Health beliefs as a key determinant of intent to use anabolic-androgenic steroids (AAS) among high-school football players: implications for prevention

The use of anabolic-androgenic steroids (AAS) is problematic for youth because of negative effects such as reduced fertility, increased aggression and exposure to toxic chemicals. An effective programme for addressing this problem is Adolescents Training and Learning to Avoid Steroids (ATLAS). This secondary analysis expands prior research by identifying prominent mechanisms of change and highlighting key longitudinal processes that contributed to the success of ATLAS. The current sample consists of highschool football players (N = 1.068; Mage = 15.25) who began ATLAS in grades nine through eleven and participated in booster sessions for two years post-baseline. Knowledge of AAS effects, belief in media ads, reasons not to use AAS, perceived severity of and susceptibility to AAS effects and ability to resist drug offers were critical mediators of the relations between ATLAS and outcomes. Modern applications of the ATLAS programme are also discussed

Fast Measurements of Flow Through Mitral Regurgitant Orifices With Magnetic Resonance Phase Velocity Mapping

Magnetic-resonance (MR) phase velocity mapping (PVM) shows promise in measuring the mitral regurgitant volume. However, in its conventional nonsegmented form, MR-PVM is slow and impractical for clinical use. The aim of this study was to evaluate the accuracy of rapid, segmented k-spaceMR-PVM in quantifying the mitral regurgitant flow through a control volume (CV) method. Two segmented MR-PVM schemes, one with seven (seg-7) and one with nine (seg-9) lines per segment, were evaluated in acrylic regurgitant mitral valve models under steady and pulsatile flow. A nonsegmented (nonseg) MR-PVM acquisition was also performed for reference. The segmented acquisitions were considerably faster (min) than the nonsegmented (\u3e45 min). The regurgitant flow rates and volumes measured with segmented MR-PVM agreed closely with those measured with nonsegmented MR-PVM (differences 0.05), when the CV was large enough to exclude the region of flow acceleration and aliasing from its boundaries. The regurgitant orifice shape (circular vs. slit-like) and the presence of aortic outflow did not significantly affect the accuracy of the results under both steady and pulsatile flow (p\u3e0.05). This study shows that segmented k-space MR-PVM canaccurately quantify the flow through regurgitant orifices using the CV method and demonstrates great clinical potential

Neutral Nitrogen Acceptors in ZnO: The \u3csup\u3e67\u3c/sup\u3eZn Hyperfine Interactions

Electron paramagnetic resonance (EPR) is used to characterize the 67Zn hyperfine interactions associated with neutral nitrogen acceptors in zinc oxide. Data are obtained from an n-type bulk crystal grown by the seeded chemical vapor transport method. Singly ionized nitrogen acceptors (N−) initially present in the crystal are converted to their paramagnetic neutral charge state (N0) during exposure at low temperature to 442 or 633 nm laser light. The EPR signals from these N0 acceptors are best observed near 5 K. Nitrogen substitutes for oxygen ions and has four nearest-neighbor cations. The zinc ion along the [0001] direction is referred to as an axial neighbor and the three equivalent zinc ions in the basal plane are referred to as nonaxial neighbors. For axial neighbors, the 67Zn hyperfine parameters are A‖ = 37.0 MHz and A⊥ = 8.4 MHz with the unique direction being [0001]. For nonaxial neighbors, the 67Zn parameters are A1 = 14.5 MHz, A2 = 18.3 MHz, and A3 = 20.5 MHz with A3 along a [10ˉ10] direction (i.e., in the basal plane toward the nitrogen) and A2 along the [0001] direction. These 67Zn results and the related 14N hyperfine parameters provide information about the distribution of unpaired spin density at substitutional neutral nitrogen acceptors in ZnO

