On pairwise comparison matrices that can be made consistent by the modification of a few elements

Pairwise comparison matrices are often used in Multi-attribute Decision Making forweighting the attributes or for the evaluation of the alternatives with respect to a criteria. Matrices provided by the decision makers are rarely consistent and it is important to index the degree of inconsistency. In the paper, the minimal number of matrix elements by the modification of which the pairwise comparison matrix can be made consistent is examined. From practical point of view, the modification of 1, 2, or, for larger matrices, 3 elements seems to be relevant. These cases are characterized by using the graph representation of the matrices. Empirical examples illustrate that pairwise comparison matrices that can be made consistent by the modification of a few elements are present in the applications

Oxygen uptake rate (OUR) control strategy for improving avermectin B1a production during fed-batch fermentation on industrial scale (150 m3)

Glucose metabolism plays a crucial role in the process of avermectin B1a biosynthesis. Controlling glucose feeding based on oxygen uptake rate (OUR) was established to improve the efficiency of avermectin B1a  production. The result showed that avermectin B1a production was greatly enhanced by OUR control strategy. In the glucose feeding phase, OUR was maintained at approximate 12 mmol/L/h, which was conducive to avermectin B1a biosynthesis. Using this OUR control strategy, an adequate supply of organic acid precursors produced avermectin B1a 5228 U/mL, which was 22.8% higher than that of the control (batch fermentation, 4256 U/mL) on industrial scale.Key words: Avermectin B1a, glucose feeding, oxygen uptake rate, industrial scale

Observation of Temperature-Induced Crossover to an Orbital-Selective Mott Phase in Ax_{x}Fe2−y_{2-y}Se2_2 (A=K, Rb) Superconductors

In this work, we study the A$_{x}$Fe$_{2-y}$Se$_2$ (A=K, Rb) superconductors using angle-resolved photoemission spectroscopy. In the low temperature state, we observe an orbital-dependent renormalization for the bands near the Fermi level in which the dxy bands are heavily renormliazed compared to the dxz/dyz bands. Upon increasing temperature to above 150K, the system evolves into a state in which the dxy bands have diminished spectral weight while the dxz/dyz bands remain metallic. Combined with theoretical calculations, our observations can be consistently understood as a temperature induced crossover from a metallic state at low temperature to an orbital-selective Mott phase (OSMP) at high temperatures. Furthermore, the fact that the superconducting state of A$_{x}$Fe$_{2-y}$Se$_2$ is near the boundary of such an OSMP constraints the system to have sufficiently strong on-site Coulomb interactions and Hund's coupling, and hence highlight the non-trivial role of electron correlation in this family of iron superconductors

How to Ask Better Questions? A Large-Scale Multi-Domain Dataset for Rewriting Ill-Formed Questions

We present a large-scale dataset for the task of rewriting an ill-formed natural language question to a well-formed one. Our multi-domain question rewriting MQR dataset is constructed from human contributed Stack Exchange question edit histories. The dataset contains 427,719 question pairs which come from 303 domains. We provide human annotations for a subset of the dataset as a quality estimate. When moving from ill-formed to well-formed questions, the question quality improves by an average of 45 points across three aspects. We train sequence-to-sequence neural models on the constructed dataset and obtain an improvement of 13.2% in BLEU-4 over baseline methods built from other data resources. We release the MQR dataset to encourage research on the problem of question rewriting.Comment: AAAI 202

A visible, targeted high-efficiency gene delivery and transfection strategy

<p>Abstract</p> <p>Background</p> <p>To enhance myocardial angiogenic gene expression, a novel gene delivery strategy was tested. Direct intramyocardial injection of an angiogenic gene with microbubbles and insonation were applied in a dog animal model. Dogs received one of the four different treatments in conjunction with either the enhanced green fluorescence protein (EGFP) gene or the hepatocyte growth factor (HGF) gene: gene with microbubbles (MB) and ultrasound (US); gene with US; gene with MB; or the gene alone.</p> <p>Results</p> <p>Distribution of MB and the gene in the myocardium was visualized during the experiment. Compared with the EGFP gene group, an average 14.7-fold enhancement in gene expression was achieved in the EGFP+MB/US group (P < 0.01). Compared with the HGF gene group, an average 10.7-fold enhancement in gene expression was achieved in the HGF+MB/US group (P < 0.01). In addition, capillary density increased from 20.8 ± 3.4/mm2 in the HGF gene group to 146.7 ± 31.4/mm2 in HGF+MB/US group (P < 0.01).</p> <p>Conclusions</p> <p>Thus, direct intramyocardial injection of an angiogenic gene in conjunction with microbubbles plus insonation synergistically enhances angiogenesis. This method offers an observable gene delivery procedure with enhanced expression efficiency of the delivered gene.</p

