Charged pions from Ni on Ni collisions between 1 and 2 AGeV

Charged pions from Ni + Ni reactions at 1.05, 1.45 and 1.93 AGeV are measured with the FOPI detector. The mean $\pi^{\pm}$ multiplicities per mean number of participants increase with beam energy, in accordance with earlier studies of the Ar + KCl and La + La systems. The pion kinetic energy spectra have concave shape and are fitted by the superposition of two Boltzmann distributions with different temperatures. These apparent temperatures depend only weakly on bombarding energy. The pion angular distributions show a forward/backward enhancement at all energies, but not the $\Theta = 90^0$ enhancement which was observed in case of the Au + Au system. These features also determine the rapidity distributions which are therefore in disagreement with the hypothesis of one thermal source. The importance of the Coulomb interaction and of the pion rescattering by spectator matter in producing these phenomena is discussed.Comment: 22 pages, Latex using documentstyle[12pt,a4,epsfig], to appear in Z. Phys.

A Minimal Model of Metabolism Based Chemotaxis

Since the pioneering work by Julius Adler in the 1960's, bacterial chemotaxis has been predominantly studied as metabolism-independent. All available simulation models of bacterial chemotaxis endorse this assumption. Recent studies have shown, however, that many metabolism-dependent chemotactic patterns occur in bacteria. We hereby present the simplest artificial protocell model capable of performing metabolism-based chemotaxis. The model serves as a proof of concept to show how even the simplest metabolism can sustain chemotactic patterns of varying sophistication. It also reproduces a set of phenomena that have recently attracted attention on bacterial chemotaxis and provides insights about alternative mechanisms that could instantiate them. We conclude that relaxing the metabolism-independent assumption provides important theoretical advances, forces us to rethink some established pre-conceptions and may help us better understand unexplored and poorly understood aspects of bacterial chemotaxis

Broken rotational symmetry in the pseudogap phase of a high-Tc superconductor

The nature of the pseudogap phase is a central problem in the quest to understand high-Tc cuprate superconductors. A fundamental question is what symmetries are broken when that phase sets in below a temperature T*. There is evidence from both polarized neutron diffraction and polar Kerr effect measurements that time- reversal symmetry is broken, but at temperatures that differ significantly. Broken rotational symmetry was detected by both resistivity and inelastic neutron scattering at low doping and by scanning tunnelling spectroscopy at low temperature, but with no clear connection to T*. Here we report the observation of a large in-plane anisotropy of the Nernst effect in YBa2Cu3Oy that sets in precisely at T*, throughout the doping phase diagram. We show that the CuO chains of the orthorhombic lattice are not responsible for this anisotropy, which is therefore an intrinsic property of the CuO2 planes. We conclude that the pseudogap phase is an electronic state which strongly breaks four-fold rotational symmetry. This narrows the range of possible states considerably, pointing to stripe or nematic orders.Comment: Published version. Journal reference and DOI adde

Hour-glass magnetic spectrum in an insulating, hole-doped antiferromagnet

Superconductivity in layered copper-oxide compounds emerges when charge carriers are added to antiferromagnetically-ordered CuO2 layers. The carriers destroy the antiferromagnetic order, but strong spin fluctuations persist throughout the superconducting phase and are intimately linked to super-conductivity. Neutron scattering measurements of spin fluctuations in hole-doped copper oxides have revealed an unusual `hour-glass' feature in the momentum-resolved magnetic spectrum, present in a wide range of superconducting and non-superconducting materials. There is no widely-accepted explanation for this feature. One possibility is that it derives from a pattern of alternating spin and charge stripes, an idea supported by measurements on stripe-ordered La1.875Ba0.125CuO4. However, many copper oxides without stripe order also exhibit an hour-glass spectrum$. Here we report the observation of an hour-glass magnetic spectrum in a hole-doped antiferromagnet from outside the family of superconducting copper oxides. Our system has stripe correlations and is an insulator, which means its magnetic dynamics can conclusively be ascribed to stripes. The results provide compelling evidence that the hour-glass spectrum in the copper-oxide superconductors arises from fluctuating stripes.Comment: 13 pages, 4 figures, to appear in Natur

Electron-Spin Excitation Coupling in an Electron Doped Copper Oxide Superconductor

