49 research outputs found
Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 6: Accelerator Capabilities
These reports present the results of the 2013 Community Summer Study of the
APS Division of Particles and Fields ("Snowmass 2013") on the future program of
particle physics in the U.S. Chapter 6, on Accelerator Capabilities, discusses
the future progress of accelerator technology, including issues for high-energy
hadron and lepton colliders, high-intensity beams, electron-ion colliders, and
necessary R&D for future accelerator technologies.Comment: 26 page
A superconducting transformer system for high current cable testing
This article describes the development of a direct-current (dc) superconducting transformer system for the high current test of superconducting cables. The transformer consists of a core-free 10 464 turn primary solenoid which is enclosed by a 6.5 turn secondary. The transformer is designed to deliver a 50 kA dc secondary current at a dc primary current of about 50 A. The secondary current is measured inductively using two toroidal-wound Rogowski coils. The Rogowski coil signal is digitally integrated, resulting in a voltage signal that is proportional to the secondary current. This voltage signal is used to control the secondary current using a feedback loop which automatically compensates for resistive losses in the splices to the superconducting cable samples that are connected to the secondary. The system has been commissioned up to 28 kA secondary current. The reproducibility in the secondary current measurement is better than 0.05% for the relevant current range up to 25 kA. The drift in the secondary current, which results from drift in the digital integrator, is estimated to be below 0.5 A/min. The system's performance is further demonstrated through a voltage-current measurement on a superconducting cable sample at 11 T background magnetic field. The superconducting transformer system enables fast, high resolution, economic, and safe tests of the critical current of superconducting cable samples
Recommended from our members
The Engineering Design of the 1.5 m Diameter Solenoid for the MICERFCC Modules
The RF coupling coil (RFCC) module of MICE is where muonsthat have been cooled within the MICE absorber focus (AFC) modules arere-accelerated to their original longitudinal momentum. The RFCC moduleconsists of four 201.25 MHz RF cavities in a 1.4 meter diameter vacuumvessel. The muons are kept within the RF cavities by the magnetic fieldgenerated by a superconducting coupling solenoid that goes around the RFcavities. The coupling solenoid will be cooled using a pair of 4 K pulsetube cooler that will generate 1.5 W of cooling at 4.2 K. The magnet willbe powered using a 300 A two-quadrant power supply. This report describesthe ICST engineering design of the coupling solenoid forMICE
Characterisation of the muon beams for the Muon Ionisation Cooling Experiment
A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.2â2.3 Ïâmm-rad horizontally and 0.6â1.0 Ïâmm-rad vertically, a horizontal dispersion of 90â190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE
European Strategy for Particle Physics -- Accelerator R&D Roadmap
The 2020 update of the European Strategy for Particle Physics emphasised the
importance of an intensified and well-coordinated programme of accelerator R&D,
supporting the design and delivery of future particle accelerators in a timely,
affordable and sustainable way. This report sets out a roadmap for European
accelerator R&D for the next five to ten years, covering five topical areas
identified in the Strategy update. The R&D objectives include: improvement of
the performance and cost-performance of magnet and radio-frequency acceleration
systems; investigations of the potential of laser / plasma acceleration and
energy-recovery linac techniques; and development of new concepts for muon
beams and muon colliders. The goal of the roadmap is to document the collective
view of the field on the next steps for the R&D programme, and to provide the
evidence base to support subsequent decisions on prioritisation, resourcing and
implementation.Comment: 270 pages, 58 figures. Editor: N. Mounet. LDG chair: D. Newbold.
Panel chairs: P. V\'edrine (HFM), S. Bousson (RF), R. Assmann (plasma), D.
Schulte (muon), M. Klein (ERL). Panel editors: B. Baudouy (HFM), L. Bottura
(HFM), S. Bousson (RF), G. Burt (RF), R. Assmann (plasma), E. Gschwendtner
(plasma), R. Ischebeck (plasma), C. Rogers (muon), D. Schulte (muon), M.
Klein (ERL