano (hASCs) num ensaio scratch, quando comparados com os meios recolhidos de normóxia. O ensaio scratch é um ensaio baseado na raspagem da zona central de uma monocamada celular para avaliar a migração das células em torno da área erodida, sob diferentes condições. A produção de factores de crescimento avaliada por meio de ELISA sugeriu uma maior secreção do VEGF para condições de hipóxia. Colocou-se a hipótese que este facto poderia estar relacionado com a estabilização das subunidades dos HIFs (hypoxia inducible factors) em condições de concentrações baixas de oxigénio. OS HIFs são uma família de factores de transcrição constituída por três subunidades principais HIF-1, HIF-2 e HIF-3 e os seus respectivos heterodímeros (alfa e beta). As subunidades alfa respondem a variações na concentração de oxigénio e sob condições de oxigénio atmosféricas (normóxia) são constantemente expressas e degradadas no citoplasma, mais concretamente no proteassoma. Em condições de stress de oxigénio estas subunidades migram para o núcleo onde se ligam aos seus heterodímeros, os quais são constitutivamente expressos, e estabilizam. Esta estabilização resulta num aumento da secreção de diversos factores de crescimento responsáveis pela regulação do metabolismo da glucose, eritropoiese e angiogénese como sendo o VEGF e o PDGF. Deste modo, foi efectuada uma análise por western blot para o HIF-1α a qual destacou bandas mais proeminentes para condições de hipóxia. Paralelamente às condições de hipóxia e normóxia foram também testadas a incubação das células com um inibidor da subunidade HIF-1α e com cloreto de cobalto II, um indutor químico de condições de hipóxia. Como seria expectável, a banda obtida na análise de western blot para o inibidor foi bastante ténue contrariamente à obtida com o mimetizador das condições de hipóxia. Em imunocitoquímica isto reflectiu-se num fraco e proeminente desenvolvimento das estruturas tipo capilares, respectivamente, facto que veio reforçar a hipótese proposta. Finalmente, depois da manutenção das CS por 8 dias em condições de normóxia e hipóxia foi efectuada a sua implantação in vivo em ratinhos durante 33 dias, após indução de isquemia no membro posterior. A imunohistoquímica dos explantes recuperados executada para os marcadores endotelial CD 31 e perivascular α-SMA destacou uma melhoria na neo-angiogénese em condições de hipóxia por comparação com as de normóxia e controlos. Foi efectuado também um ensaio de hibridização in situ para localizar as células humanas nos explantes e verificou-se que algumas destas células permaneciam na área da implantação em torno dos novos vasos sanguíneos formados. Os resultados obtidos através do laser Doppler demonstram que a perfusão dos vasos sanguíneos aumentou nos animais em que foram transplantadas as cell sheets. Para além disso, foi observado que nos animais que receberam as cell sheets provenientes de culturas em hipóxia havia uma tendência para uma recuperação mais rápida do fluxo sanguíneo. Tendo em consideração todos os resultados obtidos é importante salientar o excelente potencial da estratégia aqui descrita que resulta da combinação de diversos conceitos como sendo, condições de hipóxia, células da SVF e Engenharia de Cell Sheet (CS) para criar unidades de vascularização funcionais para TE e RM.Tissue Engineering (TE), a subfield of Regenerative Medicine, arises as an attempt to repair diseases or defects by using cells, tissues and biomaterials isolated or in combination, to restore or improve biological functions. Cell sheet (CS) engineering is a TE cell-based technique that uses stimuli-responsive culture surfaces to fabricate robust and intact cell monolayers that can be implanted without requiring the support of a scaffold. The creation of viable thick CS constructs is limited by the lack of suitable vascularization strategies prior to implantation. The herein described strategy results from the optimization of different aspects of cell culture to obtain cell sheets capable of developing a capillary-like network in vitro without adding extrinsic growth factors. These cell sheets are derived from the isolation of the stromal vascular fraction (SVF) of adipose tissue, which is composed of different cell populations including stromal, endothelial and hematopoietic cells, holding thus an intrinsic angiogenic potential. The culture was performed with basal medium in normoxic (pO2 = 21%) and hypoxic (pO2 = 5%) conditions for up to 8 days. Cell proliferation results showed no significant differences between all conditions. Immunocytochemistry performed with the endothelial marker CD 31 and CD 146 that stains pericytes demonstrated the organization of SVF cells in capillary-like structures for both conditions, although the level of branching was much more complex in hypoxia. It was hypothesized that the secretion of growth factors by cells was involved in this effect. A matrigel assay using conditioned media from the different conditions showed increased formation of capillary-like structures by endothelial cells cultured in hypoxic conditioned media. The same conditioned media increased the migration of human adipose stem cells (hASCs) in a scratch assay, when compared with media collected from normoxia. The production of growth factors assessed through ELISA suggested higher secretion of VEGF for hypoxia although statistical analysis showed no significant differences by comparison with normoxia. Western blot for HIF-1α expression highlighted more prominent bands for hypoxic conditions. In vivo implantation of cell sheets cultured for 8 days in normoxia and hypoxia following a hind limb ischemia model showed improved neo-angiogenesis as evidenced by immunohistochemistry and laser Doppler. These results highlight the outstanding potential of combining hypoxic conditions and SVF cells to create cell sheets that can be used as functional vascularization units for TE and RM

    A formação outdoor como instrumento de melhoria das competências essenciais ao trabalho em equipa (CCA) : um estudo quasi-experimental com militares

    Get PDF
    Tese de mestrado, Psicologia (Psicologia dos Recursos Humanos, do Trabalho e das Organizações), Universidade de Lisboa, Faculdade de Psicologia, 2010Os CCA (Conhecimentos, Competências e Aptidões) de Trabalho em Equipa são essenciais para o sucesso das organizações actuais e desenvolvê-los nas equipas torna-se crucial. Uma vez que o Team-building é apontado como intervenção apropriada ao desenvolvimento dos CCA, o presente estudo pretende explorar o papel específico da formação outdoor enquanto método adequado à melhoria dos CCA de Trabalho em Equipa. Foi utilizada uma amostra de 47 militares da Força Aérea Portuguesa e os resultados demonstraram, através da análise Anova com Medidas Repetidas, que a hipótese colocada é parcialmente suportada – a formação outdoor desenvolve os CCA de Planeamento e Coordenação de Tarefas. Deste modo, os resultados enfatizam a importância que a formação outdoor tem aquando da formação em equipa, por darem um primeiro passo na clarificação do seu papel enquanto instrumento de incremento dos CCA de Trabalho em Equipa e por voltarem a atenção para os planos de formação das equipas que compõem as nossas organizações, em particular, à escolha do método. É necessária investigação futura que replique este estudo, utilizando amostras de maior número e outros contextos para aprofundarmos o papel da formação outdoor com os restantes CCA.The KSAs (Knowledge, Skill, and Ability requirements for Teamwork) are essential for the success of organizations and to develop them is crucial. Since the Team-building is identified as the appropriate intervention for the development of KSAs, this study aims to explore the specific role of outdoor training as a suitable method for improving the KSAs. By applying Anova with Repeated Measures to a sample of 47 Portuguese Airmen, it was demonstrated that the raised hypothesis is partially supported - the outdoor training develops the KSAs of Planning and Tasks Coordination. Thus, the results emphasize the importance that outdoor training has, for giving a first step in clarifying its role as a means of increasing the KSAs and by turning the attention to team training plans, in particular, the choice of the method. Future research is needed to replicate this study using bigger samples and other contexts to deepen the analysis of the role of outdoor training with other KSAs
    corecore