Experimental quantification of contaminant ingress into a buried leaking pipe during transient events

It has been hypothesized that negative pressures caused by transients within water distribution systems may result in ingress of contaminated groundwater through leaks and hence pose a risk to public health. This paper presents results of contaminant ingress experiments from a novel laboratory facility at The University of Sheffield. An engineered leak surrounded by porous media was subjected to pressure transients resulting from the rapid closure of an upstream valve. It has been shown that a pollutant originating externally was drawn in and transported to the end of the pipe loop. This paper thus presents the first fully representative results proving the occurrence and hence, risk to potable water quality of contaminant ingress

Understanding and Managing Discolouration Risk in Trunk Mains

There is currently no accepted concept or approach for understanding and controlling discolouration risk associated with trunk mains. This paper assesses the applicability of cohesive layer theories to manage discolouration and a modelling tool that describes the process of particulate material accumulation. Results are presented from independent field experiments across the UK and internationally that evidence hydraulically induced mobilisation, or effectively cleaning, once imposed system shear stress exceeds normal conditions. Model calibration to measured data validates the cohesive layer concept with transferability in empirically derived parameters demonstrating a viable operational planning tool. The experiments highlight the accumulation of material layers as a continuous and ubiquitous process, such that fully clean pipes can never exist and helping explain how discolouration risk changes over time. A major practical implication of the novel understanding demonstrated in this paper is that discolouration risk in trunk mains can be simply managed by pro-active strategies that regularly vary the hydraulic conditions. This avoids the need for disruptive and expensive out of service invasive interventions yet offers operators a cost-effective long-term strategy to safeguard water quality

Impacts of compound properties and sediment characteristics on the sorption behaviour of pharmaceuticals in aquatic systems

Sorption is a key factor in determining the persistence, attenuation and bioavailability of sediment-associated contaminants. However, our understanding of the sorption behaviour of pharmaceuticals in sediments is poor. In this study, we investigated the sorption behaviour of a diverse set of pharmaceuticals in a range sediment types. Sorption affinity of pharmaceuticals for all sediments was found to increase in the order mefenamic acid <cimetidine <atenolol <amitriptyline <diltiazem. Comparison of the experimental observations with predictions from an existing model for estimating sorption revealed the model worked poorly for the study pharmaceuticals. Multiple linear regression analysis was therefore used to develop new models for estimating sorption of individual pharmaceuticals based on sediment properties. The analyses indicated that sorption is related to properties such as Log Dow of a compound in the sediment (lipophilicity corrected for the sediment pH), cation exchange capacity, clay%, organic carbon content and exchangeable Ca2+, although, with the exception of atenolol, robust relationships between sediment properties and sorption were not obtained. Overall, the results demonstrate how complex the processes are that drive the sorption of pharmaceuticals in sediments and highlight the need for generation of further experimental data and further model development work

Uncharted waters: the unintended impacts of residual chlorine on water quality and biofilms

Disinfection residuals in drinking water protect water quality and public heath by limiting planktonic microbial regrowth during distribution. However, we do not consider the consequences and selective pressures of such residuals on the ubiquitous biofilms that persist on the vast internal surface area of drinking water distribution systems. Using a full scale experimental facility, integrated analyses were applied to determine the physical, chemical and biological impacts of different free chlorine regimes on biofilm characteristics (composition, structure and microbiome) and water quality. Unexpectedly, higher free chlorine concentrations resulted in greater water quality degredation, observable as elevated inorganic loading and greater discolouration (a major cause of water quality complaints and a mask for other failures). High-chlorine concentrations also reduced biofilm cell concentrations but selected for a distinct biofilm bacterial community and inorganic composition, presenting unique risks. The results challenge the assumption that a measurable free chlorine residual necessarily assures drinking water safety

