Comparative Study of Superabsorbent Polymers and Pre‐soaked Pumice as Internal Curing Agents in Rice Husk Ash Based High‐Performance Concrete

Utilisation of superabsorbent polymers (SAP) and pre‐soaked lightweight aggregates (LWA) as internal curing (IC) agents for the mitigation of autogenous shrinkage and micro‐cracking of high strength/highperformance concrete (HSC/HPC) have been well researched and documented in literature. Rice husk ash (RHA) on the other hand has been adjudged to be of good pozzolanic activity and a possible alternative to silica fume (SF) in low water/binder (W/B) concrete production. An experimental comparative study was conducted in the current work to assess the effectiveness of the two known ICagents on rice husk ash (RHA) based HPC. HPC mixtures of fc,cube28=60 MPa minimum target strength produced and internally cured with 0.3% content of SAP by weight of binder (bwob) and varied content of pre‐soaked pumice (5 to 10% in steps of 2.5%) by weight of coarse aggregate (bwocg) were cast using 100 mm cubes samples. Thereafter, the samples were cured for 7, 14, 28 and 56 days by water immersion before subjecting them to compressive strength test. The results showed 0.2% bwob SAP HPC (SHPC1) to be the best performed internally cured HPC at the early ages with similar long‐term strength values as 5 and 7.5% bwocg saturated pumiced HPC (PHPC1&2). The study thereby recommends SAP content of 0.2% bwob and saturated pumice content up to 7.5% bwocg for use as ICagent in HPC

Viabilidade do emprego de cinza de casca de arroz natural em concreto estrutural. Parte I: propriedades mecânicas e microestrutura

A casca de arroz, para ser utilizada em concreto estrutural, necessita de queima com temperatura controlada e de moagem prévia para lhe conferir maior reatividade pozolânica. Este trabalho discute o emprego da cinza de casca de arroz (CCA) natural e residual, queimada sem controle de temperatura e sem moagem, de forma a simplificar o processamento da CCA e ampliar seu uso em concretos convencionais, em locais próximos onde é produzido, Estudou-se a sequência de colocação e o tempo de mistura dos materiais na betoneira, para obtenção do melhor desempenho da automoagem no tambor. Foram testadas misturas de concreto de referência com cimento Portland e com 15% e 25% de substituição de cimento, em massa, por CCA natural e moída. Foram realizados ensaios de resistência à compressão axial, tração por compressão diametral, módulo de elasticidade, retração total, porosimetria por intrusão de mercúrio, água quimicamente combinada e MEV. A análise dos resultados revela a viabilidade da substituição de 15% de cimento por CCA natural, com perda não significativa de resistência à tração e módulo de elasticidade a 28 dias, com recuperação total a 91 dias, para concretos com resistências à compressão entre 25 MPa e 40 MPa

Optically tuned terahertz modulator based on annealed multilayer MoS2

Controlling the propagation properties of terahertz waves is very important in terahertz technologies applied in high-speed communication. Therefore a new-type optically tuned terahertz modulator based on multilayer-MoS 2 and silicon is experimentally demonstrated. The terahertz transmission could be significantly modulated by changing the power of the pumping laser. With an annealing treatment as a p-doping method, MoS 2 on silicon demonstrates a triple enhancement of terahertz modulation depth compared with the bare silicon. This MoS 2 -based device even exhibited much higher modulation efficiency than the graphene-based device. We also analyzed the mechanism of the modulation enhancement originated from annealed MoS 2, and found that it is different from that of graphene-based device. The unique optical modulating properties of the device exhibit tremendous promise for applications in terahertz switch

Abrasion resistance and compressive strength of unprocessed rice husk ash concrete

This paper investigates the effects of adding natural rice husk ash collected from uncontrolled burning and without previous grinding (NRHA) as cement replacement in concrete. To obtain an adequate particle size, NRHA was mixed with coarse aggregate for a convenient period of time before adding the other components. Compressive strength, water absorption, porosity, and abrasion resistance expressed as weight loss were examined. Test results show that decreasing the particle size through mixing with coarse aggregate improved the compressive strength, reduced the permeability, and increased the abrasion resistance of concrete. By mixing NRHA with aggregate for 8 min, abrasion resistance improved by 10.35 and 23.62% over the control concrete at 28 and 91 days, respectively. Incorporating NRHA in concrete by grinding with coarse aggregate during the mixing process could be suitable for making normal-strength concrete and for applications where abrasion resistance is an important parameter. In addition, using NRHA as a partial replacement cement contributes to the reduction of CO2 emissions due to the production of cement

Planar integrated metasurfaces for highly-collimated terahertz quantum cascade lasers

We report planar integration of tapered terahertz (THz) frequency quantum cascade lasers (QCLs) with metasurface waveguides that are designed to be spoof surface plasmon (SSP) out-couplers by introducing periodically arranged SSP scatterers. The resulting surface-emitting THz beam profile is highly collimated with a divergence as narrow as ~4° × 10°, which indicates a good waveguiding property of the metasurface waveguide. In addition, the low background THz power implies a high coupling efficiency for the THz radiation from the laser cavity to the metasurface structure. Furthermore, since all the structures are in-plane, this scheme provides a promising platform where well-established surface plasmon/metasurface techniques can be employed to engineer the emitted beam of THz QCLs controllably and flexibly. More importantly, an integrated active THz photonic circuit for sensing and communication applications could be constructed by incorporating other optoelectronic devices such as Schottky diode THz mixers, and graphene modulators and photodetectors