Assessment of Biomass Burning Smoke Influence on Environmental Conditions for Multi-Year Tornado Outbreaks by Combining Aerosol-Aware Microphysics and Fire Emission Constraints

We use the WRF system to study the impacts of biomass burning smoke from Central America on several tornado outbreaks occurring in the US during spring. The model is configured with an aerosol-aware microphysics parameterization capable of resolving aerosol-cloud-radiation interactions in a cost-efficient way for numerical weather prediction (NWP) applications. Primary aerosol emissions are included and smoke emissions are constrained using an inverse modeling technique and satellite-based AOD observations. Simulations turning on and off fire emissions reveal smoke presence in all tornado outbreaks being studied and show an increase in aerosol number concentrations due to smoke. However, the likelihood of occurrence and intensification of tornadoes is higher due to smoke only in cases where cloud droplet number concentration in low level clouds increases considerably in a way that modifies the environmental conditions where the tornadoes are formed (shallower cloud bases and higher low-level wind shear). Smoke absorption and vertical extent also play a role, with smoke absorption at cloud-level tending to burn-off clouds and smoke absorption above clouds resulting in an increased capping inversion. Comparing these and WRF-Chem simulations configured with a more complex representation of aerosol size and composition and different optical properties, microphysics and activation schemes, we find similarities in terms of the simulated aerosol optical depths and aerosol impacts on near-storm environments. This provides reliability on the aerosol-aware microphysics scheme as a less computationally expensive alternative to WRFChem for its use in applications such as NWP and cloud-resolving simulations

Current Status of the Insecticide Resistance in Aedes aegypti (Diptera: Culicidae) from Mexico

The mosquito Aedes aegypti (Diptera: Culicidae) is the primary vector of dengue in Mexico and lately virus Chikungunya, although Aedes albopictus is widely distributed; its role in both diseases’ transmission has not been confirmed. The control of mosquitoes in Mexico includes source reduction consisting in the elimination of containers that are favorable sites for oviposition and development of the aquatic stage. The use of insecticides is to control larvae and adulticides as outdoor ultra-low volume applications and indoor residual spray and more recently impregnated materials. The health department regulates the use of insecticides, and such regulations are revised and adapted over time. Since 1999, the vector control regulations gave preference to the use of pyrethroids, a permethrin-based formulation to control adult forms. This insecticide was used as the only adulticide in Mexico for more than 10 years. The consequences of this actions have evolved in a widespread and strong resistance to other insecticides, mainly pyrethroids. We include in this revision evidence of resistance reported in Ae. aegypti in Mexico

Efectividad de repelentes comerciales disponibles contra el mosquito Aedes aegypti (L.) en Yucatán, México

Objetivo. Determinar la eficacia de repelentes comerciales disponibles en Yucatán contra el mosquito Aedes aegypti, vector del dengue, Chikungunya y Zika. Material y métodos. Se determinó el tiempo de protección con base en el protocolo WHO/CTD/WHOPES/IC y la NOM-032- SSA2-2014. Resultados. Sólo el repelente con DEET (N, N-dietil-3-metilbenzamida) al 25% cumplió con la protección recomendada. La eficacia fue directamente proporcional a la concentración del DEET; aquéllos con componentes botánicos fueron poco o nada protectores. Conclusiones. Los resultados muestran que los repelentes con DEET proveen protección contra Ae. Aegypti; los repelentes botánicos, incluyendo las pulseras impregnadas, ofrecen nula protección. ABSTRACT Objective. We assessed the efficacy of commercial repellents available in Yucatan against Aedes aegypti, vector of dengue, Chikungunya and Zika. Materials and methods. Protection time was determined based on WHO/CTD/ WHOPES/IC y la NOM-032-SSA2-2014. Results. Products with DEET (N, N-diethyl-3-methylbenzamide) at 25% met the recommended protection. Efficacy was directly proportional to the concentration of DEET; botanicals repellents resulted no protective. Conclusions. Repellents with DEET provided more protection against Ae. aegypti and botanical repellents, including impregnated wristbands, provided no protection

New record of Aedes Albopictus in a suburban area of Merida, Yucatan, Mexico

Along with Aedes aegypti (L.), Aedes albopictus has been implicated as a secondary vector for dengue virus, chikungunya virus, and Zika virus in Latin America. The article covers an entomological survey in 2018, in a suburban area of Merida (the largest and capital city in Yucatan). This is the first report of Ae. albopictus in a suburban area of Merida City. A total of 259 specimens were collected. It is important to consider the ecology of Ae. albopictus alongside that of Ae. aegypti when developing vector/disease control programs

