2,554 research outputs found
Electrical termination techniques
A technical review of high reliability electrical terminations for electronic equipment was made. Seven techniques were selected from this review for further investigation, experimental work, and preliminary testing. From the preliminary test results, four techniques were selected for final testing and evaluation. These four were: (1) induction soldering, (2) wire wrap, (3) percussive arc welding, and (4) resistance welding. Of these four, induction soldering was selected as the best technique in terms of minimizing operator errors, controlling temperature and time, minimizing joint contamination, and ultimately producing a reliable, uniform, and reusable electrical termination
Mood Management Intervention for College Smokers with Elevated Depressive Symptoms: A Pilot Study
Objective
This pilot study examined smoking reduction and cessation among college smokers with elevated depressive symptomatology participating in a group-based behavioral counseling, mood management, and motivational enhancement combined intervention (CBT).
Participants & Methods
Fifty-eight smokers (smoked ≥ 6 days in the past 30) were randomized to six sessions of CBT (n=29) or a nutrition-focused attention-matched control group (CG, n=29).
Results
Relative to CG participants, significantly more CBT participants reduced smoking intensity by 50% (χ2(1, N=58)=4.86, p=.028) at end of treatment. Although CBT participants maintained smoking reductions at 3- and 6-month follow-up, group differences were no longer significant. No group differences in cessation emerged. Finally, participants in both groups evidenced increased motivation to reduce smoking at end of treatment (F(1, 44)=11.717, p=.001, ηp2=.207).
Conclusions
Findings demonstrate the utility of this intervention for smoking reduction and maintenance of reductions over time among a population of college students with elevated depressive symptomatology
Control of defect-mediated tunneling barrier heights in ultrathin MgO films
The impact of oxygen vacancies on local tunneling properties across
rf-sputtered MgO thin films was investigated by optical absorption spectroscopy
and conducting atomic force microscopy. Adding O to the Ar plasma during
MgO growth alters the oxygen defect populations, leading to improved local
tunneling characteristics such as a lower density of current hotspots and a
lower tunnel current amplitude. We discuss a defect-based potential landscape
across ultrathin MgO barriers.Comment: 4 pages, 4 figure
Detection of CN gas in Interstellar Object 2I/Borisov
The detection of Interstellar Objects passing through the Solar System offers
the promise of constraining the physical and chemical processes involved in
planetary formation in other extrasolar systems. While the effect of outgassing
by 1I/2017 U1 ('Oumuamua) was dynamically observed, no direct detection of the
ejected material was made. The discovery of the active interstellar comet
2I/Borisov means spectroscopic investigations of the sublimated ices is
possible for this object. We report the first detection of gas emitted by an
interstellar comet via the near-UV emission of CN from 2I/Borisov at a
heliocentric distance of = 2.7 au on 2019 September 20. The production rate
was found to be Q(CN) = s, using a simple
Haser model with an outflow velocity of 0.5 km s. No other emission was
detected, with an upper limit to the production rate of C of
s. The spectral reflectance slope of the dust coma over
\AA\ \AA \ is steeper than at longer wavelengths, as
found for other comets. Broad band photometry on 2019 September 19 gave a
dust production rate of cm. Modelling of the observed gas and
dust production rates constrains the nuclear radius to km assuming
reasonable nuclear properties. Overall, we find the gas, dust and nuclear
properties for the first active Interstellar Object are similar to normal Solar
System comets.Comment: 9 pages, 4 figures, accepted for publication in ApJ
A thin layer angiogenesis assay: a modified basement matrix assay for assessment of endothelial cell differentiation
BACKGROUND: Basement matrices such as Matrigel™ and Geltrex™ are used in a variety of cell culture assays of anchorage-dependent differentiation including endothelial cell tube formation assays. The volumes of matrix recommended for these assays (approximately 150 μl/cm(2)) are costly, limit working distances for microscopy, and require cell detachment for subsequent molecular analysis. Here we describe the development and validation of a thin-layer angiogenesis (TLA) assay for assessing the angiogenic potential of endothelial cells that overcomes these limitations. RESULTS: Geltrex™ basement matrix at 5 μl/cm(2) in 24-well (10 μl) or 96-well (2 μl) plates supports endothelial cell differentiation into tube-like structures in a comparable manner to the standard larger volumes of matrix. Since working distances are reduced, high-resolution single cell microscopy, including DIC and confocal imaging, can be used readily. Using MitoTracker dye we now demonstrate, for the first time, live mitochondrial dynamics and visualise the 3-dimensional network of mitochondria present in differentiated endothelial cells. Using a standard commercial total RNA extraction kit (Qiagen) we also show direct RNA extraction and RT-qPCR from differentiated endothelial cells without the need to initially detach cells from their supporting matrix. CONCLUSIONS: We present here a new thin-layer assay (TLA) for measuring the anchorage-dependent differentiation of endothelial cells into tube-like structures which retains all the characteristics of the traditional approach but with the added benefit of a greatly lowered cost and better compatibility with other techniques, including RT-qPCR and high-resolution microscopy. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s12860-014-0041-5) contains supplementary material, which is available to authorized users
Models of the SL9 Impacts II. Radiative-hydrodynamic Modeling of the Plume Splashback
We model the plume "splashback" phase of the SL9 collisions with Jupiter
using the ZEUS-3D hydrodynamic code. We modified the Zeus code to include gray
radiative transport, and we present validation tests. We couple the infalling
mass and momentum fluxes of SL9 plume material (from paper I) to a jovian
atmospheric model. A strong and complex shock structure results. The modeled
shock temperatures agree well with observations, and the structure and
evolution of the modeled shocks account for the appearance of high excitation
molecular line emission after the peak of the continuum light curve. The
splashback region cools by radial expansion as well as by radiation. The
morphology of our synthetic continuum light curves agree with observations over
a broad wavelength range (0.9 to 12 microns). A feature of our ballistic plume
is a shell of mass at the highest velocities, which we term the "vanguard".