Quantity and Quality Benefits of in-Service Invasive Cleaning of Trunk Mains

Trunk mains are high risk critical infrastructure where poor performance can impact on large numbers of customers. Both quantity (e.g. hydraulic capacity) and quality (e.g. discolouration) of trunk main performance are affected by asset deterioration in the form of particle accumulation at the pipe wall. Trunk main cleaning techniques are therefore desirable to remove such material. However, little is quantified regarding the efficacy of different maintenance interventions or longer-term changes following such cleaning. This paper presents an assessment of quantity and quality performance of a trunk main system pre, post and for 12 months following cleaning using pigging with ice slurry. Hydraulic calibration showed a 7 times roughness height reduction after ice slurry pigging, evidencing substantially improved hydraulic capacity and reduced headloss. Turbidity response due to carefully imposed shear stress increase remained significant after the cleaning intervention, showing that relatively loose material had not been fully removed from the pipe wall. Overall the results demonstrate that cleaning by pigging with ice slurry can be beneficial for quantity performance, but care and further assessment may be necessary to realise the full quality benefits

Decision-making tools to manage the microbiology of drinking water distribution systems

This paper uses a two-fold multi-criteria decision-making (MCDM) approach applied for the first time to the field of microbial management of drinking water distribution systems (DWDS). Specifically, the decision-making trial and evaluation laboratory (DEMATEL) was applied removing the need for reliance on expert judgement, and analysed interdependencies among water quality parameters and microbiological characteristics of DWDS composed of different pipe materials. In addition, the fuzzy technique for order preference by similarity to ideal solution (FTOPSIS) ranked the most common bacteria identified during trials in a DWDS according to their relative abundance while managing vagueness affecting the measurements. The novel integrated approach presented and proven here for an initial real world data set provides new insights in the interdependence of environmental conditions and microbial populations. Specifically, the application shows as the bacteria having associated the most significant microbial impact may not be the most abundant. This offers the potential for integrated management strategies to promote favourable microbial conditions to help safeguard drinking water quality

Predictive water quality modelling and resilience flow conditioning to manage discolouration risk in operational trunk mains

This paper presents predictive discolouration modelling and subsequent field trial validation for a cast iron trunk main network. This enabled a UK water company to propose an ‘operational flow conditioning’ maintenance plan that reduces discolouration risk, improves network resilience and asset condition and yet does not require the trunk main to be decommissioned for invasive cleaning. This represents substantial time and cost benefits. Pre- and post-trial turbidity monitoring data are presented which identified a daily flux of material, a factor in the regeneration of material layers that have been shown to cause discolouration when mobilised. Additional data showing the occurrence of pressure transients are also presented, the latter being a possible cause of contaminant ingress and asset failure. After 6 months a second flow trial was conducted and modelled, confirming the regeneration of particulate discolouration material across the range of mobilising forces applied during the trial. It also indicated full layer development, or maximum discolouration risk, may occur in just over 2 years for this cast iron main. This highlights the need for appropriate maintenance strategies, such as periodic flow conditioning identified here, to mitigate discolouration risk and help safeguard water quality

Dynamics of biofilm re-growth in drinking water distributions systems

The majority of biomass within water distribution systems is in the form of attached biofilm. This is known to be central to drinking water quality degradation following treatment yet little understanding of the dynamics of these highly heterogeneous communities exists. This paper presents original information on such dynamics with findings demonstrating patterns of material accumulation, seasonality and influential factors. Rigorous flushing operations repeated over a one-year period on an operational, chlorinated system in the UK are presented. Intensive monitoring and sampling were undertaken including time series turbidity and detailed microbial analysis using 16S rRNA Illumina MiSeq sequencing. Results show bacterial dynamics were influenced by differences in the supplied water and by the material remaining attached to the pipe wall following flushing. Turbidity, metals and phosphate were the main factors correlated with the distribution of bacteria in the samples. Coupled with the lack of inhibition of biofilm development due to chlorine residual, this suggests that limiting inorganic nutrients, other than organic carbon, might be a viable component in treatment strategies to manage biofilms. The research also showed that repeat flushing exerted beneficial selective pressure, thus also a viable advantageous biofilm management option. This work advances our understanding of microbiological processes in drinking water distribution systems and helps inform strategies to optimise asset performance. IMPORTANCE: This research provides with novel information regarding dynamics of biofilm formation in real drinking water distribution systems made of different materials. This new knowledge on microbiological process in water supply systems can be used to optimise the performance of the distribution network and to guarantee safe and good quality drinking water to consumers

