84 research outputs found

    Electrochromic Polymer Ink Derived from a Sidechain-Modified EDOT for Electrochromic Devices with Colorless Bright State

    Get PDF
    AbstractPrintable organic electrochromic materials are the key component of flexible low power and low weight displays and dynamic shading systems. A vast number of more or less well‐performing materials is reported in the literature, but only a very limited number of them have been tested in an industrially‐relevant environment so far. Upscaling requires simplicity of synthesis, overall sustainability, low cost and compatibility with simple and high throughput wet‐chemical deposition techniques, such as slot‐die coating or inkjet printing. In the present paper, an original process is described that enables the controlled oxidative polymerization of a water insoluble, functionalized 3,4‐ethylene dioxythiophene (EDOT) derivative. This process leads to the formation of an ink that consists solely of active polymeric material (no dispersing agents) and has suitable rheological properties for use in roll‐to‐roll slot‐die coating or ink‐jet printing. The straightforward deposition, followed by a simple thermal treatment, directly yields stable and homogeneous thin films with state‐of‐the‐art electrochromic performance

    An Integrated Theoretical/Experimental Study of Quinolinic-Isoquinolinic Derivatives Acting as Reversible Electrochromes

    Get PDF
    A series of compounds, featuring an ethenylic bridge and quinoline and isoquinoline end capping units possessing systematically varied substitution patterns, were prepared as molecular materials for electrochromic applications. The different structures were optimized in order to maximize the electrochromic contrast in the visible region, mostly by achieving a completely UV-absorbing oxidized state. Density functional theory (DFT) calculations are exploited in order to rationalize the correlation between the molecular structure, the functional groups' electronic properties, and the electrochemical behavior. It is shown that the molecular planarity (i.e. ring/ring pi conjugation) plays a major role in defining the mechanism of the electrochemical charge transfer reaction, while the substituent's nature has an influence on the LUMO energy. Among the compounds here studied, the (E)-10-methyl-9-(2-(2-methylisoquinolinium1- yl)-vinyl)-1,2,3,4-tetrahydroacri-dinium trifluoromethanesulfonate derivative shows the most interesting properties as an electrochromophore

    New Roll‐to‐Roll Processable PEDOT‐Based Polymer with Colorless Bleached State for Flexible Electrochromic Devices

    Get PDF
    Conjugated electrochromic (EC) polymers for flexible EC devices (ECDs) generally lack a fully colorless bleached state. A strategy to overcome this drawback is the implementation of a new sidechain-modified poly(3,4-ethylene dioxythiophene) derivative that can be deposited in thin-film form in a customized high-throughput and large-area roll-to-roll polymerization process. The sidechain modification provides enhanced EC properties in terms of visible light transmittance change, Δτv = 59% (ΔL* = 54.1), contrast ratio (CR = 15.8), coloration efficiency (η = 530 cmÂČ C−1), and color neutrality (L* = 83.8, a* = −4.3, b* = −4.1) in the bleached state. The intense blue-colored polymer thin films exhibit high cycle stability (10 000 cycles) and fast response times. The design, synthesis, and polymerization of the modified 3,4-ethylene dioxythiophene derivative are discussed along with a detailed optical, electrochemical, and spectroelectrochemical characterization of the resulting EC thin films. Finally, a flexible see-through ECD with a visible light transmittance change of Δτv = 47% (ΔL* = 51.9) and a neutral-colored bleached state is developed

    Chitosan gated organic transistors printed on ethyl cellulose as a versatile platform for edible electronics and bioelectronics

    Get PDF
    Edible electronics is an emerging research field targeting electronic devices that can be safely ingested and directly digested or metabolized by the human body. As such, it paves the way to a whole new family of applications, ranging from ingestible medical devices and biosensors, to smart labelling for food quality monitoring and anti-counterfeiting. Being a newborn research field, many challenges need to be addressed to realize fully edible electronic components. In particular, an extended library of edible electronic materials is required, with suitable electronic properties depending on the target device and compatible with large-area printing processes, to allow scalable and cost-effective manufacturing. In this work, we propose a platform for future low-voltage edible transistors and circuits that comprises an edible chitosan gating medium and inkjet printed inert gold electrodes, compatible with low thermal budget edible substrates, such as ethylcellulose. We report the compatibility of the platform, characterized by critical channel features as low as 10 ”m, with different inkjet printed carbon-based semiconductors, including biocompatible polymers present in the picograms range per device. A complementary organic inverter is also demonstrated with the same platform as a proof-of-principle logic gate. The presented results offer a promising approach to future low-voltage edible active circuitry, as well as a testbed for non-toxic printable semiconductors

    Chromosomal Evolution and Evolutionary Relationships of Lebiasina Species (Characiformes, Lebiasinidae)

