Analysis of the structure, configuration, and sizing of Cu and Cu oxide nanoparticles generated by fs laser ablation of solid target in liquids

We report on the analysis of structure, configuration, and sizing of Cu and Cu oxide nanoparticles (Nps) produced by femtosecond (fs) laser ablation of solid copper target in liquids. Laser pulse energy ranged between 500 µJ and 50 µJ. Water and acetone were used to produce the colloidal suspensions. The study was performed through optical extinction spectroscopy using Mie theory to fit the full experimental spectra, considering free and bound electrons size dependent contributions to the metal dielectric function. Raman spectroscopy and AFM technique were also used to characterize the sample. Considering the possible oxidation of copper during the fabrication process, two species (Cu and Cu2O) arranged in two structures (bare core or core-shell) and in two configuration types (Cu-Cu2O or Cu2O-Cu) were considered for the fitting depending on the laser pulse energy and the surrounding media. For water at high energy, it can be observed that a Cu-Cu2O configuration fits the experimental spectra of the colloidal suspension, while for decreasingenergy and below a certain threshold, a Cu2O-Cu configuration needs to be included for theoptimum fit. Both species coexist for energies below 170 µJ for water. On the other hand, for acetone at high energy, optimum fit of the full spectrum suggests the presence a bimodal Cu-Cu2O core-shell Nps distribution while for decreasing energy and below a 70 µJ threshold energy value, Cu2O-Cu core-shell Nps must be included, together with the former configuration, for the fit of the full spectrum. We discuss possible reasons for the changes in the structural configuration of the core-shell Nps.Fil: Schinca, Daniel Carlos. Universidad Nacional de la Plata. Facultad de Cs.exactas. Instituto de Fisica de la Plata; ArgentinaFil: Videla, Fabian Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Centro de Investigaciones Opticas (i); ArgentinaFil: Fernández van Raap, Marcela Beatriz. Universidad Nacional de la Plata. Facultad de Ingenieria; ArgentinaFil: Scaffardi, Lucia Beatriz. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Centro de Investigaciones Opticas (i); ArgentinaFil: Santillán, Jesica María José. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Centro de Investigaciones Opticas (i); Argentin

Control of the diffracted response of a metallic Wire Array with Double Period: Experimental Demonstration

In recent papers, it has been theoretically shown that by using dual-period wire gratings, it is possible to control the relative efficiencies of the diffracted orders, regardless of the wires’ material, incident polarization and wavelength. In this Letter, we experimentally demonstrate, for the first time, that by appropriately choosing the geometrical parameters of a nanometric periodic structure, it is possible to control the optical response in the visible range. We show examples of nanostructures designed to cancel out or to intensify a particular diffraction order. Such nanostructures allow a broad control over the directionality and the intensity of the diffracted light, which makes them useful for applications such as highly directional optical nanoantennas and photonic multiplexers

Spectroscopic ellipsometry and polarimetry for materials and systems analysis at the nanometer scale: state-of-the-art, potential, and perspectives

This paper discusses the fundamentals, applications, potential, limitations, and future perspectives of polarized light reflection techniques for the characterization of materials and related systems and devices at the nanoscale. These techniques include spectroscopic ellipsometry, polarimetry, and reflectance anisotropy. We give an overview of the various ellipsometry strategies for the measurement and analysis of nanometric films, metal nanoparticles and nanowires, semiconductor nanocrystals, and submicron periodic structures. We show that ellipsometry is capable of more than the determination of thickness and optical properties, and it can be exploited to gain information about process control, geometry factors, anisotropy, defects, and quantum confinement effects of nanostructures

Mesoporous silica nanoparticles with tunable pore size for tailored gold nanoparticles

The aim of this paper was to verify a possible correlation between the pore-size of meso- porous silica nanoparticles (MSNs) and the sizes of gold nanoparticles (AuNPs) obtained by an impreg- nation of gold(III) chloride hydrate solution in the MSNs, followed by a specific thermal treatment. Mesoporous silica nanoparticles with tunable pore diameter were synthesized via a surfactant-assisted method. Tetraethoxysilane as silica precursor, cetyl- trimethylammonium bromide (CTAB) as surfactant and toluene as swelling agent were used. By varying the CTAB–toluene molar ratio, the average dimension of the pores could be tuned from 2.8 to 5.5 nm. Successively, thiol groups were grafted on the surface of the MSNs. Finally, the thermal evolution of the gold salt, followed by ‘‘in situ’’ X-ray powder diffraction (XRPD) and thermogravimetric analysis (TGA), revealed an evident correlation among the degradation of the thiol groups, the pore dimension of the MSNs and the size of the AuNPs. The samples were characterized by means of nitrogen adsorption– desorption, transmission electron microscopy, small- angle X-ray scattering, XRPD ‘‘in situ’’ by synchro- tron radiation, and ‘‘ex situ’’ by conventional tech- niques, diffuse reflectance infrared Fourier transform spectroscopy, and TGA

Effects of interband transitions on Faraday rotation in metallic nanoparticles

The Faraday rotation in metallic nanoparticles is considered based on a quantum model for the dielectric function epsilon(ω) in the presence of a DC magnetic field B. We focus on effects in epsilon(ω) due to interband transitions (IBTs), which are important in the blue and ultraviolet for noble metals used in plasmonics. The dielectric function is found using the perturbation of the electron density matrix due to the optical field of the incident electromagnetic radiation. The calculation is applied to transitions between two bands (d and p, for example) separated by a gap, as one finds in gold at the L-point of the Fermi surface. The result of the DC magnetic field is a shift in the effective optical frequency causing IBTs by ±μ[subscript B]B/ħ, where opposite signs are associated with left/right circular polarizations. The Faraday rotation for a dilute solution of 17 nm diameter gold nanoparticles is measured and compared with both the IBT theory and a simpler Drude model for the bound electron response. Effects of the plasmon resonance mode on Faraday rotation in nanoparticles are also discussed

Structure, configuration and sizing of Ni nanoparticles generated by ultrafast laser ablation in different media

In recent years, nickel nanoparticles (NPs) have increased scientific interest because of their extensive prospects in catalysts, information storage, large-scale batteries and biomedicine. Several works on Ni NPs generation by laser ablation have appeared in the literature in the last years, using different pulsed laser regimes and different media have been published recently. In this work we analyze the characteristics of species, structure (bare core or core-shell), configuration and size distribution of NPs generated by fs pulse laser ablation over a Ni solid target in n-heptane and water. We explore the presence of NiO-Ni core-shell and hollow Ni (or air-Ni) NPs in the colloids obtained. These were experimentally characterized using AFM and TEM microscopy, as well as Optical Extinction Spectroscopy (OES). Extinction spectra were modeled using Mie theory through an appropriate modification of the complex experimental dielectric function, taking into account a size-dependent corrective term for each free and bound electron contribution. Experimental UV-visible-NIR spectra were reproduced considering a size distribution of bare core, hollow and core-shell structures NPs. In both media, Ni NPs shape and size distribution agrees with that derived from TEM and AFM analysis954