22 research outputs found

    Prospective comparison of F-18-PSMA-1007 PET/CT, whole-body MRI and CT in primary nodal staging of unfavourable intermediate- and high-risk prostate cancer

    Get PDF
    Purpose To prospectively compare F-18-prostate-specific membrane antigen (PSMA)-1007 positron emission tomography (PET)/CT, whole-body magnetic resonance imaging (WBMRI) including diffusion-weighted imaging (DWI) and standard computed tomography (CT), in primary nodal staging of prostate cancer (PCa). Methods Men with newly diagnosed unfavourable intermediate- or high-risk PCa prospectively underwent F-18-PSMA-1007 PET/CT, WBMRI with DWI and contrast-enhanced CT within a median of 8 days. Six readers (two for each modality) independently reported pelvic lymph nodes as malignant, equivocal or benign while blinded to the other imaging modalities. Sensitivity, specificity and accuracy were reported according to optimistic (equivocal lesions interpreted as benign) and pessimistic (equivocal lesions interpreted as malignant) analyses. The reference standard diagnosis was based on multidisciplinary consensus meetings where available histopathology, clinical and follow-up data were used. Results Seventy-nine patients completed all the imaging modalities, except for one case of interrupted WBMRI. Thirty-one (39%) patients had pelvic lymph node metastases, which were detected in 27/31 (87%), 14/31 (45%) and 8/31 (26%) patients by F-18-PSMA-1007 PET/CT, WBMRI with DWI and CT, respectively (optimistic analysis). In 8/31 (26%) patients, only F-18-PSMA-1007 PET/CT detected malignant lymph nodes, while the other two imaging modalities were reported as negative. At the patient level, sensitivity and specificity values for F-18-PSMA-1007 PET/CT, WBMRI with DWI and CT in optimistic analysis were 0.87 (95%CI 0.71-0.95) and 0.98 (95%CI 0.89-1.00), 0.37 (95%CI 0.22-0.55) and 0.98 (95%CI 0.89-1.00) and 0.26 (95%CI 0.14-0.43) and 1.00 (95%CI 0.93-1.00), respectively. Conclusion F-18-PSMA-1007 PET/CT showed significantly greater sensitivity in nodal staging of primary PCa than did WBMRI with DWI or CT, while maintaining high specificity.Peer reviewe

    A Prospective Comparison of F-18-prostate-specific Membrane Antigen-1007 Positron Emission Tomography Computed Tomography, Whole-body 1.5 T Magnetic Resonance Imaging with Diffusion-weighted Imaging, and Single-photon Emission Computed Tomography/Computed Tomography with Traditional Imaging in Primary Distant Metastasis Staging of Prostate Cancer (PROSTAGE)

