Finite element simulation of plates under non-uniform blast loads using a point-load method: Buried explosives

There are two primary challenges associated with assessing the adequacy of a protective structure to resist explosive events: firstly the spatial variation of load acting on a target must be predicted to a sufficient level of accuracy; secondly, the response of the target to this load must also be quantified. When a high explosive is shallowly buried in soil, the added confinement given by the geotechnical material results in a blast which is predominantly directed vertically. This imparts an extremely high magnitude, spatially non-uniform load on the target structure. A recently commissioned experimental rig designed by the authors has enabled direct measurements of the blast load resulting from buried explosive events. These direct measurements have been processed using an in-house interpolation routine which evaluates the load acting over a regular grid of points. These loads can then be applied as the nodal-point loads in a finite element model. This paper presents results from a series of experiments where a free-flying plate was suspended above a shallow buried explosive. Dynamic and residual deformations are compared with finite element simulations of plates using the experimentally recorded, and interpolated, nodal point-loads. The results show very good agreement and highlight the use of this method for evaluating the efficacy of targets subjected to non-uniform blast loads

Vulnerable Marine Ecosystems Dominated by Deep-Water Corals and Sponges in the NAFO Convention Area

Many species of deep-water corals and sponges are important structure forming species in deep-sea environments, however not all coral and sponges meet the criteria associated with vulnerability. Here we review the taxa living within the NAFO regulatory area (NRA) and provide literature supporting their consideration as components of vulnerable marine ecosystems (VMEs). For the sponges, we present the first map of their location in the NRA, as determined from fisheries bycatch information

Experimentation and modelling of near field explosions

Repeatable experimental results and numerical work has shown that using the Jones-Wilkins-Lee (JWL) equation of state (EOS) will give very accurate results of peak pressures and impulse delivered to a rigid target at large scaled distances. However, recent experiments/numerical modelling at small scaled distances show that the JWL will overpredict peak pressures and impulse due to the assumption of (near) instantaneous energy release from detonation. The results of this experimental/numerical study are presented herein. In the experimental work PE4 spheres at two different scaled distances have been tested using an array of Hopkinson Pressure Bars (HPB) at specific points on a rigid target to measure the local pressure-time histories. From the HPB measurements, it appears that below certain scaled distances there are chemical-physical mechanisms that do not have sufficient time to contribute to the energy driving the loading mechanisms, explaining the over-prediction of the JWL. Importantly though, the experimental results show that at very small scaled distances (0.172 m/kg1/3) the test to test percentage variation is very low (5.1%); whilst at larger scaled distances (0.819 m/kg1/3) it is much higher (23.1%). This paper presents a model which describes the process by which experimental results move from repeatable to variable to repeatable as scaled distance increases from the extreme near field to far field

Blast Quantification Using Hopkinson Pressure Bars

Near-field blast load measurement presents an issue to many sensor types as they must endure very aggressive environments and be able to measure pressures up to many hundreds of megapascals. In this respect the simplicity of the Hopkinson pressure bar has a major advantage in that while the measurement end of the Hopkinson bar can endure and be exposed to harsh conditions, the strain gauge mounted to the bar can be affixed some distance away. This allows protective housings to be utilized which protect the strain gauge but do not interfere with the measurement acquisition. The use of an array of pressure bars allows the pressure-time histories at discrete known points to be measured. This article also describes the interpolation routine used to derive pressure-time histories at un-instrumented locations on the plane of interest. Currently the technique has been used to measure loading from high explosives in free air and buried shallowly in various soils

The impact of deep-sea fisheries and implementation of the UNGA Resolutions 61/105 and 64/72. Report of an international scientific workshop

The scientific workshop to review fisheries management, held in Lisbon in May 2011, brought together 22 scientists and fisheries experts from around the world to consider the United Nations General Assembly (UNGA) resolutions on high seas bottom fisheries: what progress has been made and what the outstanding issues are. This report summarises the workshop conclusions, identifying examples of good practice and making recommendations in areas where it was agreed that the current management measures fall short of their target

Methodology: Systematic Review and Meta-analysis of the AAC Literature for People with Autism Spectrum Disorder or Intellectual Disabilities who have Complex Communication Needs through 2020

