112 research outputs found
Preparation of polymeric nanoparticles from pre-formed polymers: part II
Polymeric nanoparticles have been produced by pre-formed polymers using aliphatic polyesters, which have been widely used to incorporate lipophilic drugs. The production of nanoparticles (nanospheres and nanocapsules) by pre-formed polymers can be performed by emulsification-solvent evaporation, solvent replacement, salting out or by emulsification-solvent diffusion. These methods are reviewed and discussed in this article, highlighting the technological parameters that influence the physicochemical characteristics of nanoparticles, such as the solubility of drug, the volume and pH of polymerization, the molecular weight and monomer concentration and the nature and concentration of the surfactant.Nanopartículas poliméricas produzidas a partir de polímeros pré-formados, como os poliésteres alifáticos, têm sido amplamente utilizadas para incorporar, principalmente, princípios ativos lipofílicos. A produção das nanopartículas (nanocápsulas e nanosferas) por polímeros pré-formados pode ser realizada por emulsificação-evaporação do solvente, por deslocamento do solvente, por salting-out ou por emulsificação-difusão do solvente. Estes métodos de produção estão revisados e descritos neste artigo, evidenciando os parâmetros tecnológicos que interferem nas características físico-químicas das nanopartículas, como a solubilidade do princípio ativo, o volume e pH do meio de polimerização, a massa molar e concentração do monômero e a natureza e concentração do tensoativo.101106Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES
Analysis of in vivo absorption of didanosine tablets in male adult dogs by HPLC
AbstractDidanosine is an effective antiviral drug in untreated and antiretroviral therapy-experienced patients with Human Immunodeficiency Virus (HIV). An automated system using on-line solid extraction and High Performance Liquid Chromatography (HPLC) with ultraviolet (UV) detection was developed and validated for pharmacokinetic analysis of didanosine in dog plasma. Modifications were introduced on a previous methodology for simultaneous analysis of antiretroviral drugs in human plasma. Extraction was carried out on C18 cartridges, with high extraction yield as stationary phase, whereas mobile phase consisted of a mixture of 0.02 M potassium phosphate buffer, acetonitrile (KH2PO4: acetonitrile: 96:4, v/v) and 0.5% (w/v) of heptane sulphonic acid. The pH was adjusted to 6.5 with triethylamine. All samples and standard solutions were chromatographed at 28°C. For an isocratic run, the flux was 1.0mL/min, detection was at 250nm and injected volume was 20μL. The method was selective and linear for concentrations between 50 and 5000ng/mL. Drug stability data ranged from 96% to 98%, and limit of quantification was 25ng/mL. Extraction yield was up to 95%. Drug stability in dog plasma was kept frozen at −20°C for one month after three freeze–thaw cycles, and for 24h after processing in the auto sampler. Assay was successfully applied to measure didanosine concentrations in plasma dogs
Technological Aspects of Scalable Processes for the Production of Functional Liposomes for Gene Therapy
Polymers for drug delivery systems formulations
The different carrier systems have shown therapeutic potential for a wide variety of drugs, satisfying multiple requirements, such as prevention of rapid elimination, reducing toxicity, promoting stabilization, optimization of metabolism, drug delivery and defense mechanisms. However, it has been recognized several other challenges associated with the specific release of actives in drug delivery. Therefore, to overcome chemical and biological obstacles, the selection of the polymer used to prepare the transport system is crucial. This paper presents a report on the main natural and synthetic polymers used in the preparation of drug carrier systems in vivo.Os diferentes sistemas de transporte têm evidenciado potencial terapêutico para uma grande variedade de princípios ativos, satisfazendo vários requisitos, como a prevenção da sua eliminação rápida do organismo, a redução da sua toxicidade sistêmica, a estabilização e a otimização do seu metabolismo, e o direcionamento específico ao local alvo e os mecanismos de defesa. No entanto, têm sido reconhecidos vários outros desafios associados à liberação específica do princípio ativo ao local alvo, pelo que, para ultrapassar os obstáculos químicos e biológicos, a seleção do polímero utilizado para a preparação do sistema de transporte é de importância crucial. O presente trabalho apresenta um relato sobre os principais polímeros naturais e sintéticos utilizados para a preparação de sistemas de transporte de princípios ativos in vivo.361368Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES
Biodegradable synthetic polymers: raw-materials and production methods of microparticles for drug delivery and controlled release
