Milling cutting tool diagnosis using comparisons of the excitation identified by cepstral techniques

This paper investigates the diagnosis of cutting tools in a milling operation using vibration signals and proposes a signal processing algorithm to achieve that. In the proposed algorithm, the impulse response of the measured vibration signal is firstly identified using the random decrement technique. This is then converted to a cepstrum and subtracted from the measured signal in the quefrency domain using the additive properties of cepstra. The residual signal representing the forcing function is then transformed back into the time domain using the inverse cepstrum. Finally the power spectral density is estimated, and a comparison is made between the different states of the cutting tool. For a good estimation of the force, four measurement points are used, and the identified excitation sources are then averaged. By comparing the spectra of the forcing functions, the efficiency of the method is demonstrated, and the faulty case is clearly distinguished from the fault-free case. This was not the case with the original response signals

Characterisation of the n_TOF 20 m beam line at CERN with the new spallation target

The n_TOF facility hosts CERN's pulsed neutron source, comprising two beam lines of different flight paths and one activation station. It is based on a proton beam delivered by the PS accelerator impinging on a lead spallation target. During Long Shutdown 2 (LS2) at CERN (2019-2021), a major upgrade of the spallation target was carried out in order to optimize the performances of the neutron beam. Therefore, the characteristics of n_TOF two experimental areas were investigated in detail. In this work, the focus is on the second experimental area (EAR2), located 20 m above the spallation target. Preliminary results of the neutron energy distribution and beam line energy resolution are presented, compared to previous experimental campaigns and Monte Carlo simulations with the FLUKA code. Moreover, preliminary results of the spatial beam profile measurements are shown

Developing policy-relevant biodiversity indicators : lessons learnt from case studies in Africa

There is an increasing need for monitoring schemes that help understand the evolution of the global biodiversity crisis and propose solutions for the future. Indicators, including temporal baselines, are crucial to measure the change in biodiversity over time, to evaluate progress towards its conservation and sustainable use and to set conservation priorities. They help design and monitor national and regional policies on biodiversity; they also feed into national reporting on international agreements such as the Convention on Biological Diversity and the Sustainable Development Goals. We analyse the methodological approach of five small African projects resulting from a call to promote indicator development, improve monitoring capacity and strengthen the science-policy interface in the field of biodiversity. We compared their approach to existing guidance provided by the international community, specifically the Biodiversity Indicators Partnership. To this end, we assess whether internationally recommended steps are effectively applied to national/local biodiversity monitoring in selected developing countries. We also present lessons learnt from workshop interactions between partners involved in these projects. Through our pilot projects we identified data availability and data accessibility, together with the involvement of stakeholders, as critical steps in indicator development. Moreover, there is a need for a better awareness and a wider application of the indicator concept itself. Hence, training of key actors both in the policy and science spheres is needed to operationalize indicators and ensure their continuity and sustainability. We hope that these case studies and lessons learnt can stimulate and support countries in the Global South to formulate policy-relevant biodiversity indicators.Peer reviewe

Doping liquid argon with xenon in ProtoDUNE Single-Phase: effects on scintillation light

Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen

Dynamics of ampicillin-resistant Enterococcus faecium clones colonizing hospitalized patients: data from a prospective observational study