Cloud adjustments from large-scale smoke-circulation interactions strongly modulate the southeast Atlantic stratocumulus-to-cumulus transition

Smoke from southern Africa blankets the southeast Atlantic Ocean from June&ndash;October, producing strong and competing aerosol radiative effects. Smoke effects on the transition between overcast stratocumulus and scattered cumulus clouds are investigated along a Lagrangian (air-mass-following) trajectory in regional climate and large eddy simulation models. Results are compared with observations from three recent field campaigns that took place in August 2017: ORACLES, CLARIFY, and LASIC. The case study is set up around the joint ORACLES-CLARIFY flight that took place near Ascension Island on 18 August 2017. Smoke sampled upstream on an ORACLES flight on 15 August 2017 likely entrained into the marine boundary layer later sampled during the joint flight. The case is first simulated with the WRF-CAM5 regional climate model in three distinct setups: 1) FireOn, in which smoke emissions and any resulting smoke-cloud-radiation interactions are included; 2) FireOff, in which no smoke emissions are included; and 3) RadOff, in which smoke emissions and their microphysical effects are included but aerosol does not interact directly with radiation. Over the course of the Lagrangian trajectory, differences in free tropospheric thermodynamic properties between FireOn and FireOff are nearly identical to those between FireOn and RadOff, showing that aerosol-radiation interactions are primarily responsible for the free tropospheric effects. These effects are non-intuitive: in addition to the expected heating within the core of the smoke plume, there is also a "banding" effect of cooler temperature (~1&ndash;2 K) and greatly enhanced moisture (&gt;2 g/kg) at plume top. This banding effect is caused by a vertical displacement of the former continental boundary layer in the free troposphere in the FireOn simulation resulting from anomalous diabatic heating due to smoke absorption of sunlight that manifests primarily as a few hundred m per day reduction in large-scale subsidence over the ocean. A large eddy simulation (LES) is then forced with free tropospheric fields taken from the outputs for the WRF-CAM5 FireOn and FireOff runs. Cases are run by selectively perturbing one variable (e.g., aerosol number concentration, temperature, moisture, vertical velocity) at a time to better understand the contributions from different indirect (microphysical), "large-scale" semi-direct (above-cloud thermodynamic and subsidence changes), and "local" semi-direct (below-cloud smoke absorption) effects. Despite a more than five-fold increase in cloud droplet number concentration when including smoke aerosol concentrations, minimal differences in cloud fraction evolution are simulated by the LES when comparing the base case to a perturbed aerosol case with identical thermodynamic and dynamic forcings. A factor-of-two decrease in background free tropospheric aerosol concentrations from the FireOff simulation shifts the cloud evolution from a classical entrainment-driven "deepening-warming" transition to trade cumulus to a precipitation-driven "drizzle-depletion" transition to open cells, however. The thermodynamic and dynamic changes caused by the WRF-simulated large-scale adjustments to smoke diabatic heating strongly influence cloud evolution in terms of both the rate of deepening (especially for changes in the inversion temperature jump and in subsidence) and in cloud fraction on the final day of the simulation (especially for the moisture "banding" effect). Such large-scale semi-direct effects would not have been possible to simulate using a small domain LES model alone.</p

Surface Dimming by the 2013 Rim Fire Simulated by a Sectional Aerosol Model

The Rim Fire of 2013, the third largest area burned by fire recorded in California history, is simulated by a climate model coupled with a size-resolved aerosol model. Modeled aerosol mass, number and particle size distribution are within variability of data obtained from multiple airborne in-situ measurements. Simulations suggest Rim Fire smoke may block 4-6 of sunlight energy reaching the surface, with a dimming efficiency around 120-150 W m(exp -2) per unit aerosol optical depth in the mid-visible at 13:00-15:00 local time. Underestimation of simulated smoke single scattering albedo at mid-visible by 0.04 suggests the model overestimates either the particle size or the absorption due to black carbon. This study shows that exceptional events like the 2013 Rim Fire can be simulated by a climate model with one-degree resolution with overall good skill, though that resolution is still not sufficient to resolve the smoke peak near the source region