High-temperature (high-Tc) superconductivity in the copper oxides arises from electron or hole doping of their antiferromagnetic (AF) insulating parent compounds. The evolution of the AF phase with doping and its spatial coexistence with superconductivity are governed by the nature of charge and spin correlations and provide clues to the mechanism of high-Tc superconductivity. Here we use a combined neutron scattering and scanning tunneling spectroscopy (STS) to study the Tc evolution of electron-doped superconducting Pr0.88LaCe0.12CuO4-delta obtained through the oxygen annealing process. We find that spin excitations detected by neutron scattering have two distinct modes that evolve with Tc in a remarkably similar fashion to the electron tunneling modes in STS. These results demonstrate that antiferromagnetism and superconductivity compete locally and coexist spatially on nanometer length scales, and the dominant electron-boson coupling at low energies originates from the electron-spin excitations.Comment: 30 pages, 12 figures, supplementary information include

Alkaline activation of ceramic waste materials

Ceramic materials represent around 45 % of construction and demolition waste, and originate not only from the building process, but also as rejected bricks and tiles from industry. Despite the fact that these wastes are mostly used as road sub-base or construction backfill materials, they can also be employed as supplementary cementitious materials, or even as raw material for alkali-activated binders This research aimed to investigate the properties and microstructure of alkali-activated cement pastes and mortars produced from ceramic waste materials of various origins. Sodium hydroxide and sodium silicate were used to prepare the activating solution. The compressive strength of the developed mortars ranged between 22 and 41 MPa after 7 days of curing at 65 C, depending on the sodium concentration in the solution and the water/binder ratio. These results demonstrate the possibility of using alkaliactivated ceramic materials in building applications.The authors are grateful to the Spanish Ministry of Science and Innovation for supporting this study through Project GEOCEDEM BIA 2011-26947, and also to FEDER funding. They also thank Universitat Jaume I for supporting this research through Lucia Reig's granted research stay.Reig Cerdá, L.; Mitsuuchi Tashima, M.; Soriano, L.; Borrachero Rosado, MV.; Monzó Balbuena, JM.; Paya Bernabeu, JJ. (2013). Alkaline activation of ceramic waste materials. Waste and Biomass Valorization. 4:729-736. https://doi.org/10.1007/s12649-013-9197-zS7297364Puertas, F., García-Díaz, I., Barba, A., Gazulla, M.F., Palacios, M., Gómez, M.P., Martínez-Ramírez, S.: Ceramic wastes as alternative raw materials for Portland cement clinker production. Cement Concrete Comp. 30(9), 798–805 (2008)Ministerio de Fomento de España, Catálogo de Residuos Utilizables en Construcción (2010). http://www.cedexmateriales.vsf.es/view/catalogo.aspx . Retrieved on 6 Dec 2012Stock, D.: World production and consumption of ceramic tiles. Tile Today 73, 50–58 (2011)Medina, C., Juan, A., Frías, M., Sánchez-de-Rojas, M.I., Morán, J.M., Guerra, M.I.: Characterization of concrete made with recycled aggregate from ceramic sanitary ware. Mater. Construcc. 61(304), 533–546 (2011)Pacheco-Torgal, F., Jalali, S.: Reusing ceramic wastes in concrete. Constr. Build. Mater. 24(5), 832–838 (2010)Lavat, A.E., Trezza, M.A., Poggi, M.: Characterization of ceramic roof tile wastes as pozzolanic admixture. Waste Manage. 29(5), 1666–1674 (2009)Nuran, A., Mevlut, U.: The use of waste ceramic tile in cement production. Cement Concrete Res. 30, 497–499 (2000)Pereira-de-Oliveira, L.A., Castro-Gomes, J.P., Santos, P.M.S.: The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components. Constr. Build. Mater. 31, 197–203 (2012)Van Deventer, J.S.J., Provis, J.L., Duxson, P., Brice, D.G.: Chemical research and climate change as drivers in the commercial adoption of alkali activated materials. Waste Biomass Valor. 