Ideal magnetohydrodynamic simulations of unmagnetized dense plasma jet injection into a hot strongly magnetized plasma

We present results from three-dimensional ideal magnetohydrodynamic simulations of unmagnetized dense plasma jet injection into a uniform hot strongly magnetized plasma, with the aim of providing insight into core fueling of a tokamak with parameters relevant for ITER and NSTX (National Spherical Torus Experiment). Unmagnetized dense plasma jet injection is similar to compact toroid injection but with much higher plasma density and total mass, and consequently lower required injection velocity. Mass deposition of the jet into the background appears to be facilitated via magnetic reconnection along the jet's trailing edge. The penetration depth of the plasma jet into the background plasma is mostly dependent on the jet's initial kinetic energy, and a key requirement for spatially localized mass deposition is for the jet's slowing-down time to be less than the time for the perturbed background magnetic flux to relax due to magnetic reconnection. This work suggests that more accurate treatment of reconnection is needed to fully model this problem. Parameters for unmagnetized dense plasma jet injection are identified for localized core deposition as well as edge localized mode (ELM) pacing applications in ITER and NSTX-relevant regimes.Comment: 16 pages, 8 figures and 2 tables; accepted by Nuclear Fusion (May 11, 2011

Equivalent frame modelling of an unreinforced masonry building with flexible diaphragms - a case study

A case study was conducted to investigate the applicability of the equivalent frame modelling for the nonlinear time-history analysis of unreinforced masonry buildings with flexible diaphragms. The dynamic responses calculated from the equivalent frame models were compared against shake table test results of a full-scale two-storey stone masonry building. The investigated modelling approach reflected the simplifications commonly assumed for the global analysis of buildings; namely, considering the diaphragms to behave elastically and neglecting the stiffness and strength contributions of the out-of-plane responding walls. The sensitivity of the analysis to different idealisations of the equivalent frame, as well as to the diaphragm stiffness values, were also investigated. Discussions are provided on the accuracies and limitations of the investigated modelling approach, which may serve as a useful guidance for practical application.Yasuto Nakamura, Hossein Derakhshan, Abdul H. Sheikh, Jason M. Ingham, and Michael C. Griffit

Effects of Seawater on Setting Time and Compressive Strength of Concretes with Different Richness

Water is one of the main constituents of concrete. Although many types of water exist, fresh water is the mostly used in concrete industry. Fresh water is expected to be in a great shortage by 2050 according to UN world water development report. Incorporating seawater in concrete mixture can help in the expected problem of scarcity of fresh water. Also, in many cases seawater may be the only available water especially in coastal regions. Many reports mention various possibilities of using seawater in concrete without detrimental effect on concrete properties. In this study another beneficial effect of seawater over tap water was concluded. Setting tests of cement paste mixed with seawater was determined using Vicat apparatus and compared to tap water. Compressive strength tests at the age of 28 days of Portland cement concretes with varied quantity of cement i.e. 300, 350, 400, 450, and 500 kg, and mixed with seawater was also performed and compared to tap water. The results show that seawater affects standard consistency of cement paste and two percent increase was required in order to attain the same consistency as tap water. It shows also seawater slightly accelerates initial setting of cement but the effect is not so pronounced so as to cause a trouble in concrete and final setting time almost remains unaltered. Compressive strength tests show an increase in concrete strength mixed with seawater for all tested mixtures and depending on quantity of cement. It also shows a beneficial effect of seawater on compressive strength of rich concrete with quantity of cement 450 and 500 kg over tap water. Doi: 10.28991/cej-2021-03091695 Full Text: PD

Percutaneous transhepatic biliary stenting

Objective: Bilary stenting with endoprosthesis is a palliative procedure to relieve malignant biliary obstruction. Percutaneous transhepatic technique has been employed whenever endoscopic technique was not possible or had failed.SETTING: Angiography/intervention suite, department of radiology, Aga Khan University hospital, Karachi.Methods: We present retrospective analysis of 17 patients with malignant jaundice who were treated with percutaneous techniques after the endoscopic route had failed.Results: The success rate was 94% with placement of single plastic stent in 14 patients, double stents in 3 patients and self-expandable stent in one patient. The overall complication rate was 41% including sepsis, liver abscess, biloma formation, biliary leakage and stent occlusion. There was one procedure related death due to severe sepsis.CONCLUSION: Percutaneous transhepatic biliary stenting is an alternative procedure to relieve malignant biliary obstruction with high complication rate and should be reserved for selected patients in whom endoscopic route has failed

Superdeformed Band in ^{36}Ar Described by Projected Shell Model

The projected shell model implements shell model configuration mixing in the projected deformed basis. Our analysis on the recently observed superdeformed band in $^{36}$Ar suggests that the neutron and proton 2-quasiparticle and the 4-quasiparticle bands cross the superdeformed ground band at the same angular momentum. This constitutes a picture of band disturbance in which the first and the second band-crossing, commonly seen at separate rotation frequencies in heavy nuclei, occur simultaneously. We also attempt to understand the assumptions of two previous theoretical calculations which interpreted this band. Electromagnetic properties of the band are predicted.Comment: 4 pages and 2 figures, accepted by Phys. Rev. C as a Rapid Communicatio

A simple approach for synthesis, characterization and bioactivity of bovine bones to fabricate the polyurethane nanofiber containing hydroxyapatite nanoparticles

In the present study, we had introduced polyurethane (PU) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination of bovine bones. Typically, a colloidal gel consisting of HAp/PU had been electrospun to form nanofibers. In this communication, physiochemical aspects of prepared nanofibers were characterized by FE-SEM, TEM and TEM-EDS, which confirmed that nanofibers were well-oriented and good dispersion of HAp NPs, over the prepared nanofibers. Parameters, affecting the utilization of the prepared nanofibers in various nano-biotechnological fields have been studied; for instance, the bioactivity of the produced nanofiber mats was investigated while incubating in simulated body fluid (SBF). The results from incubation of nanofibers, indicated that incorporation of HAp strongly activates the precipitation of the apatite-like particles, because of the HAp NPs act as seed, that accelerate crystallization of the biological HAp from the utilized SBF