13,672 research outputs found
"Good-but-Imperfect" electromagnetic reverberation in a VIRC
Novel theoretical probability density functions (PDF) of electromagnetic fields inside reverberation chambers operating in a “good-but-imperfect‿ regime have been recently reported. The present work reports on the application and assessment of these PDFs using a non-conventional type of reverberation chamber, namely the Vibrating Intrinsic Reverberation Chamber (VIRC). A vector network analyzer was used in order to measure the complex field components. An electrically short dipole antenna was used as a receiving antenna. Five thousand frequency points were taken ranging from 200MHz (undermoded regime) to 4 GHz (overmoded regime), so one measurement every 760 kHz was performed. For each frequency, 200 samples of the real and imaginary part of the field were measured. Measurements confirm the fact that the novel PDFs are able to describe the occurrence of anomalous statistics in the VIRC
The Bernstein problem for intrinsic graphs in Heisenberg groups and calibrations
In this paper we deal with some problems concerning minimal hypersurfaces in
Carnot-Caratheodory (CC) structures. More precisely we will introduce a general
calibration method in this setting and we will study the Bernstein problem for
entire regular intrinsic minimal graphs in a meaningful and simpler class of CC
spaces, i.e. the Heisenberg group H^n. In particular we will positively answer
to the Bernstein problem in the case n=1 and we will provide counterexamples
when n>=5
Continuous melting through a hexatic phase in confined bilayer water
Liquid water is not only of obvious importance but also extremely intriguing, displaying many anomalies that still challenge our understanding of such an a priori simple system. The same is true when looking at nanoconfined water: The liquid between constituents in a cell is confined to such dimensions, and there is already evidence that such water can behave very differently from its bulk counterpart. A striking finding has been reported from computer simulations for two-dimensionally confined water: The liquid displays continuous or discontinuous melting depending on its density. In order to understand this behavior, we have analyzed the melting exhibited by a bilayer of nanoconfined water by means of molecular dynamics simulations. At high density we observe the continuous melting to be related to the phase change of the oxygens only, with the hydrogens remaining liquidlike throughout. Moreover, we find an intermediate hexatic phase for the oxygens between the liquid and a triangular solid ice phase, following the Kosterlitz-Thouless-Halperin-Nelson-Young theory for two-dimensional melting. The liquid itself tends to maintain the local structure of the triangular ice, with its two layers being strongly correlated yet with very slow exchange of matter. The decoupling in the behavior of the oxygens and hydrogens gives rise to a regime in which the complexity of water seems to disappear, resulting in what resembles a simple monoatomic liquid. This intrinsic tendency of our simulated water may be useful for understanding novel behaviors in other confined and interfacial water systems
Inhomogeneous mechanical losses in micro-oscillators with high reflectivity coating
We characterize the mechanical quality factor of micro-oscillators covered by
a highly reflective coating. We test an approach to the reduction of mechanical
losses, that consists in limiting the size of the coated area to reduce the
strain and the consequent energy loss in this highly dissipative component.
Moreover, a mechanical isolation stage is incorporated in the device. The
results are discussed on the basis of an analysis of homogeneous and
non-homogeneous losses in the device and validated by a set of Finite-Element
models. The contributions of thermoelastic dissipation and coating losses are
separated and the measured quality factors are found in agreement with the
calculated values, while the absence of unmodeled losses confirms that the
isolation element integrated in the device efficiently uncouples the dynamics
of the mirror from the support system. Also the resonant frequencies evaluated
by Finite-Element models are in good agreement with the experimental data, and
allow the estimation of the Young modulus of the coating. The models that we
have developed and validated are important for the design of oscillating
micro-mirrors with high quality factor and, consequently, low thermal noise.
Such devices are useful in general for high sensitivity sensors, and in
particular for experiments of quantum opto-mechanics
The magnetic precursor of L1448-mm: Excitation differences between ion and neutral fluids
Shock modelling predicts an electron density enhancement within the magnetic
precursor of C-shocks. Previous observations of SiO, H13CO+, HN13C and H13CN
toward the young L1448-mm outflow showed an over-excitation of the ion fluid
that was attributed to an electron density enhancement in the precursor. We
re-visit this interpretation and test if it still holds when we consider
different source morphologies and kinetic temperatures for the observed
molecules, and also give some insight on the spatial extent of the electron
density enhancement around L1448-mm.
We estimate the opacities of H13CO+ and HN13C by observing the J=3\to2 lines
of rarer isotopologues to confirm that the emission is optically thin. To model
the excitation of the molecules, we use the large velocity gradient (LVG)
approximation with updated collisional coefficients to i) re- analyse the
observations toward the positions where the over-excitation of H13CO+ has
previously been observed [i.e. toward L1448- mm at offsets (0,0) and (0,-10)],
and ii) to investigate if the electron density enhancement is still required
for the cases of extended and compact emission, and for kinetic temperatures of
up to 400 K. We also report several lines of SiO, HN13C and H13CO+ toward new
positions around this outflow, to investigate the spatial extent of the
over-excitation of the ions in L1448-mm. From the isotopologue observations, we
find that the emission of H13CO+ and HN13C from the precursor is optically thin
if this emission is extended. Using the new collisional coefficients, an
electron density enhancement is still needed to explain the excitation of
H13CO+ for extended emission and for gas temperatures of\le 400 K toward
L1448-mm (0,-10), and possibly also toward L1448-mm (0,0). For compact emission
the data cannot be fitted. We do not find any evidence for the over-excitation
of the ion fluid toward the newly observed positions around L1448-mm.
The observed line emission of SiO, H13CO+ and HN13C toward L1448-mm (0,0) and
(0,-10) is consistent with an electron density enhancement in the precursor
component, if this emission is spatially extended. This is also true for the
case of high gas temperatures (\le400 K) toward the (0,-10) offset. The
electron density enhancement seems to be restricted to the southern, redshifted
lobe of the L1448-mm outflow. Interferometric images of the line emission of
these molecules are needed to confirm the spatial extent of the over-excitation
of the ions and thus, of the electron density enhancement in the magnetic
precursor of L1448-mm.Comment: Accepted for publication in A&A; 9 pages, 3 figure
Detection of weak stochastic force in a parametrically stabilized micro opto-mechanical system
Measuring a weak force is an important task for micro-mechanical systems,
both when using devices as sensitive detectors and, particularly, in
experiments of quantum mechanics. The optimal strategy for resolving a weak
stochastic signal force on a huge background (typically given by thermal noise)
is a crucial and debated topic, and the stability of the mechanical resonance
is a further, related critical issue. We introduce and analyze the parametric
control of the optical spring, that allows to stabilize the resonance and
provides a phase reference for the oscillator motion, yet conserving a free
evolution in one quadrature of the phase space. We also study quantitatively
the characteristics of our micro opto-mechanical system as detector of
stochastic force for short measurement times (for quick, high resolution
monitoring) as well as for the longer term observations that optimize the
sensitivity. We compare a simple, naive strategy based on the evaluation of the
variance of the displacement (that is a widely used technique) with an optimal
Wiener-Kolmogorov data analysis. We show that, thanks to the parametric
stabilization of the effective susceptibility, we can more efficiently
implement Wiener filtering, and we investigate how this strategy improves the
performance of our system. We finally demonstrate the possibility to resolve
stochastic force variations well below 1% of the thermal noise
- …