<p>Abstract</p> <p>Background</p> <p>Little is known about the dynamics of colonizing <it>Enterococcus faecium </it>clones during hospitalization, invasive infection and after discharge.</p> <p>Methods</p> <p>In a prospective observational study we compared intestinal <it>E. faecium </it>colonization in three patient cohorts: 1) Patients from the Hematology Unit at the University Hospital Basel (UHBS), Switzerland, were investigated by weekly rectal swabs (RS) during hospitalization (group 1a, n = 33) and monthly after discharge (group 1b, n = 21). 2) Patients from the Intensive Care Unit (ICU) at the University Medical Center Utrecht, the Netherlands (group 2, n = 25) were swabbed weekly. 3) Patients with invasive <it>E. faecium </it>infection at UHBS were swabbed at the time of infection (group 3, n = 22). From each RS five colonies with typical <it>E</it>. <it>faecium </it>morphology were picked. Species identification was confirmed by PCR and ampicillin-resistant <it>E. faecium </it>(ARE) isolates were typed using Multiple Locus Variable Number Tandem Repeat Analysis (MLVA). The Simpson's Index of Diversity (SID) was calculated.</p> <p>Results</p> <p>Out of 558 ARE isolates from 354 RS, MT159 was the most prevalent clone (54%, 100%, 52% and 83% of ARE in groups 1a, 1b, 2 and 3, respectively). Among hematological inpatients 13 (40%) had ARE. During hospitalization, the SID of MLVA-typed ARE decreased from 0.745 [95%CI 0.657-0.833] in week 1 to 0.513 [95%CI 0.388-0.637] in week 3. After discharge the only detected ARE was MT159 in 3 patients. In the ICU (group 2) almost all patients (84%) were colonized with ARE. The SID increased significantly from 0.373 [95%CI 0.175-0.572] at week 1 to a maximum of 0.808 [95%CI 0.768-0.849] at week 3 due to acquisition of multiple ARE clones. All 16 patients with invasive ARE were colonized with the same MLVA clone (<it>p </it>< 0.001).</p> <p>Conclusions</p> <p>In hospitalized high-risk patients MT159 is the most frequent colonizer and cause of invasive <it>E. faecium </it>infections. During hospitalization, ASE are quickly replaced by ARE. Diversity of ARE increases on units with possible cross-transmission such as ICUs. After hospitalization ARE are lost with the exception of MT159. In invasive infections, the invasive clone is the predominant gut colonizer.</p

Identification and genotyping of bacteria from paired vaginal and rectal samples from pregnant women indicates similarity between vaginal and rectal microflora

Background: The vaginal microflora is important for maintaining vaginal health and preventing infections of the reproductive tract. The rectum has been suggested as the major source for the colonisation of the vaginal econiche. Methods: To establish whether the rectum can serve as a possible bacterial reservoir for colonisation of the vaginal econiche, we cultured vaginal and rectal specimens from pregnant women at 35-37 weeks of gestation, identified the isolates to the species level with tRNA intergenic length polymorphism analysis (tDNA-PCR) and genotyped the isolates for those subjects from which the same species was isolated simultaneously vaginally and rectally, by RAPD-analysis. One vaginal and one rectal swab were collected from a total of each of 132 pregnant women at 35-37 weeks of gestation. Swabs were cultured on Columbia CNA agar and MRS agar. For each subject 4 colonies were selected for each of both sites, i.e. 8 colonies in total. Results: Among the 844 isolates that could be identified by tDNA-PCR, a total of 63 bacterial species were present, 9 (14%) only vaginally, 26 (41%) only rectally, and 28 (44%) in both vagina and rectum. A total of 121 (91.6%) of 132 vaginal samples and 51 (38.6%) of 132 rectal samples were positive for lactobacilli. L. crispatus was the most frequently isolated Lactobacillus species from the vagina (40% of the subjects were positive), followed by L. jensenii (32%), L. gasseri (30%) and L. iners (11%). L. gasseri was the most frequently isolated Lactobacillus species from the rectum (15%), followed by L. jensenii (12%), L. crispatus (11%) and L. iners (2%). A total of 47 pregnant women carried the same species vaginally and rectally. This resulted in 50 vaginal/rectal pairs of the same species, for a total of eight different species. For 34 of the 50 species pairs (68%), isolates with the same genotype were present vaginally and rectally and a high level of genotypic diversity within species per subject was also established. Conclusion: It can be concluded that there is a certain degree of correspondence between the vaginal and rectal microflora, not only with regard to species composition but also with regard to strain identity between vaginal and rectal isolates. These results support the hypothesis that the rectal microflora serves as a reservoir for colonisation of the vaginal econiche