752 research outputs found
Quantitative detection of _Potato virus Y_ in potato plants and aphids - Discussion of diverse applications in potato research
Every year potato growers worldwide complain about severe yield losses caused by _Potato virus Y_ (PVY). Therefore, PVY along with _Potato leafroll virus_ belongs to the most important potato viruses. There are three main strains of PVY: PVY^O^, PVY^N^ and PVY^C^. However, also recombinant forms exist such as PVY^N^Wilga and PVY^NTN^, both of which increase in importance due to their potential to displace the non-recombinant strains at a high percentage. They appear also in mixed infections. In recent years PCR and qPCR assays were developed to differentiate PVY isolates. In order to identify PVY isolates by PCR often large amplicons have to be generated which requires the input of expensive enzymes. On the other hand, qPCR assays until now do not allow the differentiation between PVY^N^Wilga and PVY^NTN^. 

For the discrimination between PVY^O^/PVY^N^Wilga and PVY^N^/PVY^NTN^ a qPCR assay was developed, which allows the differentiation and highly efficient quantification of both strains and recombinants, respectively. For this purpose dual-labeled hydrolysis probes tagged with different fluorophores were designed. The assay is suitable for many different applications, for example safety research on genetically modified (GM) potato plants. The goal of this research is to determine whether genetic modification causes changes in resistance to viruses. Two different GM cultivars were examined for signs of altered resistance to an infection with PVY in comparison to their near-isogenic lines and three reference cultivars. Reference cultivars are included to determine the baselines for resistance and thus to be able to decide if the changes could represent a biological risk. The plants to be investigated were mechanically inoculated with PVY^N^Wilga or PVY^NTN^ and analyzed by means of the developed assay after two weeks. The results of the experiment indicate that the differences in virus titer between the reference cultivars are higher than between the GM potatoes and their isogenic lines. Therefore, in our experiments the GM potato plants showed no alteration in PVY resistance to neither one of the tested strains.

Since _Myzus persicae_ is one of the most important vectors transmitting PVY, the developed assay will also be applied to the quantification of PVY particles in aphids. The displacement of PVY^O^ and PVY^N^ by PVY^N^Wilga and PVY^NTN^ may be due to a difference in efficiency of transmission by _M. persicae_. Therefore, the objective is to test whether more virus particles of the recombinant forms in comparison to the non-recombinant strains PVY^O^ and PVY^N^ bind in the stylets of _M. persicae_. 

A third possible application of the developed assay may be of interest in potato breeding. The exact quantification of PVY particles in plants allows the classification of resistance in potato plants. It is possible to estimate whether a resistance is extreme or not. Extreme resistance is characterized by the absence or presence of very low amounts of virus particles in plants several days after inoculation. When testing the plants for PVY infection by ELISA, often unspecific reactions occur which makes it difficult to differentiate between plants weakly infected and plants very weakly infected. An exact quantification of the PVY titer gives more certainty for the determination of the resistance type.

In conclusion, the developed assay is an efficient and low-cost method that allows the differentiation and quantification of PVY^O^/PVY^N^Wilga on the one hand and PVY^N^/PVY^NTN^ on the other hand with high throughput. The method can be utilized for a wide range of applications in potato research.

Enhanced oxidation resistance of Ti-rich Mo-Si-B alloys by pack-cementation process
To increase efficiency by higher combustion temperatures of aircraft engines and energy generation, new high temperature materials are inevitable. Mo-Si-B alloys for example satisfy several requirements such as good oxidation and creep resistance. Recently, novel Ti-rich Mo-Si-B alloys have shown an increased creep resistance compared to Ti-free Mo-Si-B alloys by the formation of Ti-silicide precipitates during processing. However, due to the formation of a duplex SiO2 – TiO2 oxide layer, where fast inwards diffusion of oxygen takes place, the oxidation resistance is poor.
In this study we show that oxidation resistance of Mo-Si-B-Ti alloys can be enhanced drastically at temperatures ranging from 800 to 1200°C for several hundreds of hours by pack-cementation application of a borosilica based coating. The Mo-12.5Si-8.5B-27.5Ti (in at.%) substrate was produced by repetitive arc-melting of high-purity metals, Si and B in a high-purity argon atmosphere. After homogenization treatment at 1600°C for 100h slices of this alloy were prepared for pack-cementation. The pack-cementation was done in an atmosphere of high-purity argon at 1000°C for 40h, followed by a conditioning step at 1400°C for 10h in air. The resulting layer consists of an outer borosilica layer followed by an inner MoSi2 and Mo5Si3 layer. To study the oxidation behavior, both isothermal and cyclic oxidation tests were carried out. After an initial mass loss during the first hours of oxidation, a steady state is reached for tests up to 1000 hours. To demonstrate the high stability of the outer borosilicate layer SEM cross-sections were prepared after different times of oxidation
Intensive processing optimization for achieving strong and ductile Al-Mn-Mg-Sc-Zr alloy produced by selective laser melting
Quantitative proteomics identifies biomarkers to distinguish pulmonary from head and neck squamous cell carcinomas by immunohistochemistry
The differentiation between a pulmonary metastasis and a newly developed squamous cell carcinoma of the lung in patients with prior head and neck squamous cell carcinoma (HNSCC) is difficult due to a lack of biomarkers but is crucially important for the prognosis and therapy of the affected patient. By using high-resolution mass spectrometry in combination with stable isotope labelling by amino acids in cell culture, we identified 379 proteins that are differentially expressed in squamous cell carcinomas of the lung and the head and neck. Of those, CAV1, CAV2, LGALS1, LGALS7, CK19, and UGDH were tested by mmunohistochemistry on 194 tissue samples (98 lung and 96 HNSCCs). The combination of CAV1 and LGALS7 was able to distinguish the origin of the squamous cell carcinoma with high accuracy (area under the curve 0.876). This biomarker panel was tested on a cohort of 12 clinically classified lung tumours of unknown origin after HNSCC. Nine of those tumours were immunohistochemically classifiable
Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al
Biomaterials and regenerative technologies used in bone regeneration in the craniomaxillofacial region: Consensus report of group 2 of the 15th European Workshop on Periodontology on Bone Regeneration
Geistlich Pharma A
Current concepts: tissue engineering and regenerative medicine applications in the ankle joint
Tissue engineering and regenerative medicine (TERM) has caused a revolution in present and future trends of medicine and surgery. In different tissues, advanced TERM approaches bring new therapeutic possibilities in either general population as in young patients and high-level athletes, improving restoration of biological functions and rehabilitation. The mainstream components required to obtain a functional regeneration of tissues may include biodegradable scaffolds, drugs or growth factors and different cell types (either autologous or heterologous) that can be cultured in bioreactor systems (in vitro) prior implantation into the patient. Particularly in the ankle, that is subject of many different injuries (e.g. acute, chronic, traumatic, degenerative), there is still no definitive and feasible answer to “conventional” methods. This review aims to provide current concepts of TERM applications to ankle injuries under pre-clinical and/or clinical research applied to skin, tendon, bone and cartilage problems. A particular attention has been given to biomaterials design and scaffolds processing with potential use in osteochondral ankle lesions.The authors acknowledge the Portuguese Foundation for Science and Technology (FCT) through the POCTI and FEDER programmes, including Project OsteoCart (grant no. PTDC/CTM-BPC/115977/2009) for providing funds
- …