Sandstone matrix acidizing knowledge and future development

To meet rising global demands for energy, the oil and gas industry continuously strives to develop innovative oilfield technologies. With the development of new enhanced oil recovery techniques, sandstone acidizing has been significantly developed to contribute to the petroleum industry. Different acid combinations have been applied to the formation, which result in minimizing the near wellbore damage and improving the well productivity. A combination of hydrofluoric acid and hydrochloric acid (HF:HCl) known as mud acid has gained attractiveness in improving the porosity and permeability of the reservoir formation. However, high-temperature matrix acidizing is now growing since most of the wells nowadays become deeper and hotter temperature reservoirs, with a temperature higher than 200 °F. As a result, mud acid becomes corrosive, forms precipitates and reacts rapidly, which causes early consumption of acid, hence becoming less efficient due to high pH value. However, different acids have been developed to combat these problems where studies on retarded mud acids, organic-HF acids, emulsified acids, chelating agents have shown their effectiveness at different conditions. These acids proved to be alternative to mud acid in sandstone acidizing, but the reaction mechanism and experimental analysis have not yet been investigated. The paper critically reviews the sandstone acidizing mechanism with different acids, problems occurred during the application of different acids and explores the reasons when matrix stimulation is successful over fracturing. This paper also explores the future developing requirement for matrix acidizing treatments and new experimental techniques that can be useful for further development, particularly in developing new acids and acidizing techniques, which would provide better results and information of topology, morphology and mineral dissolution and the challenges associated with implementing these “new” technologies

Lithium and Gallium Vacancies in LiGaO\u3csub\u3e2\u3c/sub\u3e Crystals

Lithium gallate (LiGaO2) is a wide-band-gap semiconductor with an optical gap greater than 5.3 eV. When alloyed with ZnO, this material offers broad functionality for optical devices that generate, detect, and process light across much of the ultraviolet spectral region. In the present paper, electron paramagnetic resonance (EPR) is used to identify and characterize neutral lithium vacancies (V0Li) and doubly ionized gallium vacancies (V2−Ga) in LiGaO2 crystals. These S = 1/2 native defects are examples of acceptor-bound small polarons, where the unpaired spin (i.e., the hole) is localized on one oxygen ion adjacent to the vacancy. Singly ionized lithium vacancies (V−Li) are present in as-grown crystals and are converted to their paramagnetic state by above-band-gap photons (x rays are used in this study). Because there are very few gallium vacancies in as-grown crystals, a post-growth irradiation with high-energy electrons is used to produce the doubly ionized gallium vacancies (V2−Ga). The EPR spectra allow us to establish detailed models for the two paramagnetic vacancies. Anisotropy in their g matrices is used to identify which of the oxygen ions adjacent to the vacancy has trapped the hole. Both spectra also have resolved structure due to hyperfine interactions with 69Ga and 71Ga nuclei. The V0Li acceptor has nearly equal interactions with Ga nuclei at two Ga sites adjacent to the trapped hole, whereas the V2−Ga acceptor has an interaction with Ga nuclei at only one adjacent Ga site

Oxygen Vacancies in LiAlO\u3csub\u3e2\u3c/sub\u3e Crystals

Singly ionized oxygen vacancies are produced in LiAlO2 crystals by direct displacement events during a neutron irradiation. These vacancies, with one trapped electron, are referred to as V+O centers. They are identified and characterized using electron paramagnetic resonance (EPR) and optical absorption. The EPR spectrum from the V+O centers is best monitored near 100 K with low microwave power. When the magnetic field is along the [001] direction, this spectrum has a g value of 2.0030 and well-resolved hyperfine interactions of 310 and 240 MHz with the two 27Al nuclei that are adjacent to the oxygen vacancy. A second EPR spectrum, also showing hyperfine interactions with two 27Al nuclei, is attributed to a metastable state of the V+O center. An optical absorption band peaking near 238 nm is assigned to V+O centers. Bleaching light from a Hg lamp converts a portion of the V+O centers to V0O centers (these latter centers are oxygen vacancies with two trapped electrons). The V0O centers have an absorption band peaking near 272 nm, a photoluminescence band peaking near 416 nm, and a photoluminescence excitation band peaking near 277 nm. Besides the oxygen-vacancy EPR spectra, a holelike spectrum with a resolved, but smaller, hyperfine interaction with one 27Al nucleus is present in LiAlO2 after the neutron irradiation. This spectrum is tentatively assigned to doubly ionized aluminum vacancies

Noninvasive Quantification of Fluid Mechanical Energy Losses in the Total Cavopulmonary Connection with Magnetic Resonance Phase Velocity Mapping