Microalbuminuria could improve risk stratification in patients with TIA and minor stroke.

Published onlineJournal ArticleThis is the final version of the article. Available from Wiley Open Access via the DOI in this record.OBJECTIVE: Transient ischemic attacks (TIA) and minor strokes are important risk factors for recurrent strokes. Current stroke risk prediction scores such as ABCD2, although widely used, lack optimal sensitivity and specificity. Elevated urinary albumin excretion predicts cardiovascular disease, stroke, and mortality. We explored the role of microalbuminuria (using albumin creatinine ratio (ACR)) in predicting recurrence risk in patients with TIA and minor stroke. METHODS: Urinary ACR was measured on a spot sample in 150 patients attending a daily stroke clinic with TIA or minor stroke. Patients were followed up at day 7, 30, and 90 to determine recurrent stroke, cardiovascular events, or death. Eligible patients had a carotid ultrasound Doppler investigation. High-risk patients were defined as those who had an event within 90 days or had >50% internal carotid artery (ICA) stenosis. RESULTS: Fourteen (9.8%) recurrent events were reported by day 90 including two deaths. Fifteen patients had severe ICA stenosis. In total, 26 patients were identified as high risk. These patients had a higher frequency of previous stroke or hypercholesterolemia compared to low-risk patients (P = 0.04). ACR was higher in high-risk patients (3.4 [95% CI 2.2-5.2] vs. 1.7 [1.5-2.1] mg/mmol, P = 0.004), independent of age, sex, blood pressure, diabetes, and previous stroke. An ACR greater than 1.5 mg/mmol predicted high-risk patients (Cox proportional hazard ratio 3.5 (95% CI 1.3-9.5, P = 0.01). INTERPRETATION: After TIA or minor stroke, a higher ACR predicted recurrent events and significant ICA stenosis. Incorporation of urinary ACR from a spot sample in the acute setting could improve risk stratification in patients with TIA and minor stroke.This article presents independent research supported by the NIHR Exeter Clinical Research Facility and the NIHR Collaboration for Leadership in Applied Health Research and Care (CLAHRC) for the South West Peninsula. The views expressed in this publication are those of the author(s) and not necessarily those of the NIHR Exeter Clinical Research Facility, the NHS, the NIHR or the Department of Health in England. We also acknowledge and thank the South West Stroke Research Network for their help with patient recruitment and follow-up, and Mrs. Audrey Peters and Mr. Frank Summers for performing the carotid Doppler scans

Modelling both the continual erosion and regeneration of discolouration material in drinking water distribution systems

The erosion of the cohesive layers of particulate matter that causes discolouration in water distribution system mains has previously been modelled using the Prediction of Discolouration in Distribution Systems (PODDS) model. When first proposed, PODDS featured an unvalidated means by which material regeneration on pipe walls could be simulated. Field and laboratory studies of material regeneration have yielded data that suggest that the PODDS formulations incorrectly model these processes. A new model is proposed to overcome this shortcoming. It tracks the relative amount of discolouration material that is bound to the pipe wall over time at each of a number of shear strengths. The model formulations and a mass transport model have been encoded as software, which has been used to verify the model’s constructs and undertake sensitivity analyses. The new formulations for regeneration are conceptually consistent with field and laboratory observed data and has potential value in the proactive management of water distribution systems, such as evaluating change in discolouration risk and planning timely interventions