Micropartículas produzidas a partir de polímeros sintéticos têm sido amplamente utilizadas na área farmacêutica para encapsulação de princípios ativos. Essas micropartículas apresentam as vantagens de proteção do princípio ativo, mucoadesão e gastrorresistência, melhor biodisponibilidade e maior adesão do paciente ao tratamento. Além disso, utiliza menores quantidade de princípio ativo para obtenção do efeito terapêutico proporcionando diminuição dos efeitos adversos locais, sistêmicos e menor toxidade. Os polímeros sintéticos empregados na produção das micropartículas são classificados biodegradáveis ou não biodegradáveis, sendo os biodegradáveis mais utilizados por não necessitam ser removidos cirurgicamente após o término de sua ação. A produção das micropartículas poliméricas sintéticas para encapsulação tanto de ativos hidrofílicos quanto hidrofóbicos pode ser emulsificação por extração e/ou evaporação do solvente; coacervação; métodos mecânicos e estão revisados neste artigo evidenciando as vantagens, desvantagens e viabilidade de cada metodologia. A escolha da metodologia e do polímero sintético a serem empregados na produção desse sistema dependem da aplicação terapêutica requerida, bem como a simplicidade, reprodutibilidade e factibilidade do aumento de escala da produção.Microparticles produced from synthetic polymers have been widely used in the pharmaceutical field for encapsulation of drugs. These microparticles show several advantages such as drug protection, mucoadhesion, gastro-resistance, improved bioavailability and increased patient's compliance. In addition, it is possible to use lower amount of drug to achieve therapeutic efficiency with reduced local/systemic adverse side effects and low toxicity. Synthetic polymers used for the production of microparticles are classified as biodegradable or non-biodegradable, being the former more popular since these do not need to be removed after drug release. Production of polymeric microparticles can be used for encapsulation of hydrophilic and hydrophobic drugs, by emulsification following solvent extraction/evaporation, coacervation, methods that are revised in this paper, including advantages, disadvantages and viability of each methodology. Selection of methodology and synthetic polymer depends of the therapeutic purpose, as well as simplicity, reproducibility and possibility to scale up
Current State-of-Art and New Trends on Lipid Nanoparticles (SLN and NLC) for Oral Drug Delivery
Lipids and lipid nanoparticles are extensively employed as oral-delivery systems for drugs and other active ingredients. These have been exploited for many features in the field of pharmaceutical technology. Lipids usually enhance drug absorption in the gastrointestinal tract (GIT), and when formulated as nanoparticles, these molecules improve mucosal adhesion due to small particle size and increasing their GIT residence time. In addition, lipid nanoparticles may also protect the loaded drugs from chemical and enzymatic degradation and gradually release drug molecules from the lipid matrix into blood, resulting in improved therapeutic profiles compared to free drug. Therefore, due to their physiological and biodegradable properties, lipid molecules may decrease adverse side effects and chronic toxicity of the drug-delivery systems when compared to other of polymeric nature. This paper highlights the importance of lipid nanoparticles to modify the release profile and the pharmacokinetic parameters of drugs when administrated through oral route
Desenvolvimento, produção e caracterização de nanocristais de fármacos pouco solúveis
Poorly soluble drugs have low bioavailability, representing a major challenge for the pharmaceutical industry. Processing drugs into the nanosized range changes their physical properties, and these are being used in pharmaceutics to develop innovative formulations known as Nanocrystals. Use of nanocrystals to overcome the problem of low bioavailability, and their production using different techniques such as microfluidization or high pressure homogenization, was reviewed in this paper. Examples of drugs, cosmetics and nutraceutical ingredients were also discussed. These technologies are well established in the pharmaceutical industry and are approved by the Food and Drug Administration
Circumstances and factors associated with accidental deaths among children, adolescents and young adults in Cuiaba, Brazil
Mucopolysaccharidosis I, II, and VI: Brief review and guidelines for treatment
Mucopolysaccharidoses (MPS) are rare genetic diseases caused by the deficiency of one of the lysosomal enzymes involved in the glycosaminoglycan (GAG) breakdown pathway. This metabolic block leads to the accumulation of GAG in various organs and tissues of the affected patients, resulting in a multisystemic clinical picture, sometimes including cognitive impairment. Until the beginning of the XXI century, treatment was mainly supportive. Bone marrow transplantation improved the natural course of the disease in some types of MPS, but the morbidity and mortality restricted its use to selected cases. The identification of the genes involved, the new molecular biology tools and the availability of animal models made it possible to develop specific enzyme replacement therapies (ERT) for these diseases. At present, a great number of Brazilian medical centers from all regions of the country have experience with ERT for MPS I, II, and VI, acquired not only through patient treatment but also in clinical trials. Taking the three types of MPS together, over 200 patients have been treated with ERT in our country. This document summarizes the experience of the professionals involved, along with the data available in the international literature, bringing together and harmonizing the information available on the management of these severe and progressive diseases, thus disclosing new prospects for Brazilian patients affected by these conditions
- …