A major determinant of the success of surgical vascular modifications, such as the total cavopulmonary connection (TCPC), is the energetic efficiency that is assessed by calculating the mechanical energy loss of blood flow through the new connection. Currently, however, to determine the energy loss, invasive pressure measurements are necessary. Therefore, this study evaluated the feasibility of the viscous dissipation (VD) method, which has the potential to provide the energy loss without the need for invasive pressure measurements. Two experimental phantoms, a U-shaped tube and a glass TCPC, were scanned in a magnetic resonance (MR) imaging scanner and the images were used to construct computational models of both geometries. MR phase velocity mapping (PVM) acquisitions of all three spatial components of the fluid velocity were made in both phantoms and the VD was calculated. VD results from MR PVM experiments were compared with VD results from computational fluid dynamics (CFD) simulations on the image-based computational models. The results showed an overall agreement between MR PVM and CFD. There was a similar ascending tendency in the VD values as the image spatial resolution increased. The most accurate computations of the energy loss were achieved for a CFD grid density that was too high for MR to achieve under current MR system capabilities (in-plane pixel size of less than 0.4 mm). Nevertheless, the agreement between the MR PVM and the CFD VD results under the same resolution settings suggests that the VD method implemented with a clinical imaging modality such as MR has good potential to quantify the energy loss in vascular geometries such as the TCPC

Observation Of Singly Ionized Selenium Vacancies In Znse Grown By Molecular Beam Epitaxy

Electron paramagnetic resonance(EPR) has been used to investigate singly ionized selenium vacancy V Se + centers in ZnSe epilayers grown by molecular beam epitaxy(MBE). The study included undoped and nitrogen-doped films. Spectra taken at 8 K and 9.45 GHz, as the magnetic field was rotated in the plane from [100] to [010], showed an isotropic signal at g =2.0027±0.0004 with a linewidth of 5.8 G. In the two samples where this signal was observed, estimates of concentration were approximately 1.1×10 17 and 6.3×10 17 cm −3 . The appearance of the EPR signal correlated with an increase in the Zn/Se beam equivalent pressure ratio (during growth) in undoped films and with an increase in the nitrogen concentration in doped films. We conclude that the singly ionized selenium vacancy may be a dominant point defect in many MBE-grown ZnSe layers and that these defects may play a role in the compensation mechanisms in heavily nitrogen-doped ZnSe thin films

Ab-initio study of oxygen vacancies in alpha-quartz

Extrinsic levels, formation energies, and relaxation geometries are calculated ab initio for oxygen vacancies in alpha-quartz SiO2. The vacancy is found to be thermodynamically stable in the charge states Q=+3, Q=0, Q=--2, and Q=-3. The charged states are stabilized by large and asymmetric distortions near the vacancy site. Concurrently, Franck-Condon shifts for absorption and recombination related to these states are found to be strongly asymmetric. In undoped quartz, the ground state of the vacancy is the neutral charge state, while for moderate p-type and n-type doping, the +3 and -3 states are favored, respectively, over a wide Fermi level window. Optical transitions related to the vacancy are predicted at around 3 eV and 6.5 eV (absorption) and 2.5 to 3.0 eV (emission), depending on the charge state of the ground state.Comment: 6 figures included, but only Fig.1 actually change

Reliable In-Plane Velocity Measurements With Magnetic Resonance Velocity Imaging

Magnetic resonance (MR) imaging is a well-known diagnostic imaging modality. In addition to its high-quality imaging capabilities, hydrogen-based MR can also provide non-invasively the velocity of water-based fluids in all three spatial directions (through-plane and in-plane) in an image. Many previous studies showed that MR velocity imaging can accurately measure the through-plane velocity. The aim of this study was to evaluate how reliable are the in-plane velocity measurements in an image. The axial velocity of water in horizontal tubes (inner diameter: 14.7–26.2 mm) was measured with segmented (fast) and non-segmented (slow) k-space MR velocity imaging using: (a) an imaging slice placed perpendicular to the tube axis with through-plane velocity-encoding; and (b) an imaging slice placed parallel to the tube axis with in-plane velocity-encoding. The two planes intersected along the vertical tube-centerline. The flow rate was accurately quantified (mean error plane velocity profiles were not significantly different from the through-plane profiles (mean difference =6%, correlation coefficients \u3e0.98). There was no significant difference between the velocity profiles from the segmented and the non-segmented sequences (mean difference 0.95). The results of this study suggest that fast MR velocity imaging can measure the in-plane velocity in an image with reliability