Raman Spectra of ZrS2 and ZrSe2 from Bulk to Atomically Thin Layers

In the race towards two-dimensional electronic and optoelectronic devices, semiconducting transition metal dichalcogenides (TMDCs) from group VIB have been intensively studied in recent years due to the indirect to direct band-gap transition from bulk to the monolayer. However, new materials still need to be explored. For example, semiconducting TMDCs from group IVB have been predicted to have larger mobilities than their counterparts from group VIB in the monolayer limit. In this work we report the mechanical exfoliation of ZrX2 (X = S, Se) from bulk down to the monolayer and we study the dimensionality dependence of the Raman spectra in ambient conditions. We observe Raman signal from bulk to few layers and no shift in the peak positions is found when decreasing the dimensionality. While a Raman signal can be observed from bulk to a bilayer for ZrS2, we could only detect signal down to five layers for flakes of ZrSe2. These results show the possibility of obtaining atomically thin layers of ZrX2 by mechanical exfoliation and represent one of the first steps towards the investigation of the properties of these materials, still unexplored in the two-dimensional limit

Nanomechanical absorption spectroscopy of 2D materials with femtowatt sensitivity

Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has practical advantages compared to common optical spectroscopy approaches. In the case of two-dimensional (2D) materials, NMS overcomes limitations inherent to conventional optical methods, such as the complications associated with measurements at high magnetic fields and low temperatures. In this work, we develop a protocol for NMS of 2D materials that yields two orders of magnitude improved sensitivity compared to previous approaches, while being simpler to use. To this end, we use mechanical sample actuation, which simplifies the experiment and provides a reliable calibration for greater accuracy. Additionally, the use of low-stress silicon nitride membranes as our substrate reduces the noise-equivalent power to $\textrm {NEP} = 890$ fW $\sqrt{\mathrm{Hz}}^{-1}$, comparable to commercial semiconductor photodetectors. We use our approach to spectroscopically characterize a 2D transition metal dichalcogenide (WS2), a layered magnetic semiconductor (CrPS4), and a plasmonic super-crystal consisting of gold nanoparticles

Low-Frequency Imaginary Impedance at the Superconducting Transition of 2H-NbSe2

The superconducting transition leads to a sharp resistance drop in a temperature interval that can be a small fraction of the critical temperature Tc. A superconductor exactly at Tc is thus very sensitive to all kinds of thermal perturbation, including the heat dissipated by the measurement current. We show that the interaction between electrical and thermal currents leads to a sizable imaginary impedance at frequencies of the order of tens of hertz at the resistive transition of single crystals of the layered material 2H-NbSe2.We explain the result using models developed for transition-edge sensors. By measuring under magnetic fields and at high currents, we find that the imaginary impedance is strongly influenced by the heat associated with vortex motion and out-of-equilibrium quasiparticles

Charge-transfer interactions between fullerenes and a mesoporous tetrathiafulvalene-based metal-organic framework

The design of metal-organic frameworks (MOFs) incorporating electroactive guest molecules in the pores has become a subject of great interest in order to obtain additional electrical functionalities within the framework while maintaining porosity. Understanding the charge-transfer (CT) process between the framework and the guest molecules is a crucial step towards the design of new electroactive MOFs. Herein, we present the encapsulation of fullerenes (C60) in a mesoporous tetrathiafulvalene (TTF)-based MOF. The CT process between the electron-acceptor C60 guest and the electron-donor TTF ligand is studied in detail by means of different spectroscopic techniques and density functional theory (DFT) calculations. Importantly, gas sorption measurements demonstrate that sorption capacity is maintained after encapsulation of fullerenes, whereas the electrical conductivity is increased by two orders of magnitude due to the CT interactions between C60 and the TTF-based framework

Interplay between optical emission and magnetism in the van der Waals magnetic semiconductor CrSBr in the two-dimensional limit

The Van der Waals semiconductor metamagnet CrSBr offers an ideal platform for studying the interplay between optical and magnetic properties in the two-dimensional limit. Here, we carried out an exhaustive optical characterization of this material by means of temperature and magnetic field dependent photoluminescence (PL) on flakes of different thicknesses down to the monolayer. We found a characteristic emission peak that is quenched upon switching the ferromagnetic layers from an antiparallel to a parallel configuration and exhibits a different temperature dependence from that of the peaks commonly ascribed to excitons. The contribution of this peak to the PL is boosted around 30-40 K, coinciding with the hidden order magnetic transition temperature. Our findings reveal the connection between the optical and magnetic properties via the ionization of magnetic donor vacancies. This behavior enables a useful tool for the optical reading of the magnetic states in atomically thin layers of CrSBr and shows the potential of the design of two-dimensional heterostructures with magnetic and excitonic properties.Comment: 20 pages, 5 figure

Interplay between optical emission and magnetism in the van der Waals magnetic semiconductor CrSBr in the two-dimensional limit

