Estimates of cetacean abundance in European Atlantic waters in summer

This report summarises design-based estimates of abundance for those cetacean species for which sufficient data were obtained during SCANS-III: harbour porpoise, bottlenose dolphin, Risso’s dolphin, white-beaked dolphin, white-sided dolphin, common dolphin, striped dolphin, pilot whale, all beaked whale species combined, sperm whale, minke whale and fin whale

Enhanced separation of bioactive triterpenic acids with a triacontylsilyl silica gel adsorbent: from impulse and breakthrough experiments to the design of a simulated moving bed unit

A simulated moving bed (SMB) unit was designed to separate oleanolic and ursolic acids, two naturally occurring triterpenoids with structural isomerism, with remarkable nutraceutical and pharmacological properties. A triacontylsilyl silica gel adsorbent (stationary phase of an Acclaim C30 column) was considered and impulse tests with different solvents were performed to select a mobile phase, from which methanol/water 95/5 (%, v/v) emerged as the most suitable. Equilibrium and global mass transport coefficients were then determined through breakthrough experiments using pure compound solutions and the C30 column. Afterwards, these parameters were applied to the simulation of two model binary mixture separations, whose breakthrough curves were also experimentally measured. Finally, the SMB unit was designed and optimized. It was demonstrated that using the packing of an Acclaim C30 column and methanol/water 95/5 (%, v/v) as mobile phase it is possible to separate both acids with purities of 99.9 wt.%, a productivity of 1.705 kg/(m3adsorbent day), and a configuration of two columns per section (2–2–2–2). The simulated results obtained in this work with the C30 stationary phase represent a significant improvement over literature data.publishe

Continuous media interpretation of supersymmetric Wess-Zumino type models

Supersymmetric Wess-Zumino type models are considered as classical material media that can be interpreted as fluids of ordered strings with heat flow along the strings or a mixture of fluids of ordered strings with either a cloud of particles or a flux of directed radiation.Comment: 14 pages, Latex, No Figure

Impact of dried brewers’ grains supplementation on performance, metabolism and meat quality of broiler chickens

The objective was to evaluate increasing levels of dried brewers’ grains (DBG) in feed for broiler chickens from 1 to 21 days old and their effect on performance, blood parameters, intestinal morphometry, carcass characteristics and meat quality. The design was completely randomized with six treatments, which consisted of various levels of DBG inclusion, namely 0 (no inclusion), 20, 40, 60, 80, and 100 g/kg with seven replications and 17 animals per experimental unit, totalling 714 male broilers. Performance parameters, blood biochemical profile, morphology of the intestinal epithelium (duodenum), and carcass yield and composition were evaluated. Feed intake was not changed by DBG inclusion levels. Nor were weight gain and feed conversion ratio. Serum cholesterol levels were not influenced, and there were no effects on triglyceride, uric acid and creatinine levels. Enzyme aspartate aminotransferase showed a quadratic effect, as did alanine aminotransferase, with higher values at 79.5 and 63.9 g/kg DBG inclusion, respectively. No changes in carcass yield and relative organ weight were observed. The composition of the carcass in ether extract showed a quadratic effect, as fat deposition rate, with lowest values at 62.8 and 62.4 g/kg of DBG inclusion levels, respectively. Crude protein levels in carcass reduced linearly, as did fat deposition rate. The parameters of intestinal morphology and meat quality were not changed. Dried brewers’ grains can be included in broiler diet from 1 to 21 days at levels up to 100 g/kg without influencing the metabolic parameters and broiler performance. Keywords: alternative feed, blood, by-product, intestinal villi, performanc

Pool trading model within a local energy community considering flexible loads, photovoltaic generation and energy storage systems

This paper presents a pool trading model within a local energy community considering home energy management systems (HEMSs) and other consumers. A transparent mechanism for market clearing is proposed to incentivise active prosumers to trade their surplus energy within a rule-based pool market in the local energy community. A price-based demand response program (PBDRP) is considered to increase the consumers’ willingness to modify their consumption. The mathematical optimization problem is a standard mixed-integer linear programming (MILP) problem to allow for rapid assessment of the trading market for real energy communities which have a considerable number of consumers. This allows for novel energy trading strategies amongst different clients in the model and for the integration of a pool energy trading model at the level of the local energy community. The objective function of the energy community is to minimize the overall bills of all participants while fulfilling their demands. Two different scenarios have been evaluated, independent and integrated operation modes, to show the impacts of coordination amongst different end-users. Results show that through cooperation, end-users in the local energy community market can reduce the total electricity bill. This is shown in a 16.63% cost reduction in the independent operation and a 21.38% reduction in the integrated case. Revenues for active consumers under coordination increased compared to independent operation of the HEMS.© 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

