950 research outputs found
Giving Intention versus Giving Behavior: How Differently Do Satisfaction, Trust and Commitment Relate to Them?
Energy averages and fluctuations in the decay out of superdeformed bands
We derive analytic formulae for the energy average (including the energy
average of the fluctuation contribution) and variance of the intraband decay
intensity of a superdeformed band. Our results may be expressed in terms of
three dimensionless variables: , ,
and . Here is
the spreading width for the mixing of a superdeformed (SD) state with the
normally deformed (ND) states whose spin is the same as 's. The
have mean level spacing and mean electromagnetic decay width
whilst has electromagnetic decay width .
The average decay intensity may be expressed solely in terms of the variables
and or, analogously to statistical
nuclear reaction theory, in terms of the transmission coefficients and
describing transmission from the to the SD band via and
to lower ND states.
The variance of the decay intensity, in analogy with Ericson's theory of
cross section fluctuations depends on an additional variable, the correlation
length
\Gamma_N/(\Gamma_S+\Gamma^{\downarrow})=\frac{d}{2\pi}T_N/(\Gamma_S+\Gamma^{\d
ownarrow}). This suggests that analysis of an experimentally obtained variance
could yield the mean level spacing as does analysis of the cross section
autocorrelation function in compound nuclear reactions.
We compare our results with those of Gu and Weidenm\"uller.Comment: revtex4, 14 pages, 4 figures, to appear in Physical Review
An evaluation framework for assessing the dependability of Dynamic Binding in Service-Oriented Computing
Service-Oriented Computing (SOC) provides a flexible framework in which applications may be built up from services, often distributed across a network. One of the promises of SOC is that of Dynamic Binding where abstract consumer requests are bound to concrete service instances at runtime, thereby offering a high level of flexibility and adaptability. Existing research has so far focused mostly on the design and implementation of dynamic binding operations and there is little research into a comprehensive evaluation of dynamic binding systems, especially in terms of system failure and dependability. In this paper, we present a novel, extensible evaluation framework that allows for the testing and assessment of a Dynamic Binding System (DBS). Based on a fault model specially built for DBS's, we are able to insert selectively the types of fault that would affect a DBS and observe its behavior. By treating the DBS as a black box and distributing the components of the evaluation framework we are not restricted to the implementing technologies of the DBS, nor do we need to be co-located in the same environment as the DBS under test. We present the results of a series of experiments, with a focus on the interactions between a real-life DBS and the services it employs. The results on the NECTISE Software Demonstrator (NSD) system show that our proposed method and testing framework is able to trigger abnormal behavior of the NSD due to interaction faults and generate important information for improving both dependability and performance of the system under test
Prevalence of Escherichia coli O157:H7 in cow-calf herds in Kansas
Fecal samples from cows and calves and samples of water sources were collected monthly for 8 months from 10 Kansas cow-calf farms to determine the prevalence of E. coli O157:H7. The bacterium was found in 8% of fecal samples from cows that were within 24 hours of calving, 1.4% of fecal samples from cows which were not within 24 hours of calving, 1.4% of calf fecal samples, and 1.5% of water samples. E. coli O157:H7 was identified from at least one sample on all farms
Study protocol: Reporting characteristics of intervention trials of animals published in the Journal of Dairy Science in 2017
Objectives The scope of this cross-sectional observational study is to evaluate prevalence of reporting the 19 objective items of the REFLECT statement checklist (Sargeant et al., 2010), with the primary outcome being prevalence of sample size calculation, in clinical trials published in the Journal of Dairy Science from January to December of 2017. We will also determine risk of bias in individual studies using the Cochrane Risk of Bias 2.0 tools for individually randomized, parallel group trials; cluster randomized, parallel group trials; and individually randomized, cross-over trials (Higgins et al., 2016)
Methods and Processes of Developing the Strengthening the Reporting of Observational Studies in Epidemiology â Veterinary (STROBE-Vet) Statement
BACKGROUND
Reporting of observational studies in veterinary research presents challenges that often are not addressed in published reporting guidelines.
OBJECTIVE
To develop an extension of the STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) statement that addresses unique reporting requirements for observational studies in veterinary medicine related to health, production, welfare, and food safety.
DESIGN
Consensus meeting of experts.
SETTING
Mississauga, Canada.
PARTICIPANTS
Seventeen experts from North America, Europe, and Australia.
METHODS
Experts completed a pre-meeting survey about whether items in the STROBE statement should be modified or added to address unique issues related to observational studies in animal species with health, production, welfare, or food safety outcomes. During the meeting, each STROBE item was discussed to determine whether or not rewording was recommended and whether additions were warranted. Anonymous voting was used to determine consensus.
RESULTS
Six items required no modifications or additions. Modifications or additions were made to the STROBE items 1 (title and abstract), 3 (objectives), 5 (setting), 6 (participants), 7 (variables), 8 (data sources/measurement), 9 (bias), 10 (study size), 12 (statistical methods), 13 (participants), 14 (descriptive data), 15 (outcome data), 16 (main results), 17 (other analyses), 19 (limitations), and 22 (funding).