Portions of the vanguard ejected on shallow trajectories produce a lateral
shock front, whose initial expansion accounts for the "third precursors" seen
in the 2-micron light curves of the larger impacts, and for hot methane
emission at early times. Continued propagation of this lateral shock
approximately reproduces the radii, propagation speed, and centroid positions
of the large rings observed at 3-4 microns by McGregor et al. The portion of
the vanguard ejected closer to the vertical falls back with high z-component
velocities just after maximum light, producing CO emission and the "flare" seen
at 0.9 microns. The model also produces secondary maxima ("bounces") whose
amplitudes and periods are in agreement with observations.Comment: 13 pages, 9 figures (figs 3 and 4 in color), accepted for Ap.J.
latex, version including full figures at:
http://oobleck.tn.cornell.edu/jh/ast/papers/slplume2-20.ps.g
Small-Scale Communities Are Sufficient for Cost- and Data-Efficient Peer-to-Peer Energy Sharing
Due to ever lower cost, investments in renewable electricity generation and storage have become more attractive to electricity consumers in recent years. At the same time, electricity generation and storage have become something to share or trade locally in energy communities or microgrid systems. In this context, peer-to-peer (P2P) sharing has gained attention, since it offers a way to optimize the cost-benefits from distributed resources, making them financially more attractive. However, it is not yet clear in which situations consumers do have interests to team up and how much cost is saved through cooperation in practical instances. While introducing realistic continuous decisions, through detailed analysis based on large-scale measured household data, we show that the financial benefit of cooperation does not require an accurate forecasting. Furthermore, we provide strong evidence, based on analysis of the same data, that even P2P networks with only 2--5 participants can reach a high fraction (96% in our study) of the potential gain, i.e., of the ideal offline (i.e., non-continuous) achievable gain. Maintaining such small communities results in much lower associated costs and better privacy, as each participant only needs to share its data with 1--4 other peers. These findings shed new light and motivate requirements for distributed, continuous and dynamic P2P matching algorithms for energy trading and sharing
Indicators for wild animal offtake: methods and case study for African mammals and birds
Unsustainable exploitation of wild animals is one of the greatest threats to biodiversity and to millions of people depending on wild meat for food and income. The international conservation and development community has committed to implementing plans for sustainable use of natural resources and has requested development of monitoring systems of bushmeat offtake and trade. Although offtake monitoring systems and indicators for marine species are more developed, information on harvesting terrestrial species is limited. Building on approaches developed to monitor exploitation of fisheries and population trends, we have proposed two novel indicators for harvested terrestrial species: the mean body mass indicator (MBMI) assessing whether hunters are relying increasingly on smaller species over time, as a measure of defaunation, by tracking body mass composition of harvested species within samples across various sites and dates; and the offtake pressure indicator (OPI) as a measure of harvesting pressure on groups of wild animals within a region by combining multiple time series of the number of harvested individuals across species. We applied these two indicators to recently compiled data for West and Central African mammals and birds. Our exploratory analyses show that the MBMI of harvested mammals decreased but that of birds rose between 1966/1975 and 2010. For both mammals and birds the OPI increased substantially during the observed time period. Given our results, time-series data and information collated from multiple sources are useful to investigate trends in body mass of hunted species and offtake volumes. In the absence of comprehensive monitoring systems, we suggest that the two indicators developed in our study are adequate proxies of wildlife offtake, which together with additional data can inform conservation policies and actions at regional and global scales
The relationship between perceived training and development and employee retention:the mediating role of work attitudes
This paper considers how utilizing a model of job-related affect can be used to explain the processes through which perceived training and development influence employee retention. We applied Russell’s model of core affect to categorize four different forms of work attitude, and positioned these as mediators of the relationship between perceived training and development and intention to stay. Using data from 1,191 employees across seven organizations, multilevel analyses found that job satisfaction, employee engagement, and change-related anxiety were significantly associated with intention to stay, and fully mediated the relationship between perceived training and development and intention to stay. Contrary to our hypotheses, emotional exhaustion was not significantly associated with intention to stay nor acted as a mediator when the other attitudes were included. These findings show the usefulness of Russell’s model of core affect in explaining the link between training and development and employee retention. Moreover, the findings collectively suggest that studies examining employee retention should include a wider range of work attitudes that highlight pleasant forms of affect
- …