Low Temperature Ignition of Biomass

Biomass is an especially reactive fuel. There have been large increases in the transportation and utilisation of biomass fuels over the past 10 years and this has raised concerns over its safe handling and utilisation. Fires, and sometimes explosions, are a risk during all stages of fuel production as well as during the handling and utilisation of the product. This paper presents a method for assessing ignition risk and provides a ranking of relative risk of ignition of biomass fuels. Tests involved single particle measurements, thermal analysis, dust layer and basket ignition tests. In all cases, smouldering combustion was observed, whereby the fuels pyrolyse to produce a black char, which then subsequently ignites. Low temperature pyrolysis kinetics have been utilised to predict ignition delay times at low temperatures. A method for evaluating risk was explored based on the activation energy for pyrolysis and a characteristic temperature from TGA analysis. Here, olive cake, sunflower husk and Miscanthus fall into the high risk category, while the woods, plane, pine, mesquite and red berry juniper, fall into the medium risk category. This method is able to capture the impact of low activation energy for pyrolysis on the increased risk of ignition

Single particle flame-combustion studies on solid biomass fuels

Combustion of solid biomass in large scale power generation has been recognized as a key technology for the transition to a decarbonized electricity sector in the UK by 2050. Much of the near-term forecast capacity is likely to be by the conversion of existing coal-fired pulverized fuel plant (DECC, 2012). In such applications, it will be necessary to ensure that the combustion behaviour of the solid biomass fuels is engineered to match, as far as practical, that of the original plant design. While biomass feedstock characteristics vary considerably, one controllable variable for pulverized fuel is the size of the particles.Useful modelling for adaptation and design of boiler plant can be improved with more detailed measurement of the real behaviour of individual particles of the varying fuels. Typical power plant biomass fuels including pine, eucalyptus and willow with particle sizes ranging from up to 3. mm (Van Loo and Koppejan, 2008) and with differing moisture content and aspect ratios were selected for study. Single particles were supported in a water-cooled cover and then exposed above a flame, simulating biomass combustion in a furnace. Measurements of ignition delay, volatile burning time and char burn-out time were undertaken using high speed image capture. Temperatures of the surrounding environment and near to the particle surface were measured with thermocouples and thermometric imaging. Thermo-gravimetric measurements on separate samples complement the single particle measurements as a means of verifying the demarcation between the different stages of combustion and providing kinetic data.Analysis of the data identified correlations between the biomass fundamental characteristics, particle size, and the observed combustion profiles. Empirical expressions for the duration of each combustion stage have been derived. These have been validated with basic modelling including the predicted devolatilisation stage calculated by the FG-Biomass model (Chen et al.,1998)

Low temperature ignition of biomass

Abstract Biomass is an especially reactive fuel. There have been large increases in the transportation and utilization of biomass fuels over the past 10 years and this has raised concerns over its safe handling and utilization. Fires, and sometimes explosions, are a risk during all stages of fuel production as well as during the handling and utilization of the product. This paper presents a method for assessing ignition risk and provides a ranking of relative risk of ignition of biomass fuels. Tests involved single particle measurements, thermal analysis, dust layer and basket ignition tests. In all cases, smouldering combustion was observed, whereby the fuels pyrolyse to produce a black char, which then subsequently ignites. Low temperature pyrolysis kinetics have been utilised to predict ignition delay times at low temperatures. A method for evaluating risk was explored based on the activation energy for pyrolysis and a characteristic temperature from {TGA} analysis. Here, olive cake, sunflower husk and Miscanthus fall into the high risk category, while the woods, plane, pine, mesquite and red berry juniper, fall into the medium risk category. This method is able to capture the impact of low activation energy for pyrolysis on the increased risk of ignition

High-throughput chemogenetic drug screening reveals PKC-RhoA/PKN as a targetable signaling vulnerability in GNAQ-driven uveal melanoma

