Stacking fault-associated polarized surface-emitted photoluminescence from zincblende InGaN/GaN quantum wells

Zincblende InGaN/GaN quantum wells offer a potential improvement to the efficiency of green light emission by removing the strong electric fields present in similar structures. However, a high density of stacking faults may have an impact on the recombination in these systems. In this work, scanning transmission electron microscopy and energy-dispersive x-ray measurements demonstrate that one dimensional nanostructures form due to indium segregation adjacent to stacking faults. In photoluminescence experiments these structures emit visible light which is optically polarised up to 86% at 10K and up to 75% at room temperature. The emission redshifts and broadens as the well width increases from 2nm to 8nm. Photoluminescence excitation measurements indicate that carriers are captured by these structures from the rest of the quantum wells and recombine to emit light polarised along the length of these nanostructures

Problems Associated with Making Mechanical Measurements on Water–Ice at Quasistatic and Dynamic Strain Rates

Space penetrators are a potential method of inserting instrumentation onto ice-covered bodies in the solar system. Part of a study to see whether this is feasible involves numerically simulating impact of the penetrator into ice at impact velocities of a few 100 m/s. In order to do this accurately, it is necessary to have a constitutive model for water ice that is valid at the strain rates and temperatures relevant to impact in the Outer Solar System. This paper reports certain issues and difficulties that arose during a study to obtain this data.We also thank QinetiQ plc for funding through the IRAD programme

Exploring the Feasibility of Service Integration in a Low-Income Setting: A Mixed Methods Investigation into Different Models of Reproductive Health and HIV Care in Swaziland.

Integrating reproductive health (RH) with HIV care is a policy priority in high HIV prevalence settings, despite doubts surrounding its feasibility and varying evidence of effects on health outcomes. The process and outcomes of integrated RH-HIV care were investigated in Swaziland, through a comparative case study of four service models, ranging from fully integrated to fully stand-alone HIV services, selected purposively within one town. A client exit survey (n=602) measured integrated care received and unmet family planning (FP) needs. Descriptive statistics were used to assess the degree of integration per clinic and client demand for services. Logistic regression modelling was used to test the hypothesis that clients at more integrated sites had lower unmet FP needs than clients in a stand-alone site. Qualitative methods included in-depth interviews with clients and providers to explore contextual factors influencing the feasibility of integrated RH-HIV care delivery; data were analysed thematically, combining deductive and inductive approaches. Results demonstrated that clinic models were not as integrated in practice as had been claimed. Fragmentation of HIV care was common. Services accessed per provider were no higher at the more integrated clinics compared to stand-alone models (p>0.05), despite reported demand. While women at more integrated sites received more FP and pregnancy counselling than stand-alone models, they received condoms (a method of choice) less often, and there was no statistical evidence of difference in unmet FP needs by model of care. Multiple contextual factors influenced integration practices, including provider de-skilling within sub-specialist roles; norms of task-oriented routinised HIV care; perceptions of heavy client loads; imbalanced client-provider interactions hindering articulation of RH needs; and provider motivation challenges. Thus, despite institutional support, factors related to the social context of care inhibited provision of fully integrated RH-HIV services in these clinics. Programmes should move beyond simplistic training and equipment provision if integrated care interventions are to be sustained

Pituitary pathology and gene expression in acromegalic cats

© 2019 Endocrine Society. The prevalence of GH-secreting pituitary tumors in domestic cats (Felis catus) is 10-fold greater than in humans. The predominant inhibitory receptors of GH-secreting pituitary tumors are somatostatin receptors (SSTRs) and D2 dopamine receptor (DRD2). The expression of these receptors is associated with the response to somatostatin analog and dopamine agonist treatment in human patients with acromegaly. The aim of this study was to describe pathological features of pituitaries from domestic cats with acromegaly, pituitary receptor expression, and investigate correlates with clinical data, including pituitary volume, time since diagnosis of diabetes, insulin requirement, and serum IGF1 concentration. Loss of reticulin structure was identified in 15 of 21 pituitaries, of which 10 of 15 exhibited acinar hyperplasia. SSTR1, SSTR2, SSTR5, and DRD2 mRNA were identified in the feline pituitary whereas SSTR3 and SSTR4 were not. Expression of SSTR1, SSTR2, and SSTR5 was greater in acromegalic cats compared with controls. A negative correlation was identified between DRD2 mRNA expression and pituitary volume. The loss of DRD2 expression should be investigated as a mechanism allowing the development of larger pituitary tumors