    Get PDF
    Background: Computed tomography (CT) and bone scintigraphy (BS) are the imaging modalities currently used for distant metastasis staging of prostate cancer (PCa). Objective: To compare standard staging modalities with newer and potentially more accurate imaging modalities. Design, setting, and participants: This prospective, single-centre trial (NCT03537391) enrolled 80 patients with newly diagnosed high-risk PCa (International Society of Urological Pathology grade group >= 3 and/or prostate-specific antigen [PSA] >= 20 and/or cT >= T3; March 2018-June 2019) to undergo primary metastasis staging with two standard and three advanced imaging modalities. Outcome measurements and statistical analysis: The participants underwent the following five imaging examinations within 2 wk of enrolment and without a prespecified sequence: BS, CT, Tc-99m-hydroxymethylene diphosphonate (Tc-99m-HMDP) single-photon emission computed tomography (SPECT)-CT, 1.5 T whole-body magnetic resonance imaging (WBMRI) using diffusion-weighted imaging, and F-18-prostate-specific membrane antigen-1007 (F-18-PSMA-1007) positron emission tomography(PET)-CT. Each modality was reviewed by two independent experts blinded to the results of the prior studies, who classified lesions as benign, equivocal, or malignant. Pessimistic and optimistic analyses were performed to resolve each equivocal diagnosis. The reference standard diagnosis was defined using all available information accrued during at least 12 mo of clinical follow-up. Patients with equivocal reference standard diagnoses underwent MRI and/or CT to search for the development of anatomical correspondence. PSMA PET-avid lesions without histopathological verification were rated to be malignant only if there was a corresponding anatomical finding suspicious for malignancy at the primary or follow-up imaging. Results and limitations: Seventy-nine men underwent all imaging modalities except for one case of interrupted MRI. The median interval per patient between the first and the last imaging study was 8 d (interquartile range [IQR]: 6-9). The mean age was 70 yr (standard deviation: 7) and median PSA 12 ng/mL (IQR:7-23). The median follow-up was 435 d (IQR: 378-557). Metastatic disease was detected in 20 (25%) patients. The imaging modality F-18-PSMA-1007 PET-CT had superior sensitivity and highest inter-reader agreement. The area under the receiver-operating characteristic curve (AUC) values for bone metastasis detection with PSMA PET-CT were 0.90 (95% confidence interval [CI]: 0.85-0.95) and 0.91 (95% CI: 0.87-0.96) for readers 1 and 2, respectively, while the AUC values for BS, CT, SPECT-CT, and WBMRI were 0.71 (95% CI: 0.58-0.84) and 0.8 (95% CI: 0.67-0.92), 0.53 (95% CI: 0.39-0.67) and 0.66 (95% CI: 0.54-0.77), 0.77 (95% CI: 0.65-0.89) and 0.75 (95% CI: 0.62-0.88), and 0.85 (95% CI: 0.74-0.96) and 0.67 (95% CI: 0.54-0.80), respectively, for the other four pairs of readers. The imaging method F-18-PSMA-1007 PET-CT detected metastatic disease in 11/20 patients in whom standard imaging was negative and influenced clinical decision making in 14/79 (18%) patients. In 12/79 cases, false positive bone disease was reported only by PSMA PET-CT. Limitations included a nonrandomised study setting and few histopathologically validated suspicious lesions. Conclusions: Despite the risk of false positive bone lesions, F-18-PSMA-1007 PET-CT outperformed all other imaging methods studied for the detection of primary distant metastasis in high-risk PCa. Patient summary: In this report, we compared the diagnostic performance of conventional and advanced imaging. It was found that F-18-prostate-specific membrane antigen-1007 positron emission tomography/computed tomography (F-18-PSMA-1007 PET-CT) was superior to the other imaging modalities studied for the detection of distant metastasis at the time of initial diagnosis of high-risk prostate cancer. PSMA PET-CT also appears to detect some nonmetastatic bone lesions. (C) 2020 The Author(s). Published by Elsevier B.V. on behalf of European Association of Urology.Peer reviewe

    Metallic contact between MoS2 and Ni via Au nanoglue

    Get PDF
    A critical factor for electronics based on inorganic layered crystals stems from the electrical contact mode between the semiconducting crystals and the metal counterparts in the electric circuit. Here, a materials tailoring strategy via nanocomposite decoration is carried out to reach metallic contact between MoS2 matrix and transition metal nanoparticles. Nickel nanoparticles (NiNPs) are successfully joined to the sides of a layered MoS2 crystal through gold nanobuffers, forming semiconducting and magnetic NiNPs@MoS2 complexes. The intrinsic semiconducting property of MoS2 remains unchanged, and it can be lowered to only few layers. Chemical bonding of the Ni to the MoS2 host is verified by synchrotron radiation based photoemission electron microscopy, and further proved by first- principles calculations. Following the system's band alignment, new electron migration channels between metal and the semiconducting side contribute to the metallic contact mechanism, while semiconductor–metal heterojunctions enhance the photocatalytic ability

    Prospective comparison of 18F-PSMA-1007 PET/CT, whole-body MRI and CT in primary nodal staging of unfavourable intermediate- and high-risk prostate cancer