1, 145–155 (2010)van Deventer, J.S.J., Provis, J.L., Duxson, P., Lukey, G.C.: Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products. J. Hazard. Mater. A139, 506–513 (2007)Duxson, P., Fernández-Jiménez, A., Provis, J.L., Lukey, G.C., Palomo, A., van Deventer, J.S.J.: Geopolymer technology: the current state of the art. J. Mater. Sci. 42(9), 2917–2993 (2007)Bernal, S.A., Rodríguez, E.D., de Gutiérrez, R.M., Provis, J.L., Delvasto, S.: Activation of metakaolin/slag blends using alkaline solutions based on chemically modified silica fume and rice husk ash. Waste Biomass Valor. 3, 99–108 (2012)Fernández-Jiménez, A., Palomo, A., Criado, M.: Microstructure development of alkali-activated fly ash cement: a descriptive model. Cement Concrete Res 35, 1204–1209 (2005)Payá, J., Borrachero, M.V., Monzó, J., Soriano, L., Tashima, M.M.: A new geopolymeric binder from hydrated-carbonated cement. Mater. Lett. 74, 223–225 (2012)Kourti, I., Amutha-Rani, D., Deegan, D., Boccaccini, A.R., Cheeseman, C.R.: Production of geopolymers using glass produced from DC plasma treatment of air pollution control (APC) residues. J. Hazard. Mater. 176, 704–709 (2010)Puertas, F., Barba, A., Gazulla, M.F., Gómez, M.P., Palacios, M., Martínez-Ramírez, S.: Residuos cerámicos para su posible uso como materia prima en la fabricación de clínker de cemento Portland: caracterización y activación alcalina. Mater. Construcc. 56(281), 73–84 (2006)Reig, L., Tashima, M.M., Borrachero, M.V., Monzó, J., Payá, J.: Nuevas matrices cementantes generadas por Activación Alcalina de residuos cerámicos. II Simposio Aprovechamiento de residuos agro-industriales como fuente sostenible de materiales de construcción, November 8–9, Valencia, Spain, pp. 199–207 (2010)L. Reig, M.M. Tashima, M.V. Borrachero, J. Monzó, J. Payá: Residuos de ladrillos cerámicos en la producción de conglomerantes activados alcalinamente, I Pro-Africa Conference: Non-conventional Building Materials Based on Agroindustrial Wastes, October 18–19, Pirassununga, SP, Brazil, pp. 18–21 (2010)García Ten F.J. Descomposición durante la cocción del carbonato cálcico contenido en el soporte crudo de los azulejos. Tesis de doctorado, Departamento de Ingeniería química, UJI (2005)Baronio, G., Binda, L.: Study of the pozzolanicity of some bricks and clays. Constr. Build. Mater. 11(1), 41–46 (1997)Zanelli, C., Raimondo, M., Guarini, G., Dondi, M.: The vitreous phase of porcelain stoneware: composition, evolution during sintering and physical properties. J. Non-Cryst. Solids 357, 3251–3260 (2011)Carty, W.M., Senapati, U.: Porcelain-raw materials, processing, phase evolution, and mechanical behaviour. J. Am. Ceram. Soc. 81(1), 3–20 (1998)ASCER, COACV, COPUT, ITC-AICE, WEBER ET BROUTIN – CEMARKSA: Guía Baldosa Guía de la baldosa cerámica. IVE: Conselleria d’Obres Públiques, Urbanisme i Transports, 4ª Ed. Valencia (2003)Khater, H.M.: Effect of calcium on geopolimerization of aluminosilicate wastes. J. Mater. Civ. Eng. 24, 92–101 (2012)Bondar, D., Lynsdale, C.J., Milestone, N.B., Hassani, N., Ramezanianpour, A.A.: Effect of adding mineral additives to alkali-activated natural pozzolan paste. Constr. Build. Mater. 25, 2906–2910 (2011)Provis, J.L., Harrex, R.M., Bernal, A.S., Duxson, P., van Deventer, J.S.J.: Dilatometry of geopolymers as a means of selecting desirable fly ash sources. J. Non-Cryst. Solids 358, 1930–1937 (2012)Duxson, P., Provis, J.L., Lukey, G.C., Mallicoat, S.W., Kriven, W.M., van Deventer, J.S.J.: Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Colloid Surf. A 269, 47–58 (2005)Tashima, M.M., Akasaki, J.L., Castaldelli, V.N., Soriano, L., Monzó, J., Payá, J., Borrachero, M.V.: New geopolymeric binder based on fluid catalytic cracking catalyst residue (FCC). Mater. Lett. 80, 50–52 (2012)Komnitsas, K., Zaharaki, D., Perdikatsis, V.: Geopolymerisation of low calcium ferronickel slags. J. Mater. Sci. 42, 3073–3082 (2007)Bernal, S.A., Gutierrez, R.M., Provis, J.L., Rose, V.: Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags. Cement Concrete Res. 40, 898–907 (2010)Tashima, M.M. Produccion y caracterizacion de materiales cementantes a partir del silicoaluminato calcico vitreo (VCAS). Tesis de doctorado, Departamento de Ingeniería de la construcción y de proyectos de ingeniería civil, UPV (2012)Provis, J.L., van Deventer, J.S.J.: Geopolymerisation kinetics. 2. Reaction kinetic modelling. Chem. Eng. Sci. 62, 2318–2329 (2007