A comprehensive meta-analysis examining the impacts of augmentative and alternative communication for individuals with complex communication needs was conducted, examining the relationship between social-communicative and educational outcomes and use of augmentative and alternative communication devices and across potential moderating variables. This document reports the methodology of the project as a whole, describing overarching procedures. Given the comprehensiveness of the review and meta-analysis, results of this review are reported in digestible groupings of types of research designs, types of research questions, and moderator groupings. Each of the resulting papers cite this primary document, as do additional reviews derived from the assembled data set. The documents herewith report the overarching methodology of the project, including the following. The document searches occurred in 2018 and 2020, resulting in 7,327 documents reviewed for title/abstract indication of meeting inclusion criteria. Full text document review was conducted for 1,758 documents for the next inclusion/exclusion gate. Documents were divided into group design (n = 132) and single-case experimental design (SCED) documents (n = 547) and reviewed for basic design criteria, resulting in 59 group design documents and 257 SCED documents. Lead project authors conducted screening remaining documents for false positives, resulting in 20 group and 176 SCED documents remaining for further analysis. Data extraction and potential moderator variable coding procedures are described in detail, with relevant coding manuals and other materials attached. Effect size metrics used for meta-analytic procedures are detailed.The research described here is supported by the Institute of Education Sciences, U.S. Department of Education, through Grant R324A180110 to Texas A&M University. The opinions expressed are those of the authors and do not represent views of the Institute or the U.S. Department of Educatio

Coral Identification Guide NAFO Area

Accurate reporting of benthic corals is increasingly important for mapping distributions and for the continued development of sustainable fisheries under the ecosystem approach. This coral identification guide is intended to help those on-board commercial and research fishing vessels to identify and record the various species of coral likely to be commonly encountered in fishing trawls. The guide is clear and simple to use, and will provide names to the majority of these beautiful bottomdwelling animals. The photographs are typically of caught specimens taken on the deck, as this gives the best picture of what is actually seen. Sadly, we rarely personally see corals in their natural habitat, except by looking at films and photos taken by deep underwater cameras

Kinetic study of time-dependent fixation of UVI on biochar

Biochar, a by-product from the production of biofuel and syngas by gasification, was tested as a material for adsorption and fixation of UVI from aqueous solutions. A batch experiment was conducted to study the factors that influence the adsorption and time-dependent fixation on biochar at 20oC, including pH, initial concentration of UVI and contact time. Uranium (UVI) adsorption was highly dependent on pH but adsorption on biochar was high over a wide range of pH values, from 4.5 to 9.0, and adsorption strength was time-dependent over several days. The experimental data for pH > 7 were most effectively modelled using a Freundlich adsorption isotherm coupled to a reversible first order kinetic equation to describe the time-dependent fixation of UVI within the biochar structure. Desorption experiments showed that UVI was only sparingly desorbable from the biochar with time and isotopic dilution with 233UVI confirmed the low, or time-dependent, lability of adsorbed 238UVI. Below pH 7 the adsorption isotherm trend suggested precipitation, rather than true adsorption, may occur. However, across all pH values (4.5–9) measured saturation indices suggested precipitation was possible: autunite below pH 6.5 and either swartzite, liebigite or bayleyite above pH 6.5

Asteroseismology of Eclipsing Binary Stars in the Kepler Era

Eclipsing binary stars have long served as benchmark systems to measure fundamental stellar properties. In the past few decades, asteroseismology - the study of stellar pulsations - has emerged as a new powerful tool to study the structure and evolution of stars across the HR diagram. Pulsating stars in eclipsing binary systems are particularly valuable since fundamental properties (such as radii and masses) can determined using two independent techniques. Furthermore, independently measured properties from binary orbits can be used to improve asteroseismic modeling for pulsating stars in which mode identifications are not straightforward. This contribution provides a review of asteroseismic detections in eclipsing binary stars, with a focus on space-based missions such as CoRoT and Kepler, and empirical tests of asteroseismic scaling relations for stochastic ("solar-like") oscillations.Comment: 28 pages, 12 figures, 2 tables; Proceedings of the AAS topical conference "Giants of Eclipse" (AASTCS-3), July 28 - August 2 2013, Monterey, C