    Get PDF
    Purpose To prospectively compare F-18-prostate-specific membrane antigen (PSMA)-1007 positron emission tomography (PET)/CT, whole-body magnetic resonance imaging (WBMRI) including diffusion-weighted imaging (DWI) and standard computed tomography (CT), in primary nodal staging of prostate cancer (PCa).Methods Men with newly diagnosed unfavourable intermediate- or high-risk PCa prospectively underwent F-18-PSMA-1007 PET/CT, WBMRI with DWI and contrast-enhanced CT within a median of 8 days. Six readers (two for each modality) independently reported pelvic lymph nodes as malignant, equivocal or benign while blinded to the other imaging modalities. Sensitivity, specificity and accuracy were reported according to optimistic (equivocal lesions interpreted as benign) and pessimistic (equivocal lesions interpreted as malignant) analyses. The reference standard diagnosis was based on multidisciplinary consensus meetings where available histopathology, clinical and follow-up data were used.Results Seventy-nine patients completed all the imaging modalities, except for one case of interrupted WBMRI. Thirty-one (39%) patients had pelvic lymph node metastases, which were detected in 27/31 (87%), 14/31 (45%) and 8/31 (26%) patients by F-18-PSMA-1007 PET/CT, WBMRI with DWI and CT, respectively (optimistic analysis). In 8/31 (26%) patients, only F-18-PSMA-1007 PET/CT detected malignant lymph nodes, while the other two imaging modalities were reported as negative. At the patient level, sensitivity and specificity values for F-18-PSMA-1007 PET/CT, WBMRI with DWI and CT in optimistic analysis were 0.87 (95%CI 0.71-0.95) and 0.98 (95%CI 0.89-1.00), 0.37 (95%CI 0.22-0.55) and 0.98 (95%CI 0.89-1.00) and 0.26 (95%CI 0.14-0.43) and 1.00 (95%CI 0.93-1.00), respectively.Conclusion F-18-PSMA-1007 PET/CT showed significantly greater sensitivity in nodal staging of primary PCa than did WBMRI with DWI or CT, while maintaining high specificity.</div

    A Prospective Comparison of 18F-prostate-specific Membrane Antigen-1007 Positron Emission Tomography Computed Tomography, Whole-body 1.5 T Magnetic Resonance Imaging with Diffusion-weighted Imaging, and Single-photon Emission Computed Tomography/Computed Tomography with Traditional Imaging in Primary Distant Metastasis Staging of Prostate Cancer (PROSTAGE)

    Get PDF
    Background: Computed tomography (CT) and bone scintigraphy (BS) are the imaging modalities currently used for distant metastasis staging of prostate cancer (PCa).Objective: To compare standard staging modalities with newer and potentially more accurate imaging modalities.Design, setting, and participants: This prospective, single-centre trial (NCT03537391) enrolled 80 patients with newly diagnosed high-risk PCa (International Society of Urological Pathology grade group ≥3 and/or prostate-specific antigen [PSA] ≥20 and/or cT ≥ T3; March 2018-June 2019) to undergo primary metastasis staging with two standard and three advanced imaging modalities.Outcome measurements and statistical analysis: The participants underwent the following five imaging examinations within 2 wk of enrolment and without a prespecified sequence: BS, CT, 99mTc-hydroxymethylene diphosphonate (99mTc-HMDP) single-photon emission computed tomography (SPECT)-CT, 1.5 T whole-body magnetic resonance imaging (WBMRI) using diffusion-weighted imaging, and 18F-prostate-specific membrane antigen-1007 (18F-PSMA-1007) positron emission tomography(PET)-CT. Each modality was reviewed by two independent experts blinded to the results of the prior studies, who classified lesions as benign, equivocal, or malignant. Pessimistic and optimistic analyses were performed to resolve each equivocal diagnosis. The reference standard diagnosis was defined using all available information accrued during at least 12 mo of clinical follow-up. Patients with equivocal reference standard diagnoses underwent MRI and/or CT to search for the development of anatomical correspondence. PSMA PET-avid lesions without histopathological verification were rated to be malignant only if there was a corresponding anatomical finding suspicious for malignancy at the primary or follow-up imaging.Results and limitations: Seventy-nine men underwent all imaging modalities except for one case of interrupted MRI. The median interval per patient between the first and the last imaging study was 8 d (interquartile range [IQR]: 6-9). The mean age was 70 yr (standard deviation: 7) and median PSA 12 ng/mL (IQR:7-23). The median follow-up was 435 d (IQR: 378-557). Metastatic disease was detected in 20 (25%) patients. The imaging modality 18F-PSMA-1007 PET-CT had superior sensitivity and highest inter-reader agreement. The area under the receiver-operating characteristic curve (AUC) values for bone metastasis detection with PSMA PET-CT were 0.90 (95% confidence interval [CI]: 0.85-0.95) and 0.91 (95% CI: 0.87-0.96) for readers 1 and 2, respectively, while the AUC values for BS, CT, SPECT-CT, and WBMRI were 0.71 (95% CI: 0.58-0.84) and 0.8 (95% CI: 0.67-0.92), 0.53 (95% CI: 0.39-0.67) and 0.66 (95% CI: 0.54-0.77), 0.77 (95% CI: 0.65-0.89) and 0.75 (95% CI: 0.62-0.88), and 0.85 (95% CI: 0.74-0.96) and 0.67 (95% CI: 0.54-0.80), respectively, for the other four pairs of readers. The imaging method 18F-PSMA-1007 PET-CT detected metastatic disease in 11/20 patients in whom standard imaging was negative and influenced clinical decision making in 14/79 (18%) patients. In 12/79 cases, false positive bone disease was reported only by PSMA PET-CT. Limitations included a nonrandomised study setting and few histopathologically validated suspicious lesions.Conclusions: Despite the risk of false positive bone lesions, 18F-PSMA-1007 PET-CT outperformed all other imaging methods studied for the detection of primary distant metastasis in high-risk PCa.Patient summary: In this report, we compared the diagnostic performance of conventional and advanced imaging. It was found that 18F-prostate-specific membrane antigen-1007 positron emission tomography/computed tomography (18F-PSMA-1007 PET-CT) was superior to the other imaging modalities studied for the detection of distant metastasis at the time of initial diagnosis of high-risk prostate cancer. PSMA PET-CT also appears to detect some nonmetastatic bone lesions.</p