CONCLUSION
The methods and processes used were similar to those used for other extensions of the STROBE statement. The use of this STROBE statement extension should improve reporting of observational studies in veterinary research by recognizing unique features of observational studies involving food-producing and companion animals, products of animal origin, aquaculture, and wildlife
Observational Study Design in Veterinary Pathology, Part 1: Study Design
Observational studies are the basis for much of our knowledge of veterinary pathology and are highly relevant to the daily practice of pathology. However, recommendations for conducting pathology-based observational studies are not readily available. In part 1 of this series, we offer advice on planning and conducting an observational study with examples from the veterinary pathology literature. Investigators should recognize the importance of creativity, insight, and innovation in devising studies that solve problems and fill important gaps in knowledge. Studies should focus on specific and testable hypotheses, questions, or objectives. The methodology is developed to support these goals. We consider the merits and limitations of different types of analytic and descriptive studies, as well as of prospective vs retrospective enrollment. Investigators should define clear inclusion and exclusion criteria and select adequate numbers of study subjects, including careful selection of the most appropriate controls. Studies of causality must consider the temporal relationships between variables and the advantages of measuring incident cases rather than prevalent cases. Investigators must consider unique aspects of studies based on archived laboratory case material and take particular care to consider and mitigate the potential for selection bias and information bias. We close by discussing approaches to adding value and impact to observational studies. Part 2 of the series focuses on methodology and validation of methods
Using Boulder Tracks as a Tool to Understand the Bearing Capacity of Permanently Shadowed Regions of the Moon
Permanently shadowed regions (PSRs) are abundant at the lunar poles. They experience no direct sunlight and reach temperatures as low as 30 K. PSRs are of interest as evidence suggests that some may contain water ice (H2O/OHâ), which could provide a record of the evolution of volatiles in the inner solar system. This water ice is also a critical resource for lifeâsupport systems and rocket propellant. A better understanding of mechanical properties of PSR regolith, such as its bearing capacity, will help optimize the design of future exploration rovers and landers. Thirteen boulder tracks were identified on the edge of, or inside, south polar lunar PSR enhanced imagery and used to estimate the strength of the PSR regolith at latitudes of 70° to 76° in sites with maximum annual temperatures of 65 to 210 K. PSR boulder track features are similar to those observed in highland, mare, and pyroclastic regions of the Moon, implying similar properties of the regolith. Measured features were used to estimate bearing capacity for PSR regolith at depths of ~0.28 to 4.68 m. Estimated bearing capacity values suggest that these PSRs may be somewhat stronger than highland and mare regions at depths of 0.28 to 1.00 m. Bearing capacity in these PSRs is statistically the same as those in other regions of the Moon at depths of 1.00 to 2.00 m. The results of this study can be used to infer bearing capacity as one measure for the trafficability of lowerâlatitude PSRs of the type measured here
The Infrared Spectral Properties of Magellanic Carbon Stars
The Infrared Spectrograph on the Spitzer Space Telescope observed 184 carbon stars in the Magellanic Clouds. This sample reveals that the dust-production rate (DPR) from carbon stars generally increases with the pulsation period of the star. The composition of the dust grains follows two condensation sequences, with more SiC condensing before amorphous carbon in metal-rich stars, and the order reversed in metal-poor stars. MgS dust condenses in optically thicker dust shells, and its condensation is delayed in more metal-poor stars. Metal-poor carbon stars also tend to have stronger absorption from C2H2 at 7.5 ÎŒm. The relation between DPR and pulsation period shows significant apparent scatter, which results from the initial mass of the star, with more massive stars occupying a sequence parallel to lower-mass stars, but shifted to longer periods. Accounting for differences in the mass distribution between the carbon stars observed in the Small and Large Magellanic Clouds reveals a hint of a subtle decrease in the DPR at lower metallicities, but it is not statistically significant. The most deeply embedded carbon stars have lower variability amplitudes and show SiC in absorption. In some cases they have bluer colors at shorter wavelengths, suggesting that the central star is becoming visible. These deeply embedded stars may be evolving off of the asymptotic giant branch and/or they may have non-spherical dust geometries
Recommended from our members
Analysis of Lunar Boulder Tracks: Implications for Trafficability of Pyroclastic Deposits
In a new era of lunar exploration, pyroclastic deposits have been identified as valuable targets for resource utilization and scientific inquiry. Little is understood about the geomechanical properties and the trafficability of the surface material in these areas, which is essential for successful mission planning and execution. Past incidents with rovers highlight the importance of reliable information about surface properties for future, particularly robotic, lunar mission concepts. Characteristics of 149 boulder tracks are measured in Lunar Reconnaissance Orbiter Narrow Angle Camera images and used to derive the bearing capacity of pyroclastic deposits and, for comparison, mare and highland regions from the surface down to ~5âm depth, as a measure of trafficability. Results are compared and complemented with bearing capacity values calculated from physical property data collected in situ during Apollo, Surveyor, and Lunokhod missions. Qualitative observations of tracks show no regionâdependent differences, further suggesting similar geomechanical properties in the regions. Generally, bearing capacity increases with depth and decreases with higher slope gradients, independent of the type of region. At depths of 0.19 to 5 m, pyroclastic materials have bearing capacities equal or higher than those of mare and highland material and, thus, may be equally trafficable at surface level. Calculated bearing capacities based on orbital observations are consistent with values derived using in situ data. Bearing capacity values are used to estimate wheel sinkage of rover concepts in pyroclastic deposits. This study's findings can be used in the context of traverse planning, rover design, and in situ extraction of lunar resources
- âŠ