Insecticide-Treated House Screens to Reduce Infestations of Dengue Vectors

The public health importance of the endophilic mosquito Aedes aegypti increased dramatically in the recent decade, because it is the vector of dengue, chikungunya, Zika and yellow fever. The use of long-lasting insecticidal nets (LLINs) fixed on doors and windows, as insecticide-treated screening (ITS), is one innovative approach recently evaluated for Aedes control in South Mexico. From 2009 to 2014, cluster-randomised controlled trials were conducted in Acapulco and Merida. Intervention clusters received Aedes-proof houses (‘Casas a prueba de Aedes’) with ITS and were followed up during 2 years. Overall, results showed significant and sustained reductions on indoor adult vector densities in the treated clusters with ITS after 2 years: ca. 50% on the presence (OR ≤ 0.62, P < 0.05) and abundance (IRR ≤ 0.58, P < 0.05). ITS on doors and windows are ‘user-friendly’ tool, with high levels of acceptance, requiring little additional work or behavioural change by householders. Factors that favoured these interventions were (a) house construction, (b) high coverage achieved due to the excellent acceptance by the community and (c) collaboration of the vector control services; and only some operational complaints relating to screen fragility and the installation process. ITS is a housing improvement that should be part of the current paradigms for urban vector-borne disease control

Understanding and improving model representation of aerosol optical properties for a Chinese haze event measured during KORUS-AQ

KORUS-AQ was an international cooperative air quality field study in South Korea that measured local and remote sources of air pollution affecting the Korean Peninsula during May–June 2016. Some of the largest aerosol mass concentrations were measured during a Chinese haze transport event (24 May). Air quality forecasts using the WRF-Chem model with aerosol optical depth (AOD) data assimilation captured AOD during this pollution episode but overpredicted surface particulate matter concentrations in South Korea, especially PM2.5, often by a factor of 2 or larger. Analysis revealed multiple sources of model deficiency related to the calculation of optical properties from aerosol mass that explain these discrepancies. Using in situ observations of aerosol size and composition as inputs to the optical properties calculations showed that using a low-resolution size bin representation (four bins) underestimates the efficiency with which aerosols scatter and absorb light (mass extinction efficiency). Besides using finer-resolution size bins (8–16 bins), it was also necessary to increase the refractive indices and hygroscopicity of select aerosol species within the range of values reported in the literature to achieve better consistency with measured values of the mass extinction efficiency (6.7 m2 g−1 observed average) and light-scattering enhancement factor (f(RH)) due to aerosol hygroscopic growth (2.2 observed average). Furthermore, an evaluation of the optical properties obtained using modeled aerosol properties revealed the inability of sectional and modal aerosol representations in WRF-Chem to properly reproduce the observed size distribution, with the models displaying a much wider accumulation mode. Other model deficiencies included an underestimate of organic aerosol density (1.0 g cm−3 in the model vs. observed average of 1.5 g cm−3) and an overprediction of the fractional contribution of submicron inorganic aerosols other than sulfate, ammonium, nitrate, chloride, and sodium corresponding to mostly dust (17 %–28 % modeled vs. 12 % estimated from observations). These results illustrate the complexity of achieving an accurate model representation of optical properties and provide potential solutions that are relevant to multiple disciplines and applications such as air quality forecasts, health impact assessments, climate projections, solar power forecasts, and aerosol data assimilation

Revealing important nocturnal and day-to-day variations in fire smoke emissions through a multiplatform inversion

We couple airborne, ground-based, and satellite observations; conduct regional simulations; and develop and apply an inversion technique to constrain hourly smoke emissions from the Rim Fire, the third largest observed in California, USA. Emissions constrainedwithmultiplatform data show notable nocturnal enhancements (sometimes over a factor of 20), correlate better with daily burned area data, and are a factor of 2–4 higher than a priori estimates, highlighting the need for improved characterization of diurnal profiles and day-to-day variability when modeling extreme fires. Constraining only with satellite data results in smaller enhancements mainly due to missing retrievals near the emissions source, suggesting that top-down emission estimates for these events could be underestimated and a multi-platform approach is required to resolve them. Predictions driven by emissions constrained with multi-platform data present significant variations in downwind air quality and in aerosol feedback on meteorology, emphasizing the need for improved emissions estimates during exceptional events