    Sekvenssien visualisointi operaattorille Siemens TIA Portal -ympäristöön

    Get PDF
    Logiikkaohjelmointi on työläs vaihe automaatioalan projekteissa. Ohjelmointia voidaan kuitenkin nopeuttaa valmiiksi luotujen logiikkaohjelmointipohjien avulla. Näitä ohjel-mointipohjia voivat olla esimerkiksi erilaisten laitteiden, kuten moottorien ja venttiilien, ohjaukset. Ohjelmointipohjia on hyvä päivittää ja tehdä myös uusia koko ajan kehittyvällä alalla. Työn tavoitteena oli luoda logiikkaohjelmointipohja, jota pystyttäisiin hyödyntämään sekvenssien visualisoinnissa ja ohjauksessa. Ohjelmointipohja helpottaa itse logiikkaoh-jelmointiosuutta sekä laitteiden ja prosessien käyttöönottoa. Pohjasta tulee olemaan hyötyä myös laitteistojen ja prosessien käyttäjille. Operaattori pystyy helposti näkemään, mitä prosessissa tapahtuu ja vikatilanteiden ilmetessä ongelma on helpompi paikantaa. Ohjelmointipohjat auttavat vähentämään myös mahdollisten virheiden määrää ohjelma-koodissa. Opinnäytetyö on jatkoa toimeksiantajan aikaisemmalle kehitystyölle. Työn tuloksena syntyi kaksi logiikkaohjelmointipohjaa, joita voidaan hyödyntää sekvens-sien kanssa. Näille pohjille tehtiin myös erilliset ohjeistukset, jotka on esitetty raportin liitteissä. Ensimmäistä pohjaa pystytään hyödyntämään sekvenssien ohjauksessa ja toista taas sekvenssien visualisoinnissa. Pohjien ulkoasua ja toimintoja pystytään muokkaa-maan, jolloin pohjien toiminnot ja ulkoasu voidaan räätälöidä juuri kulloiseenkin projek-tiin sopivaksi. Tämä tarkoittaa myös sitä, että tulevaisuudessa näitä pohjia voidaan päivit-tää ja kehittää, jos ja kun uusia toimintoja halutaan ottaa käyttöön.PLC programming takes a great deal of time in automation industry projects. This can be made easier and faster with faceplates that control, for example, motors, valves, and other devices. It is very use-ful to upgrade these faceplates and make new faceplates in constantly growing automation industry. The thesis was assigned by JEEC Oy. JEEC offers engineering and consultant services in the fields of automation and electrification. The goal of the thesis was to make a faceplate that can be used to control and visualize sequences and to make the programming part easier and faster. This will also help the process operator. The operator can easily see what is happening in the process and if an error occurs, it is easier to locate. Faceplates help to minimize possible flaws in the code. The thesis resulted in two faceplates: one that can be used to control sequences and the other to visualize sequences. Both faceplates also contain manuals which are added at the end of this report. The layout and the functionality of the faceplates can be customized by the user to suit the particular project, which also means that in the future these faceplates can be updated, and more functions can be added to them

