Evolution of a stream ecosystem in recently deglaciated terrain

Climate change and associated glacial recession create new stream habitat that leads to the assembly of new riverine communities through primary succession. However, there are still very few studies of the patterns and processes of community assembly during primary succession for stream ecosystems. We illustrate the rapidity with which biotic communities can colonize and establish in recently formed streams by examining Stonefly Creek in Glacier Bay, Alaska (USA), which began to emerge from a remnant glacial ice mass between 1976 and 1979. By 2002, 57 macroinvertebrate and 27 microcrustacea species had become established. Within 10 years of the stream's formation, pink salmon and Dolly Varden charr colonized, followed by other fish species, including juvenile red and silver salmon, Coast Range sculpin, and sticklebacks. Stable-isotope analyses indicate that marine-derived nitrogen from the decay of salmon carcasses was substantially assimilated within the aquatic food web by 2004. The findings from Stonefly Creek are compared with those from a long-term study of a similarly formed but older stream (12 km to the northeast) to examine possible similarities in macroinvertebrate community and biological trait composition between streams at similar stages of development. Macroinvertebrate community assembly appears to have been initially strongly deterministic owing to low water temperature associated with remnant ice masses. In contrast, microcrustacean community assembly appears to have been more stochastic. However, as stream age and water temperature increased, macroinvertebrate colonization was also more stochastic, and taxonomic similarity between Stonefly Creek and a stream at the same stage of development was,<50%. However the most abundant taxa were similar, and functional diversity of the two communities was almost identical. Tolerance is suggested as the major mechanism of community assembly. The rapidity with which salmonids and invertebrate communities have become established across an entire watershed has implications for the conservation of biodiversity in freshwater habitats

Successive spin-flop transitions of a Neel-type antiferromagnet Li2MnO3 single crystal with a honeycomb lattice

We have carried out high magnetic field studies of single-crystalline Li2MnO3, a honeycomb lattice antiferromagnet. Its magnetic phase diagram was mapped out using magnetization measurements at applied fields up to 35 T. Our results show that it undergoes two successive meta-magnetic transitions around 9 T fields applied perpendicular to the ab plane (along the c* axis). These phase transitions are completely absent in the magnetization measured with the field applied along the ab plane. In order to understand this magnetic phase diagram, we developed a mean-field model starting from the correct Neel-type magnetic structure, consistent with our single crystal neutron diffraction data at zero field. Our model calculations succeeded in explaining the two meta-magnetic transitions that arise when Li2MnO3 enters two different spin-flop phases from the zero field Neel phase.open1187Nsciescopu

Кераміка для техніки

The benthic invertebrates fauna of most of the saline lakes of the Sud Lipez region (Bolivia, Altiplano) has been until now quite unstudied. Samples collected during an extensive survey of 12 lakes and two small inflow rivers allow a first list of the main macroinvertebrates living in the biotopes. The heterogeneous nature of these saline lakes with their freshwater springs and phreatic inflows offers a variety of habitats to macroinvertebrates. The benthic fauna in lakes with salinity > 10 g l-1 is not so low in density but includes few species and is dominated by Orthocladinae and Podonominae larvae. In contrast, the freshwater springs and inflows are colonized by a diverse fauna with a mixture of both freshwater and saline taxa, but dominated by Elmidae and Amphipoda. The lakes are quite isolated and, apart from some cosmopolitan organisms, their fauna can be quite distinctive. (Résumé d'auteur

An economic insight into additive manufacturing system implementation

With an ever growing diffusion of Additive Manufacturing (AM) system in industrial and commercial level, as well as the direct and indirect dynamics which are being introduced resulting from its inclusion as a possible production technology on companies’ portfolio, the need to reconfigure production system and adapt the production strategy becomes even more relevant than before. There are several studies which have emphasized on the importance of a paradigm shift in order to exploit advantages of AM, not only considering changes within design and functionality of the product, but also concerning AM’s impact on the entire value chain (re)configuration. Thus, it is of crucial importance to take into consideration that for this shift to be feasible and manageable, there is a need to include both technical and managerial aspects of manufacturing. This work proposes an economic insight in order to provide a guideline for the proper evaluation of AM system implementation. © IFIP International Federation for Information Processing 2015

Exposure to benzene at work and the risk of leukemia: a systematic review and meta-analysis

Background A substantial number of epidemiologic studies have provided estimates of the relation between exposure to benzene at work and the risk of leukemia, but the results have been heterogeneous. To bridge this gap in knowledge, we synthesized the existing epidemiologic evidence on the relation between occupational exposure to benzene and the risk of leukemia, including all types combined and the four main subgroups acute myeloid leukemia (AML), acute lymphocytic leukemia (ALL), chronic lymphocytic leukemia (CLL), and chronic myeloid leukemia (CML). Methods A systematic literature review was carried out using two databases 'Medline' and 'Embase' from 1950 through to July 2009. We selected articles which provided information that can be used to estimate the relation between benzene exposure and cancer risk (effect size). Results In total 15 studies were identified in the search, providing 16 effect estimates for the main analysis. The summary effect size for any leukemia from the fixed-effects model was 1.40 (95% CI, 1.23-1.57), but the study-specific estimates were strongly heterogeneous (I2 = 56.5%, Q stat = 34.47, p = 0.003). The random-effects model yielded a summary- effect size estimate of 1.72 (95% CI, 1.37-2.17). Effect estimates from 9 studies were based on cumulative exposures. In these studies the risk of leukemia increased with a dose-response pattern with a summary-effect estimate of 1.64 (95% CI, 1.13-2.39) for low (< 40 ppm-years), 1.90 (95% CI, 1.26-2.89) for medium (40-99.9 ppm-years), and 2.62 (95% CI, 1.57-4.39) for high exposure category (> 100 ppm-years). In a meta-regression, the trend was statistically significant (P = 0.015). Use of cumulative exposure eliminated heterogeneity. The risk of AML also increased from low (1.94, 95% CI, 0.95-3.95), medium (2.32, 95% CI, 0.91-5.94) to high exposure category (3.20, 95% CI, 1.09-9.45), but the trend was not statistically significant. Conclusions Our study provides consistent evidence that exposure to benzene at work increases the risk of leukemia with a dose-response pattern. There was some evidence of an increased risk of AML and CLL. The meta-analysis indicated a lack of association between benzene exposure and the risk of CML

