A simple construction method for sequentially tidying up 2D online freehand sketches

This paper presents a novel constructive approach to sequentially tidying up 2D online freehand sketches for further 3D interpretation in a conceptual design system. Upon receiving a sketch stroke, the system first identifies it as a 2D primitive and then automatically infers its 2D geometric constraints related to previous 2D geometry (if any). Based on recognized 2D constraints, the identified geometry will be modified accordingly to meet its constraints. The modification is realized in one or two sequent geometric constructions in consistence with its degrees of freedom. This method can produce 2D configurations without iterative procedures to solve constraint equations. It is simple and easy to use for a real-time application. Several examples are tested and discussed

On representation of mechanical behavior and stereological measures of microstructure

Macroscopic homogeneity of a heterogeneous body is defined from various points of view. The applicability of the principle of Delesse to a single macroscopically homogeneous body is discussed. It is then seen that a function derived from a consideration of the area fraction of a phase can serve as a measure of clustering of particles of that phase

Environmental protection of titanium alloys at high temperatures

Various concepts were evaluated for protecting titanium alloys from oxygen contamination at 922 K (1200 F) and from hot-salt stress-corrosion at 755 K (900 F). It is indicated that oxygen-contamination resistance can be provided by a number of systems, but for hot-salt stress-corrosion resistance, factors such as coating integrity become very important. Titanium aluminides resist oxygen ingress at 922 K through the formation of alumina (on TiAl3) or modified TiO2 (on Ti3Al, TiAl) scales. TiAl has some resistance to attack by hot salt, but has limited ductility. Ductile Ti-Ni and Ti-Nb-Cr-Al alloys provide limited resistance to oxygen ingress, but are not greatly susceptible to hot-salt stress-corrosion cracking

Lunar nitrogen: Secular variation or mixing?

The two current models to explain the nearly 40% variation of the lunar nitrogen isotopic composition are: (1) secular variation of solar wind nitrogen; and (2) a two component mixing model having a constant, heavy solar wind admixed with varying amounts of indigenous light lunar N (LLN). Both models are needed to explain the step pyrolysis extraction profile. The secular variation model proposes that the low temperature release is modern day solar wind implanted into grain surfaces, the 900 C to 1100 C release is from grain surfaces which were once exposed to the ancient solar wind but which are now trapped inside agglutinates, and the >1100 C release as spallogenic N produced by cosmic rays. The mixing model ascribes the components to solar wind, indigenous lunar N and spallogenic N respectively. An extension of either interpretation is that the light N seen in lunar breccias or deep drill cores represent conditions when more N-14 was available to the lunar surface

Development of high-emittance scales on thoriated nickel-chromium-aluminum-base alloys

The surface regions of a DSNiCrAl alloy have been doped, by a pack diffusion process, with small amounts of Mn, Fe, or Co, and the effect of these dopants on the total normal emissivity of the scales produced by subsequent high temperature oxidation has been measured. While all three elements lead to a modest increase in emissivity, (up to 23% greater than the undoped alloy) only the change caused by manganese is thermally stable. However, this increased emissivity is within 85 percent of that of TDNiCr oxidized to form a chromia scale. The maganese-doped alloy is some 50 percent weaker than undoped DSNiCrAl after the doping treatment, and approximately 30 percent weaker after oxidation

Charge exchange reactions as tests for structures of exotic nuclei

Charge exchange reactions serve as alternative tests of the structures of exotic nuclei. Of particular relevance is the (p, n) reaction, which is related to the Gamow-Teller matrix element. The (p, n) reaction is also related to (p, p′) in the case of transitions to the isobaric analogue state (IAS). There are few measurements of (p, n) reactions using exotic beams. We revisit the case of 6He(p, n)6Li and discuss apparent discrepancies with other available data

COBE ground segment attitude determination

The Cosmic Background Explorer (COBE) spacecraft was launched in November 1989 by NASA to survey the sky for primordial radiation left from the Big Bang explosion. The success of the mission requires an accurate determination of the spacecraft attitude. While the accuracy of the attitude obtained from the attitude sensors is adequate for two of the experiments, the higher accuracy required by the Diffuse Infrared Background Experiment (DIRBE) is obtained by using the DIRBE instrument as a special type of star sensor. Presented here is an overview of the attitude processing algorithms used at the Cosmology Data Analysis Center (CDAC) and the results obtained from the flight data

Evaluation of the implementation of the alert issued by the UK National Patient Safety Agency on the storage and handling of potassium chloride concentrate solution

Objectives: To assess the effectiveness of the response of NHS hospital trusts to an alert issued by the National Patient Safety Agency designed to limit the availability of concentrated potassium chloride in hospitals in England and Wales, and to determine the nature of any unintended consequences. Design: Multi-method study involving interviews and a physical inspection of clinical areas. Setting: 207 clinical areas in 20 randomly selected acute NHS trusts in England and Wales between 31 October 2002 and 31 January 2003. Participants: Senior managers and ward based medical and nursing staff. Main outcome measures: Degree of staff awareness of and compliance with the requirements of the national alert, withdrawal of concentrated potassium chloride solutions from non-critical areas, provision of pre-diluted alternatives, storage and recording in accordance with controlled drug legislation. Results: All trusts required that potassium chloride concentrate be stored in a separate locked cupboard from common injectable diluents (100% compliance). Unauthorised stocks of potassium chloride were found in five clinical areas not authorised by the trust (98% compliance). All trusts required documentation control of potassium chloride concentrate in clinical areas, but errors were recorded in 20 of the 207 clinical areas visited (90% compliance). Of those interviewed, 78% of nurses and 30% of junior doctors were aware of the alert. Conclusions: The NPSA alert was effective and resulted in rapid development and implementation of local policies to reduce the availability of concentrated potassium chloride solutions. The success is likely to be partly due to the nature of the proposed changes and it cannot be assumed that future alerts will be equally effective. Continued vigilance will be necessary to help sustain the changes