The van der Waals semiconductor metamagnet CrSBr offers an ideal platform for studying the interplay between optical and magnetic properties in the two-dimensional limit. Here, we carried out an exhaustive optical characterization of this material by means of temperature- and magnetic-field-dependent photoluminescence (PL) on flakes of different thicknesses down to the monolayer. We found a characteristic emission peak that is quenched upon switching the ferromagnetic layers from an antiparallel to a parallel configuration and exhibits a temperature dependence different from that of the peaks commonly ascribed to excitons. The contribution of this peak to the PL is boosted around 30-40 K, coinciding with the hidden order magnetic transition temperature. Our findings reveal the connection between the optical and magnetic properties via the ionization of magnetic donor vacancies. This behavior enables a useful tool for the optical reading of the magnetic states in atomically thin layers of CrSBr and shows the potential of the design of 2D heterostructures with magnetic and excitonic properties

Out-of-Plane Transport of 1T-TaS2/Graphene-Based van der Waals Heterostructures

Due to their anisotropy, layered materials are excellent candidates for studying the interplay between the in-plane and out-of-plane entanglement in strongly correlated systems. A relevant example is provided by 1T-TaS2, which exhibits a multifaceted electronic and magnetic scenario due to the existence of several charge density wave (CDW) configurations. It includes quantum hidden phases, superconductivity and exotic quantum spin liquid (QSL) states, which are highly dependent on the out-of-plane stacking of the CDW. In this system, the interlayer stacking of the CDW is crucial for interpreting the underlying electronic and magnetic phase diagram. Here, atomically thin-layers of 1T-TaS2 are integrated in vertical van der Waals heterostructures based on few-layers graphene contacts and their electrical transport properties are measured. Different activation energies in the conductance and a gap at the Fermi level are clearly observed. Our experimental findings are supported by fully self-consistent DFT+U calculations, which evidence the presence of an energy gap in the few-layer limit, not necessarily coming from the formation of out-of-plane spin-paired bilayers at low temperatures, as previously proposed for the bulk. These results highlight dimensionality as a key effect for understanding quantum materials as 1T-TaS2, enabling the possible experimental realization of low-dimensional QSLs

Switching the Magnetic Vortex Core in a Single Nanoparticle

Imaging and manipulating the spin structure of nano- and mesoscale magnetic systems is a challenging topic in magnetism, yielding a wide range of spin phenomena such as skyrmions, hedgehog-like spin structures, or vortices. A key example has been provided by the vortex spin texture, which can be addressed in four independent states of magnetization, enabling the development of multibit magnetic storage media. Most of the works devoted to the study of the magnetization reversal mechanisms of the magnetic vortices have been focused on micrometer-size magnetic platelets. Here we report the experimental observation of the vortex state formation and annihilation in individual 25 nm molecular-based magnetic nanoparticles measured by low-temperature variable-field magnetic force microscopy. Interestingly, in these nanoparticles the switching of the vortex core can be induced with very small values of the applied static magnetic field

Multistep magnetization switching in orthogonally twisted ferromagnetic monolayers

The advent of twist-engineering in two-dimensional (2D) crystals enables the design of van der Waals (vdW) heterostructures exhibiting emergent properties. In the case of magnets, this approach can afford artificial antiferromagnets with tailored spin arrangements. Here, we fabricate an orthogonally-twisted bilayer by twisting 90 degrees two CrSBr ferromagnetic monolayers with an easy-axis in-plane anisotropy. The magneto-transport properties reveal multistep magnetization switching with a magnetic hysteresis opening, that is absent in the pristine case. By tuning the magnetic field, we modulate the remanent state and coercivity and select between hysteretic and non-hysteretic magneto-resistance scenarios. This complexity pinpoints spin anisotropy as a key aspect in twisted magnetic superlattices. Our results highlight the control over the magnetic properties in vdW heterostructures, leading to a variety of field-induced phenomena and opening a fruitful playground for creating desired magnetic symmetries and manipulating non-collinear magnetic configurations.Comment: Main Text + Supplementary Informatio

Local Oxidation Nanolithography on Metallic Transition Metal Dichalcogenides Surfaces

The integration of atomically-thin layers of two dimensional (2D) materials in nanodevices demands for precise techniques at the nanoscale permitting their local modification, structuration or resettlement. Here, we present the use of Local Oxidation Nanolithography (LON) performed with an Atomic Force Microscope (AFM) for the patterning of nanometric motifs on different metallic Transition Metal Dichalcogenides (TMDCs). We show the results of a systematic study of the parameters that affect the LON process as well as the use of two different modes of lithographic operation: dynamic and static. The application of this kind of lithography in different types of TMDCs demonstrates the versatility of the LON for the creation of accurate and reproducible nanopatterns in exfoliated 2D-crystals and reveals the influence of the chemical composition and crystalline structure of the systems on the morphology of the resultant oxide motifs