    Membrane-Dependent Binding and Entry Mechanism of Dopamine into Its Receptor

    Get PDF
    Synaptic neurotransmission has recently been proposed to function via either a membrane-independent or a membrane-dependent mechanism, depending on the neurotransmitter type. In the membrane-dependent mechanism, amphipathic neurotransmitters first partition to the lipid headgroup region and then diffuse along the membrane plane to their membrane-buried receptors. However, to date, this mechanism has not been demonstrated for any neurotransmitter-receptor complex. Here, we combined isothermal calorimetry measurements with a diverse set of molecular dynamics simulation methods to investigate the partitioning of an amphipathic neurotransmitter (dopamine) and the mechanism of its entry into the ligand-binding site. Our results show that the binding of dopamine to its receptor is consistent with the membrane-dependent binding and entry mechanism. Both experimental and simulation results showed that dopamine favors binding to lipid membranes especially in the headgroup region. Moreover, our simulations revealed a ligand-entry pathway from the membrane to the binding site. This pathway passes through a lateral gate between transmembrane alpha-helices 5 and 6 on the membrane-facing side of the protein. All in all, our results demonstrate that dopamine binds to its receptor by a membrane-dependent mechanism, and this is complemented by the more traditional binding mechanism directly through the aqueous phase. The results suggest that the membrane-dependent mechanism is common in other synaptic receptors, too.Peer reviewe

    Catalytic Oxidation of Dimethyl Disulfide over Bimetallic Cu–Au and Pt–Au Catalysts Supported on γ-Al2O3, CeO2, and CeO2–Al2O3

    No full text
    Dimethyl disulfide (DMDS, CH3SSCH3) is an odorous and harmful air pollutant (volatile organic compound (VOC)) causing nuisance in urban areas. The abatement of DMDS emissions from industrial sources can be realized through catalytic oxidation. However, the development of active and selective catalysts having good resistance toward sulfur poisoning is required. This paper describes an investigation related to improving the performance of Pt and Cu catalysts through the addition of Au to monometallic &ldquo;parent&rdquo; catalysts via surface redox reactions. The catalysts were characterized using ICP-OES, N2 physisorption, XRD, XPS, HR-TEM, H2-TPR, NH3-TPD, CO2-TPD, and temperature-programmed 18O2 isotopic exchange. The performance of the catalysts was evaluated in DMDS total oxidation. In addition, the stability of a Pt&ndash;Au/Ce&ndash;Al catalyst was investigated through 40 h time onstream. Cu&ndash;Au catalysts were observed to be more active than corresponding Pt&ndash;Au catalysts based on DMDS light-off experiments. However, the reaction led to a higher amount of oxygen-containing byproduct formation, and thus the Pt&ndash;Au catalysts were more selective. H2-TPR showed that the higher redox capacity of the Cu-containing catalysts may have been the reason for better DMDS conversion and lower selectivity. The lower amount of reactive oxygen on the surface of Pt-containing catalysts was beneficial for total oxidation. The improved selectivity of ceria-containing catalysts after the Au addition may have resulted from the lowered amount of reactive oxygen as well. The Au addition improved the activity of Al2O3-supported Cu and Pt. The Au addition also had a positive effect on SO2 production in a higher temperature region. A stability test of 40 h showed that the Pt&ndash;Au/Ce&ndash;Al catalyst, while otherwise promising, was not stable enough, and further development is still needed

    Precipitation behavior of novel 1 GPa ferritic advanced high strength steels

    No full text
    Abstract The precipitation of nanosized carbides in the hot-deformed low-alloy Ti-Mo-V-Nb and Ti-Mo-V- steels during the isothermal dwell at three different temperatures (590 °C, 630 °C, and 680 °C) was investigated. Scanning transmission electron microscopy (STEM) revealed that the formation of regularly and irregularly distributed interphase precipitates (IP) and their orientation relationship with the polygonal ferrite matrix depended strongly on steel chemistry, dwelling time, and temperature. Results also showed that precipitation occurred not only at the austenite/ferrite phase boundary during the phase transformation, but nanosized precipitates also formed within the supersaturated polygonal ferrite grains after the phase transformation. Interpretation of the results suggested that finely dispersed interphase precipitated V(Mo)C carbides, formed rows in which the spacing and the size of the precipitates grew slightly during the isothermal dwell time in the Ti-Mo-V-Nb steel at the temperatures of 680 °C and 630 °C, whereas spherical V(Mo)C carbides formed within the supersaturated ferrite matrix at all temperatures. In the case of the Ti-Mo-V steel, the formation of the interphase precipitated Ti(Mo,V)C carbides occurred only at the highest dwell temperature of 680 °C. No IPs was detected at the other dwell temperatures in this steel, but an irregular carbide distribution consisting mostly of spherical Ti(Mo,V)C carbides was formed within the supersaturated polygonal ferrite matrix
    corecore