Uveal melanoma (UM) is the most prevalent cancer of the eye in adults, driven by activating mutation of GNAQ/GNA11; however, there are limited therapies against UM and metastatic UM (mUM). Here, we perform a high-throughput chemogenetic drug screen in GNAQ-mutant UM contrasted with BRAF-mutant cutaneous melanoma, defining the druggable landscape of these distinct melanoma subtypes. Across all compounds, darovasertib demonstrates the highest preferential activity against UM. Our investigation reveals that darovasertib potently inhibits PKC as well as PKN/PRK, an AGC kinase family that is part of the "dark kinome." We find that downstream of the Gαq-RhoA signaling axis, PKN converges with ROCK to control FAK, a mediator of non-canonical Gαq-driven signaling. Strikingly, darovasertib synergizes with FAK inhibitors to halt UM growth and promote cytotoxic cell death in vitro and in preclinical metastatic mouse models, thus exposing a signaling vulnerability that can be exploited as a multimodal precision therapy against mUM.</p

Interleukin-17D and Nrf2 mediate initial innate immune cell recruitment and restrict MCMV infection.

Innate immune cells quickly infiltrate the site of pathogen entry and not only stave off infection but also initiate antigen presentation and promote adaptive immunity. The recruitment of innate leukocytes has been well studied in the context of extracellular bacterial and fungal infection but less during viral infections. We have recently shown that the understudied cytokine Interleukin (IL)-17D can mediate neutrophil, natural killer (NK) cell and monocyte infiltration in sterile inflammation and cancer. Herein, we show that early immune cell accumulation at the peritoneal site of infection by mouse cytomegalovirus (MCMV) is mediated by IL-17D. Mice deficient in IL-17D or the transcription factor Nuclear factor (erythroid-derived 2)-like 2 (Nrf2), an inducer of IL-17D, featured an early decreased number of innate immune cells at the point of viral entry and were more susceptible to MCMV infection. Interestingly, we were able to artificially induce innate leukocyte infiltration by applying the Nrf2 activator tert-butylhydroquinone (tBHQ), which rendered mice less susceptible to MCMV infection. Our results implicate the Nrf2/IL-17D axis as a sensor of viral infection and suggest therapeutic benefit in boosting this pathway to promote innate antiviral responses

The Use of Agricultural Residues, Wood Briquettes and Logs for Small-Scale Domestic Heating

Large amounts of agricultural residues are produced annually in the UK alone, which presents a significant biomass energy resource. It has limited availability in briquetted form in the UK but is widely used, particularly in Asia. The aim of this work is to assess the emission from briquetted agricultural residues to wood fuel, including commercial wood briquettes, when utilised in a 5 kW domestic heating stove. Other straw-type materials, sugarcane bagasse, Miscanthus, were also investigated. The combustion behaviour depended on the chemical and physical nature of the briquettes. Results indicate that fuel choice is an important consideration for emission reduction. Fuel-N directly correlates to emitted NOx and all the fuels studied had NOx emissions below the EU regulation limit. While agricultural residues can be relatively high in Cl and S, there is evidence of in-situ capture of HCl and SO2 by calcium salts in the fuel ash. Particulate emissions correlate with the volatile matter in the fuel, but also are influenced by the quality/durability of the briquette. The briquettes performed well compared to wood logs, and while there is a fuel-type influence on emissions, it is also clear that briquettes from optimised manufacture can be lower emitting than wood logs

Potential applications of nanotechnology in thermochemical conversion of microalgal biomass

