The effect of baffles on tank sloshing, part i

Testing of cantilevered flexible, hinged, and slamming baffles by subjection to sinusoidal variation in water far from free surface - effect on tank sloshin

Optical monitoring of gamma-ray source fields

The three gamma-ray burst source fields GBS1028+46, GBS1205+24, and GBS2252-03 have been monitored for transient optical emission for a combined total of 52 hours. No optical events were seen. The limiting magnitude for the search was M sub V = 15.8 longer and M sub V = 17.0 for 6.0 s or longer

Operational modules for space station construction

Identification of an effective space construction concept is a current objective of NASA studies. One concept, described in this memorandum, consists of repetitive use of operational modules, which minimizes on-orbit stay time for the shuttle. A space station constructed of operational modules may benefit from fabrication and system checkout in ground-based facilities, and since the modules are the primary structure of the space station, a minimum of additional structure, and trips and on-orbit stay time of the shuttle are required

The motivating operation and negatively reinforced problem behavior. A systematic review.

The concept of motivational operations exerts an increasing influence on the understanding and assessment of problem behavior in people with intellectual and developmental disability. In this systematic review of 59 methodologically robust studies of the influence of motivational operations in negative reinforcement paradigms in this population, we identify themes related to situational and biological variables that have implications for assessment, intervention, and further research. There is now good evidence that motivational operations of differing origins influence negatively reinforced problem behavior, and that these might be subject to manipulation to facilitate favorable outcomes. There is also good evidence that some biological variables warrant consideration in assessment procedures as they predispose the person's behavior to be influenced by specific motivational operations. The implications for assessment and intervention are made explicit with reference to variables that are open to manipulation or that require further research and conceptualization within causal models

Euler angles for G2

We provide a simple parametrization for the group G2, which is analogous to the Euler parametrization for SU(2). We show how to obtain the general element of the group in a form emphasizing the structure of the fibration of G2 with fiber SO(4) and base H, the variety of quaternionic subalgebras of octonions. In particular this allows us to obtain a simple expression for the Haar measure on G2. Moreover, as a by-product it yields a concrete realization and an Einstein metric for H.Comment: 21 pages, 2 figures, some misprints correcte

Chrysanthemum species used as food and medicine: Understanding quality differences on the global market

Background Chrysanthemum flowers [Ch. x morifolium (Ramat.) Hemsl. and Ch. indicum L.] are a globally used and pharmacologically interesting botanical drug, however, with variable product quality. Objective We aim at understanding the chemical variability of primary material available commercially based on different origins and associated quality problems like contamination with heavy metals. This needs to be assessed in the context of the current regulations for this botanical drug and associated problems. Material and Methods 15 C. indicum L. and 50 C. x morifolium (Ramat.) Hemsl., including a range of geographical cultivars recognized in China, samples from the USA, Europe and China were analyzed using High Performance Thin Layer Chromatography (HPTLC) to compare their general chemical profile. Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) was used to quantify heavy metal contamination. Results The: HPTLC fingerprints of C. indicum samples are clearly distinguishable from C. x morifolium. Fingerprints of samples from the same cultivars collected from markets in different countries (USA and China) show different patterns. Large variance of fingerprints within each cultivar group was observed. The heavy metal analysis showed excessive amounts of some harmful heavy metal in some commercial products with excessive cadmium being the most frequent problem. Conclusions The Chinese medicinal cultivars vary. Differences between samples sourced from the USA and China might be ascribable to geographical factors (e.g. soil composition), degradation during transport/storage or adulteration, but geographical differences should also be taken into account. Importantly, a much more detailed definition of the drug are needed for better quality control. In addition, with continuous contamination problem observed, a more widespread regulation is an essential requirement for better quality