Association between Changes in Muscle Quality with Exercise Training and Changes in Cardiorespiratory Fitness Measures in Individuals with Type 2 Diabetes Mellitus: Results from the HART-D Study

Introduction: Type 2 diabetes mellitus (T2DM) is associated with a reduction in muscle quality. However, there is inadequate empirical evidence to determine whether changes in muscle quality following exercise are associated with improvement in cardiorespiratory fitness (CRF) in individuals with T2DM. The objective of this study was to investigate the association between change in muscle quality following a 9-month intervention of aerobic training (AT), resistance training (RT) or a combination of both (ATRT) and cardiorespiratory fitness (CRF) in individuals with T2DM. Material and Methods A total of 196 participants were randomly assigned to a control, AT, RT, or combined ATRT for a 9-months intervention. The exposure variable was change in muscle quality [(Post: leg muscle strength/leg muscle mass)-[(Pre: leg muscle strength/leg muscle mass)]. Dependent variables were change in CRF measures including absolute and relative VO2peak, and treadmill time to exhaustion (TTE) and estimated metabolic equivalent task (METs). Results Continuous change in muscle quality was independently associated with change in absolute (β = 0.015; p = 0.019) and relative (β = 0.200; p = 0.005) VO2peak, and TTE (β = 0.170; p = 0.043), but not with estimated METs (p > 0.05). A significant trend was observed across tertiles of change in muscle quality for changes in absolute (β = 0.050; p = 0.005) and relative (β = 0.624; p = 0.002) VO2peak following 9 months of exercise training. No such association was observed for change in TTE and estimated METs (p > 0.05). Discussion: The results from this ancillary study suggest that change in muscle quality following exercise training is associated with a greater improvement in CRF in individuals with T2DM. Given the effect RT has on increasing muscle quality, especially as part of a recommended training program (ATRT), individuals with T2DM should incorporate RT into their AT regimens to optimize CRF improvement

High-density information storage in an absolutely defined aperiodic sequence of monodisperse copolyester

Synthesis of a polymer composed of a large discrete number of chemically distinct monomers in an absolutely defined aperiodic sequence remains a challenge in polymer chemistry. The synthesis has largely been limited to oligomers having a limited number of repeating units due to the difficulties associated with the step-by-step addition of individual monomers to achieve high molecular weights. Here we report the copolymers of ??-hydroxy acids, poly(phenyllactic-co-lactic acid) (PcL) built via the cross-convergent method from four dyads of monomers as constituent units. Our proposed method allows scalable synthesis of sequence-defined PcL in a minimal number of coupling steps from reagents in stoichiometric amounts. Digital information can be stored in an aperiodic sequence of PcL, which can be fully retrieved as binary code by mass spectrometry sequencing. The information storage density (bit/Da) of PcL is 50% higher than DNA, and the storage capacity of PcL can also be increased by adjusting the molecular weight (~38???kDa)

Sea level: measuring the bounding surfaces of the ocean

The practical need to understand sea level along the coasts, such as for safe navigation given the spatially variable tides, has resulted in tide gauge observations having the distinction of being some of the longest instrumental ocean records. Archives of these records, along with geological constraints, have allowed us to identify the century-scale rise in global sea level. Additional data sources, particularly satellite altimetry missions, have helped us to better identify the rates and causes of sea level rise and the mechanisms leading to spatial variability in the observed rates. Analysis of all of the data reveals the need for long-term and stable observation systems to assess accurately the regional changes as well as to improve our ability to estimate future changes in sea level. While information from many scientific disciplines is needed to understand sea level change, this paper focuses on contributions from geodesy and the role of the ocean’s bounding surfaces: the sea surface and the Earth’s crust

How to write an ICS/IUGA conference abstract

Contains fulltext : 88292.pdf (publisher's version ) (Closed access)INTRODUCTION: This article aims to condense the lectures and discussions from workshops on good reporting at IUGA Como 2009 and ICS San Francisco 2009, providing practical advice for the novice researcher summarising their data for the first time. CONCLUSIONS: Drafting an abstract can be a time consuming process. Formal guidance, such as CONSORT and STROBE, exists for the kinds of information that should be included regarding almost all designs of clinical trials. Follow the abstract submission rules closely to avoid outright rejection. Plan to highlight the novelty, scientific merit and clinical impact of the work. Try not to overstate the importance of the findings. Do not forget to publish the work in a peer reviewed journal.1 mei 201