    Get PDF
    We present the first cytogenetic data for Lebiasina bimaculata and L. melanoguttata with the aim of (1) investigating evolutionary events within Lebiasina and their relationships with other Lebiasinidae genera and (2) checking the evolutionary relationships between Lebiasinidae and Ctenoluciidae. Both species have a diploid number 2n = 36 with similar karyotypes and microsatellite distribution patterns but present contrasting C-positive heterochromatin and CMA3 + banding patterns. The remarkable interstitial series of C-positive heterochromatin occurring in L. melanoguttata is absent in L. bimaculata. Accordingly, L. bimaculata shows the ribosomal DNA sites as the only GC-rich (CMA3 +) regions, while L. melanoguttata shows evidence of a clear intercalated CMA3 + banding pattern. In addition, the multiple 5S and 18S rDNA sites in L. melanogutatta contrast with single sites present in L. bimaculata. Comparative genomic hybridization (CGH) experiments also revealed a high level of genomic differentiation between both species. A polymorphic state of a conspicuous C-positive, CMA3 +, and (CGG)n band was found only to occur in L. bimaculata females, and its possible relationship with a nascent sex chromosome system is discussed. Whole chromosome painting (WCP) and CGH experiments indicate that the Lebiasina species examined and Boulengerella maculata share similar chromosomal sequences, thus supporting the relatedness between them and the evolutionary relationships between the Lebiasinidae and Ctenoluciidae families

    Identification of bi-allelic LFNG variants in three patients and further clinical and molecular refinement of spondylocostal dysostosis 3

    Get PDF
    : Spondylocostal dysostosis (SCD), a condition characterized by multiple segmentation defects of the vertebrae and rib malformations, is caused by bi-allelic variants in one of the genes involved in the Notch signaling pathway that tunes the "segmentation clock" of somitogenesis: DLL3, HES7, LFNG, MESP2, RIPPLY2, and TBX6. To date, seven individuals with LFNG variants have been reported in the literature. In this study we describe two newborns and one fetus with SCD, who were found by trio-based exome sequencing (trio-ES) to carry homozygous (c.822-5C>T) or compound heterozygous (c.[863dup];[1063G>A]) and (c.[521G>T];[890T>G]) variants in LFNG. Notably, the c.822-5C>T change, affecting the polypyrimidine tract of intron 5, is the first non-coding variant reported in LFNG. This study further refines the clinical and molecular features of spondylocostal dysostosis 3 and adds to the numerous investigations supporting the usefulness of trio-ES approach in prenatal and neonatal settings

    An Insight into the Chromosomal Evolution of Lebiasinidae (Teleostei, Characiformes)

    Get PDF
    Lebiasinidae fishes have been historically neglected by cytogenetical studies. Here we present a genomic comparison in eleven Lebiasinidae species, in addition to a review of the ribosomal DNA sequences distribution in this family. With that, we develop ten sets of experiments in order to hybridize the genomic DNA of representative species from the genus Copeina, Copella, Nannostomus, and Pyrrhulina in metaphase plates of Lebiasina melanoguttata. Two major pathways on the chromosomal evolution of these species can be recognized: (i) conservation of 2n = 36 bi-armed chromosomes in Lebiasininae, as a basal condition, and (ii) high numeric and structural chromosomal rearrangements in Pyrrhulininae, with a notable tendency towards acrocentrization. The ribosomal DNA (rDNA) distribution also revealed a marked differentiation during the chromosomal evolution of Lebiasinidae, since both single and multiple sites, in addition to a wide range of chromosomal locations can be found. With some few exceptions, the terminal position of 18S rDNA appears as a common feature in Lebiasinidae-analyzed species. Altogether with Ctenoluciidae, this pattern can be considered a symplesiomorphism for both families. In addition to the specific repetitive DNA content that characterizes the genome of each particular species, Lebiasina also keeps inter-specific repetitive sequences, thus reinforcing its proposed basal condition in Lebiasinidae

    European Atlas of Natural Radiation

    Get PDF
    Natural ionizing radiation is considered as the largest contributor to the collective effective dose received by the world population. The human population is continuously exposed to ionizing radiation from several natural sources that can be classified into two broad categories: high-energy cosmic rays incident on the Earth’s atmosphere and releasing secondary radiation (cosmic contribution); and radioactive nuclides generated during the formation of the Earth and still present in the Earth’s crust (terrestrial contribution). Terrestrial radioactivity is mostly produced by the uranium and thorium radioactive families together with potassium. In most circumstances, radon, a noble gas produced in the radioactive decay of uranium, is the most important contributor to the total dose. This Atlas aims to present the current state of knowledge of natural radioactivity, by giving general background information, and describing its various sources. This reference material is complemented by a collection of maps of Europe displaying the levels of natural radioactivity caused by different sources. It is a compilation of contributions and reviews received from more than 80 experts in their field: they come from universities, research centres, national and European authorities and international organizations. This Atlas provides reference material and makes harmonized datasets available to the scientific community and national competent authorities. In parallel, this Atlas may serve as a tool for the public to: ‱ familiarize itself with natural radioactivity; ‱ be informed about the levels of natural radioactivity caused by different sources; ‱ have a more balanced view of the annual dose received by the world population, to which natural radioactivity is the largest contributor; ‱ and make direct comparisons between doses from natural sources of ionizing radiation and those from man-made (artificial) ones, hence to better understand the latter.JRC.G.10-Knowledge for Nuclear Security and Safet
    • 

    corecore