Intermittency and structure functions in channel flow turbulence

We present a study of intermittency in a turbulent channel flow. Scaling exponents of longitudinal streamwise structure functions, $\zeta_p /\zeta_3$, are used as quantitative indicators of intermittency. We find that, near the center of the channel the values of $\zeta_p /\zeta_3$ up to $p=7$ are consistent with the assumption of homogeneous/isotropic turbulence. Moving towards the boundaries, we observe a growth of intermittency which appears to be related to an intensified presence of ordered vortical structures. In fact, the behaviour along the normal-to-wall direction of suitably normalized scaling exponents shows a remarkable correlation with the local strength of the Reynolds stress and with the \rms value of helicity density fluctuations. We argue that the clear transition in the nature of intermittency appearing in the region close to the wall, is related to a new length scale which becomes the relevant one for scaling in high shear flows.Comment: 4 pages, 6 eps figure

Transpiration-Cooled Spacecraft-Insulation-Repair Fasteners

Transpiration-cooled fasteners are proposed that operate like an open-loop heat pipe (self-tapping screws, bolts, and spikes) for use in on-orbit repair of thermal- insulation of a space shuttle or other spacecraft. By limiting the temperature rise of such a fastener and of the adjacent repair material and thermal protection system, the transpiration cooling would contribute to the ability of the repair to retain its strength and integrity in the high-heat-flux, oxidizing environment of reentry into the atmosphere of the Earth. A typical fastener according to the proposal would include a hollow refractory-metal, refractory-composite, or ceramic screw or bolt, the central cavity of which would be occupied by a porous refractory- metal or ceramic plug that would act as both a reservoir and a wick for a transpirant liquid. The plug dimensions, the plug material, and the sizes of the pores would be chosen in conjunction with the transpirant liquid so that (1) capillary pumping could be relied upon to transport the liquid to the heated surface, where the liquid would be vaporized, and (2) the amount of liquid would suffice for protecting against the anticipated heat flux and integrated heat load

Shoaling of nonlinear internal waves in Massachusetts Bay

Author Posting. © American Geophysical Union, 2008. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research 113 (2008): C08031, doi:10.1029/2008JC004726.The shoaling of the nonlinear internal tide in Massachusetts Bay is studied with a fully nonlinear and nonhydrostatic model. The results are compared with current and temperature observations obtained during the August 1998 Massachusetts Bay Internal Wave Experiment and observations from a shorter experiment which took place in September 2001. The model shows how the approaching nonlinear undular bore interacts strongly with a shoaling bottom, offshore of where KdV theory predicts polarity switching should occur. It is shown that the shoaling process is dominated by nonlinearity, and the model results are interpreted with the aid of a two-layer nonlinear but hydrostatic model. After interacting with the shoaling bottom, the undular bore emerges on the shallow shelf inshore of the 30-m isobath as a nonlinear internal tide with a range of possible shapes, all of which are found in the available observational record.A. Scotti began this project as a Postdoctoral Scholar at the Woods Hole Oceanographic Institution, with support from the Johnson Foundation and the USGS. Further support was provided to Scotti by the Office of Naval Research under grants N00014-01-1-0172, N00014-03-1-0553, and N00014-05-1-0361, and by NSF under grant OCE 07-29636. R. Beardsley was supported by ONR under grants N00014-98-1- 0059, N00014-00-1-0210, and the Smith Chair in Coastal Physical Oceanography. J. Pineda was supported by ONR under grants N00014-01-1-0172, and by a WHOIOcean Life Institute Fellowship

Mobile communication base station antenna measurement using unmanned aerial vehicle

Traditional base station antenna measurement methods conducted with professional worker climbing towers tend to raise safety and inefficiency concerns in practical application. Designed to address the above problems, this paper proposes an intelligent and fully automatic antenna measurement unmanned aerial vehicle (UAV) system for mobile communication base station. Firstly, an antenna database, containing 19,715 images, named UAV-Antenna is constructed by image capturing with the help of UAVs flying around various base stations. Secondly, Mask R-CNN is adopted to train an optimal instance segmentation model on UAV-Antenna. Then, pixel coordinates and threshold are utilized for measuring antenna quantity and separate all antenna data for further measuring. Finally, a least squares method is employed for measuring antenna parameters. Experimental results show that the proposed method can not only satisfy the industry application standards, but also guarantee safety of labors and efficiency of performance