Phenotypic microarrays suggest Escherichia coli ST131 is not a metabolically distinct lineage of extra-intestinal pathogenic E. coli

Extraintestinal pathogenic E. coli (ExPEC) are the major aetiological agent of urinary tract infections (UTIs) in humans. The emergence of the CTX-M producing clone E. coli ST131 represents a major challenge to public health worldwide. A recent study on the metabolic potential of E. coli isolates demonstrated an association between the E. coli ST131 clone and enhanced utilisation of a panel of metabolic substrates. The studies presented here investigated the metabolic potential of ST131 and other major ExPEC ST isolates using 120 API test reagents and found that ST131 isolates demonstrated a lower metabolic activity for 5 of 120 biochemical tests in comparison to non-ST131 ExPEC isolates. Furthermore, comparative phenotypic microarray analysis showed a lack of specific metabolic profile for ST131 isolates countering the suggestion that these bacteria are metabolically fitter and therefore more successful human pathogens

Stereotactically guided breast biopsy: a review

The aims of this review are to compare and contrast the available stereotactic equipment, and to describe the variety of needle types used and their affect on pathological results and subsequent patient management. Initial stereotactic devices were “added-on” to analogue mammography units and have been replaced by prone or ducubitus equipment using digital image acquisition. Biopsies use either 14-G core biopsy (CB) needles or vacuum-assisted biopsies (VAB). Vacuum-assisted biopsy systems consistently out-perform 14-G CB with reduced need for diagnostic or multi-treatment surgery. The false-negative rate is 8% for 14-G CB compared with 0.7% for VAB. There is a risk of underestimating the disease present for lesions of uncertain malignant potential (Cat B3) and suspicious of malignancy (Cat B4) results with 25% of patients with a B3 biopsy found to have cancer at subsequent surgery and 66% of those with a B4 biopsy. A CB diagnosis of in situ malignancy is upgraded to invasive disease at surgery in 15-36% of patients undergoing CB and of the order of 10% with VAB. A high degree of diagnostic accuracy and hence safe patient care can only be achieved by meticulous attention to technique and multi-disciplinary cooperation

Hematological Changes in Women and Infants Exposed to an AZT-Containing Regimen for Prevention of Mother-to-child-transmission of HIV in Tanzania.

Tanzanian guidelines for prevention of mother-to-child-transmission of HIV (PMTCT) recommend an antiretroviral combination regimen involving zidovudine (AZT) during pregnancy, single-dosed nevirapine at labor onset, AZT plus Lamivudine (3TC) during delivery, and AZT/3TC for 1-4 weeks postpartum. As drug toxicities are a relevant concern, we assessed hematological alterations in AZT-exposed women and their infants. A cohort of HIV-positive women, either with AZT intake (n = 82, group 1) or without AZT intake (n = 62, group 2) for PMTCT during pregnancy, was established at Kyela District Hospital, Tanzania. The cohort also included the infants of group 1 with an in-utero AZT exposure ≥4 weeks, receiving AZT for 1 week postpartum (n = 41), and infants of group 2 without in-utero AZT exposure, receiving a prolonged 4-week AZT tail (n = 58). Complete blood counts were evaluated during pregnancy, birth, weeks 4-6 and 12. For women of group 1 with antenatal AZT intake, we found a statistically significant decrease in hemoglobin level, red blood cells, white blood cells, granulocytes, as well as an increase in red cell distribution width and platelet count. At delivery, the median red blood cell count was significantly lower and the median platelet count was significantly higher in women of group 1 compared to group 2. At birth, infants from group 1 showed a lower median hemoglobin level and granulocyte count and a higher frequency of anemia and granulocytopenia. At 4-6 weeks postpartum, the mean neutrophil granulocyte count was significantly lower and neutropenia was significantly more frequent in infants of group 2. AZT exposure during pregnancy as well as after birth resulted in significant hematological alterations for women and their newborns, although these changes were mostly mild and transient in nature. Research involving larger cohorts is needed to further analyze the impact of AZT-containing regimens on maternal and infant health

A simple, low-cost conductive composite material for 3D printing of electronic sensors

3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes (‘rapid prototyping’) before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution. The advent of low-cost, desktop 3D printers such as the RepRap and Fab@Home has meant a wider user base are now able to have access to desktop manufacturing platforms enabling them to produce highly customised products for personal use and sale. This uptake in usage has been coupled with a demand for printing technology and materials able to print functional elements such as electronic sensors. Here we present formulation of a simple conductive thermoplastic composite we term ‘carbomorph’ and demonstrate how it can be used in an unmodified low-cost 3D printer to print electronic sensors able to sense mechanical flexing and capacitance changes. We show how this capability can be used to produce custom sensing devices and user interface devices along with printed objects with embedded sensing capability. This advance in low-cost 3D printing with offer a new paradigm in the 3D printing field with printed sensors and electronics embedded inside 3D printed objects in a single build process without requiring complex or expensive materials incorporating additives such as carbon nanotubes