Coevolved mutations reveal distinct architectures for two core proteins in the bacterial flagellar motor

Switching of bacterial flagellar rotation is caused by large domain movements of the FliG protein triggered by binding of the signal protein CheY to FliM. FliG and FliM form adjacent multi-subunit arrays within the basal body C-ring. The movements alter the interaction of the FliG C-terminal (FliGC) "torque" helix with the stator complexes. Atomic models based on the Salmonella entrovar C-ring electron microscopy reconstruction have implications for switching, but lack consensus on the relative locations of the FliG armadillo (ARM) domains (amino-terminal (FliGN), middle (FliGM) and FliGC) as well as changes during chemotaxis. The generality of the Salmonella model is challenged by the variation in motor morphology and response between species. We studied coevolved residue mutations to determine the unifying elements of switch architecture. Residue interactions, measured by their coevolution, were formalized as a network, guided by structural data. Our measurements reveal a common design with dedicated switch and motor modules. The FliM middle domain (FliMM) has extensive connectivity most simply explained by conserved intra and inter-subunit contacts. In contrast, FliG has patchy, complex architecture. Conserved structural motifs form interacting nodes in the coevolution network that wire FliMM to the FliGC C-terminal, four-helix motor module (C3-6). FliG C3-6 coevolution is organized around the torque helix, differently from other ARM domains. The nodes form separated, surface-proximal patches that are targeted by deleterious mutations as in other allosteric systems. The dominant node is formed by the EHPQ motif at the FliMMFliGM contact interface and adjacent helix residues at a central location within FliGM. The node interacts with nodes in the N-terminal FliGc α-helix triad (ARM-C) and FliGN. ARM-C, separated from C3-6 by the MFVF motif, has poor intra-network connectivity consistent with its variable orientation revealed by structural data. ARM-C could be the convertor element that provides mechanistic and species diversity.JK was supported by Medical Research Council grant U117581331. SK was supported by seed funds from Lahore University of Managment Sciences (LUMS) and the Molecular Biology Consortium

Prognostic value of physicians' assessment of compliance regarding all-cause mortality in patients with type 2 diabetes: primary care follow-up study

BACKGROUND: Whether the primary care physician's assessment of patient compliance is a valuable prognostic marker to identify patients who are at increased risk of death, or merely reflects measurement of various treatment parameters such as HbA(1C )or other laboratory markers is unclear. The objective of this prospective cohort study was to investigate the prognostic value of the physicians' assessment of patient compliance and other factors with respect to all-cause mortality during a one year follow-up period. METHODS: A prospective cohort study was conducted among 1014 patients with type 2 diabetes aged 40 and over (mean age 69 years, SD 10.4, 45% male) who were under medical treatment in 11 participating practices of family physicians and internists working in primary care in a defined region in South Germany between April and June 2000. Baseline data were gathered from patients and physicians by standardized questionnaire. The physician's assessment of patient compliance was assessed by means of a 4-point Likert scale (very good, rather good, rather bad, very bad). In addition, we carried out a survey among physicians by means of a questionnaire to find out which aspects for the assessment of patient compliance were of importance to make this assessment. Active follow-up of patients was conducted after one year to determine mortality. RESULTS: During the one year follow-up 48 (4.7%) of the 1014 patients died. Among other factors such as patient type (patients presenting at office, nursing home or visited patients), gender, age and a history of macrovascular disease, the physician's assessment of patient compliance was an important predictor of all-cause mortality. Patients whose compliance was assessed by the physician as "very bad" (6%) were significantly more likely to die during follow-up (OR = 2.67, 95% CI 1.02–6.97) after multivariable adjustment compared to patients whose compliance was assessed as "rather good" (45%) or "very good" (18%). The HbA(1C)-value and the cholesterol level at baseline showed no statistically significant association with all-cause mortality. According to our survey for most of the physicians self-acceptance of disease, treatment adherence, patient's interest in physician's explanations, attendance at appointments, a good self-management, and a good physician-patient relationship were key elements in the assessment of patient compliance. CONCLUSION: The primary care physician's assessment of patient compliance is a valuable prognostic marker for mortality among patients with type 2 diabetes. Identification of patients in need of improved compliance may help to target preventive measures