The Sorption of Sulfamethoxazole by Aliphatic and Aromatic Carbons from Lignocellulose Pyrolysis

Massive biomass waste with lignocellulose components can be used to produce biochar for environmental remediation. However, the impact of lignocellulose pyrolysis on biochar structure in relation to the sorption mechanism of ionizable antibiotics is still poorly understood. In this paper, diverse techniques including thermogravimetric analysis and 13C nuclear magnetic resonance were applied to investigate the properties of biochars as affected by the pyrolysis of cellulose and lignin in feedstock. Cellulose-derived biochars possessed more abundant groups than lignin-derived biochars, suggesting the greater preservation of group for cellulose during the carbonization. Higher sorption of sulfamethoxazole (SMX) was also observed by cellulose-derived biochars owing to hydrogen bond interaction. Sorption affinity gradually declined with the conversion aliphatic to aromatic carbon, whereas the enhanced specific surface area (SSA) subsequently promoted SMX sorption as evidenced by increased SSA-N2 and SSA-CO2 from 350 to 450 °C. The decreased Kd/SSA-N2 values with increasing pH values implied a distinct reduction in sorption per unit area, which could be attributed to enhanced electrostatic repulsion. This work elucidated the role of carbon phases from thermal conversion of lignocellulose on the sorption performance for sulfonamide antibiotics, which will be helpful to the structural design of carbonaceous adsorbents for the removal of ionizable antibiotics

Earthquake-related pelvic crush fracture vs. non-earthquake fracture on digital radiography and MDCT: a comparative study

OBJECTIVE: To determine the features of earthquake-related pelvic crush fractures versus non-earthquake fractures with digital radiography and multidetector row computed tomography. METHODS: One hundred and sixty-seven survivors with pelvic crush fractures in the 2008 Sichuan earthquake were entered in our study as the earthquake-related group (139 underwent digital radiography, 28 underwent multidetector row computed tomography); 70 victims with non-earthquake pelvic fractures were enrolled into this study as the non-earthquake group (54 underwent digital radiography, 16 underwent multidetector row computed tomography). Data were reviewed retrospectively between groups, focusing on anatomic distributions, status of pelvic bone fractures, numbers of pelvic bones involved, and classification of pelvic ring fractures according to the Tile classification system. RESULTS: Pelvic fractures occurred more frequently in the pubis in the earthquake-related group than in the non-earthquake group (135/167, 81% vs. 48/70, 69%). In addition, comminuted fractures were more common in the earthquake-related group than in the non-earthquake group (55/167, 33% vs. 10/70, 14%). Multiple fractures were less common in the earthquake-related group than in the non-earthquake group (81/167, 49% vs. 46/70, 66%). Regarding the classification of pelvic ring fractures, Type C predominantly composed of subtype C3 occurred more frequently (64/167, 38% vs. 12/70, 17%), and Type A was less common in the earthquake-related group than in the non-earthquake group (31/167, 19% vs. 23/70, 32%). All differences were statistically significant (

Earthquake-related pelvic crush fracture vs. non-earthquake fracture on digital radiography and MDCT: a comparative study

OBJECTIVE: To determine the features of earthquake-related pelvic crush fractures versus non-earthquake fractures with digital radiography and multidetector row computed tomography. METHODS: One hundred and sixty-seven survivors with pelvic crush fractures in the 2008 Sichuan earthquake were entered in our study as the earthquake-related group (139 underwent digital radiography, 28 underwent multidetector row computed tomography); 70 victims with non-earthquake pelvic fractures were enrolled into this study as the non-earthquake group (54 underwent digital radiography, 16 underwent multidetector row computed tomography). Data were reviewed retrospectively between groups, focusing on anatomic distributions, status of pelvic bone fractures, numbers of pelvic bones involved, and classification of pelvic ring fractures according to the Tile classification system. RESULTS: Pelvic fractures occurred more frequently in the pubis in the earthquake-related group than in the non-earthquake group (135/167, 81% vs. 48/70, 69%). In addition, comminuted fractures were more common in the earthquake-related group than in the non-earthquake group (55/167, 33% vs. 10/70, 14%). Multiple fractures were less common in the earthquake-related group than in the non-earthquake group (81/167, 49% vs. 46/70, 66%). Regarding the classification of pelvic ring fractures, Type C predominantly composed of subtype C3 occurred more frequently (64/167, 38% vs. 12/70, 17%), and Type A was less common in the earthquake-related group than in the non-earthquake group (31/167, 19% vs. 23/70, 32%). All differences were statistically significant (p<0.05). No difference was found in Type B fractures between the groups (72/167, 43% vs. 35/70, 50%). CONCLUSION: Earthquake-related pelvic crush fractures can be characterized by a high incidence of pelvic fractures occurring in the pubis, comminuted fractures, and Type C fractures predominantly composed by subtype C3, despite a low incidence of multiple fractures