The rapid decrease in fossil reserves has significantly increased the demand of renewable and sustainable energy fuel resources. Fluctuating fuel prices and significant greenhouse gas (GHG) emission levels have been key impediments associated with the production and utilization of nonrenewable fossil fuels. This has resulted in escalating interests to develop new and improve inexpensive carbon neutral energy technologies to meet future demands. Various process options to produce a variety of biofuels including biodiesel, bioethanol, biohydrogen, bio-oil, and biogas have been explored as an alternative to fossil fuels. The renewable, biodegradable, and nontoxic nature of biofuels make them appealing as alternative fuels. Biofuels can be produced from various renewable resources. Among these renewable resources, algae appear to be promising in delivering sustainable energy options. Algae have a high carbon dioxide (CO2) capturing efficiency, rapid growth rate, high biomass productivity, and the ability to grow in non-potable water. For algal biomass, the two main conversion pathways used to produce biofuel include biochemical and thermochemical conversions. Algal biofuel production is, however, challenged with process scalability for high conversion rates and high energy demands for biomass harvesting. This affects the viable achievement of industrial-scale bioprocess conversion under optimum economy. Although algal biofuels have the potential to provide a sustainable fuel for future, active research aimed at improving upstream and downstream technologies is critical. New technologies and improved systems focused on photobioreactor design, cultivation optimization, culture dewatering, and biofuel production are required to minimize the drawbacks associated with existing methods. Nanotechnology has the potential to address some of the upstream and downstream challenges associated with the development of algal biofuels. It can be applied to improve system design, cultivation, dewatering, biomass characterization, and biofuel conversion. This chapter discusses thermochemical conversion of microalgal biomass with recent advances in the application of nanotechnology to enhance the development of biofuels from algae. Nanotechnology has proven to improve the performance of existing technologies used in thermochemical treatment and conversion of biomass. The different bioprocess aspects, such as reactor design and operation, analytical techniques, and experimental validation of kinetic studies, to provide insights into the application of nanotechnology for enhanced algal biofuel production are addressed

Fuel flexible power stations: Utilisation of ash co-products as additives for NOx emissions control

This work investigated the effects of different ash co-products on the combustion of solid fuels, in particular the fuel-nitrogen behaviour: The fuel-ash additive combinations investigated were: Firstly, biomass ashes added to bituminous coals, representative of those used in power stations; Secondly, a low reactivity coal; Thirdly, a high-N biomass (olive cake) was chosen as a high reactivity fuel and studied with a power-station pulverised coal fly ash as an additive. These five solid fuels have a wide fuel ratio FR (i.e. the ratio of fixed carbon to volatile matter content). The ash additives were a pulverised fly ash (PFA) and a furnace bottom ash (FBA) from wood pellet combustion in a UK power station. Fuels (with and without additives) were studied for nitrogen partitioning during (i) devolatilisation and for (ii) NOX formation during combustion, using two different electrically heated drop tube furnaces (DTF) operating at 1373 K. Devolatilisation was also studied via ballistic-heated thermogravimetric analysis (TGA). The extent of impact of additives on volatile yield under devolatilisation conditions was dependent on fuel ratio, high FR has the greatest increase in volatile release when co-feeding the additive. Under devolatilisation conditions, there is a correlation between volatile nitrogen and carbon conversion for all the fuels tested. Thus, additives liberate more volatile-nitrogen from the coals and also deliver enhanced carbon conversion. A mechanism is proposed whereby ultra-fine particles and vapours of reactive compounds from the additives interact with the reacting fuel/char particle and influence N-release during both devolatilisation and char burn-out. The enhanced conversion of fuel-nitrogen to volatile-nitrogen and the reduction of char-nitrogen can lead to reductions of NOX emissions in emissions-controlled furnaces. This approach could assist fuel-flexible power stations in achieving their NOX emission targets

Chronic Viral Infection and Primary Central Nervous System Malignancy

Primary central nervous system (CNS) tumors cause significant morbidity and mortality in both adults and children. While some of the genetic and molecular mechanisms of neuro-oncogenesis are known, much less is known about possible epigenetic contributions to disease pathophysiology. Over the last several decades, chronic viral infections have been associated with a number of human malignancies. In primary CNS malignancies, two families of viruses, namely polyomavirus and herpesvirus, have been detected with varied frequencies in a number of pediatric and adult histological tumor subtypes. However, establishing a link between chronic viral infection and primary CNS malignancy has been an area of considerable controversy, due in part to variations in detection frequencies and methodologies used among researchers. Since a latent viral neurotropism can be seen with a variety of viruses and a widespread seropositivity exists among the population, it has been difficult to establish an association between viral infection and CNS malignancy based on epidemiology alone. While direct evidence of a role of viruses in neuro-oncogenesis in humans is lacking, a more plausible hypothesis of neuro-oncomodulation has been proposed. The overall goals of this review are to summarize the many human investigations that have studied viral infection in primary CNS tumors, discuss potential neuro-oncomodulatory mechanisms of viral-associated CNS disease and propose future research directions to establish a more firm association between chronic viral infections and primary CNS malignancies