Energy storage system impact on the operation of a demand response aggregator

In this paper, we consider a demand response (DR) aggregator responsible for participating in the wholesale electricity market on behalf of the end-users who participated in the DR programs. Thus, the DR aggregator can trade its acquired DR within the short-term electricity markets, i.e., the day-ahead and the balancing (real-time) markets. In the proposed framework, the electricity market prices are considered uncertain, and a robust optimization approach is applied to address the uncertainties to maximize the profit of the DR aggregator. A model for analyzing the impact of the energy storage system (ESS) unit on a DR aggregator's performance is developed to provide more flexibility for the consumers. The direct interactions of a DR aggregator with an ESS are neglected in many models. However, this consideration can lead to improvement in the flexibility of the aggregator and also increase the profit of the entity by trading energy in the short-term markets to charge the ESS during the low-price periods and discharge it to the market while the electricity market prices are high. Hence, it is assumed that the DR aggregator owns an ESS unit and can cover a percentage of its traded power through the ESS. An analysis of the impact of the ESS unit on the DR aggregator's performance is applied to study the most appropriate size of the ESS that can maximize the profit of the aggregator. In addition, renewable energy production is employed for end-users through the installation of rooftop photovoltaic (PV) panels. This demand-side renewable generation can provide more flexibility for the participants in DR programs. Various feasible case studies have been applied to demonstrate the model's effectiveness and usefulness, and conclusions are duly drawn. The numerical results indicate that having an ESS seems necessary when the decision-maker desires to protect its profit from the worst-case scenarios and reduces the negative effect of the uncertain parameter, i.e., the wholesale electricity market prices. Thus, it can be shown that having a greater capacity for the ESS has a significant and direct impact on increasing the profit of the aggregator even in the worst-case scenarios, where the profit rises 20 % when the budget of uncertainty in the robust optimization is equal to 12.© 2023 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

Review on the Energy Storage Technologies with the Focus on Multi-Energy Systems

Energy storage is an important element of an energy system. In the power system, energy storage can be defined as a component that can be employed to generate a form of energy or utilize previously stored energy at different locations or times when it is required. Energy storage can enhance the stability of the grid, increase the reliability and efficiency of integrated systems that include renewable energy resources, and can also reduce emissions. A diverse set of storage technologies are currently utilized for the energy storage systems (ESSs) in a varied set of projects. This chapter provides information about the current ESS projects around the world and emphasizes the leading countries that are developing the applications of ESSs. The main categories of ESSs are explained in this chapter as follows: electrochemical, electromechanical, electromagnetic, and thermal storage. Moreover, the energy storage technologies are utilized in power grids for various reasons such as electricity supply capacity, electric energy time-shifting, on-site power, electric supply reserve capacity, frequency regulation, voltage support, and electricity bill management. Additionally, by integrating the various energy forms and developing the concept of multi-energy systems, ESSs become a fundamental component for the efficient operation of multi-energy systems. The main role of ESSs in multi-energy systems is to compensate for the fluctuations in power output from renewable energy resources. Moreover, the performance of the multi-energy system increases when it got integrated with an ESS. In this chapter, the applied ESS technologies in the context of the multi-energy systems are presented and explained.©2022 Wiley-VCH Verlag. This is the peer reviewed version of the following article: Vahid-Ghavidel, M., Javadi, S., Gough, M., Javadi, M. S., Santos, S. F., Shafie-khah, M. & Catalão, J. P.S. (2022). Review on the Energy Storage Technologies with the Focus on Multi-Energy Systems. In: Graditi, G. & Di Somma, M. (eds.) Technologies for Integrated Energy Systems and Networks, 105-122, which has been published in final form at https://doi.org/10.1002/9783527833634.ch5. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited.fi=vertaisarvioitu|en=peerReviewed

The effect of amoxicillin on dental enamel development in vivo

The exposure to amoxicillin has been associated with molar incisor hypomineralization. This study aimed to determine if amoxicillin disturbs the enamel mineralization in in vivo experiments. Fifteen pregnant rats were randomly assigned into three groups to received daily phosphatase-buffered saline or amoxicillin as either 100 or 500 mg/kg. Mice received treatment from day 13 of pregnancy to day 40 postnatal. After birth, the offsprings from each litter continued to receive the same treatment according to their respective group. Calcium (Ca) and phosphorus (P) content in the dental hard tissues were analyzed from 60 upper first molars and 60 upper incisors by the complexometric titration method and colorimetric analysis using a spectrophotometer at 680 nm, respectively. Lower incisors were analyzed by X-ray microtomography, it was measured the electron density of lingual and buccal enamel, and the enamel and dentin thickness. Differences in Ca and P content and electron density among the groups were analyzed by one-way ANOVA. There was no significant difference on enamel electron density and thickness among the groups (p > 0.05). However, in incisors, the higher dose of amoxicillin decreased markedly the electron density in some rats. There were no statistically significant differences in Ca (p = 0.180) or P content (p = 0.054), although the higher dose of amoxicillin could affect the enamel in some animals. The amoxicillin did not significantly alter the enamel mineralization and thickness in rats. © 2020Peer reviewe