30 research outputs found
Enhanced follicular delivery of finasteride to human scalp skin using heat and chemical penetration enhancers
© The Author(s) 2020. This article is an open access publication. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.Purpose The aim of this work was to evaluate whether improved topical delivery of finasteride, focussed to the hair follicles of human scalp skin could be achieved with application of short durations of heat and use of specific chemical penetration enhancers. Methods Franz cell experiments with human scalp skin were performed with a range of chemical penetration enhancers at 32°C and 45°C to simulate normal and heated conditions. Selected chemical penetration enhancers were taken forward for finite dose Franz cell studies which examined the effect of heat produced by a prototype external heating system that supplied either 20 or 30 min of additional heat over both a 24 h and a 1 h time period. Results Short durations of externally applied heat significantly increased finasteride penetration into human scalp skin after 24 h. Analysis of drug distribution in the skin after 1 h and 24 h indicated that both heat and chemical penetration enhancer selection influenced drug delivery to the hair follicles. Conclusion The use of short durations of heat in combination with specific chemical penetration enhancers was able to increase the delivery of finasteride to human scalp skin and provide focussed drug delivery to the hair follicles.Peer reviewe
Stabilization of hot-melt extrusion formulations containing solid solutions using polymer blends
This study was aimed at enhancing the physical stability of the drug clotrimazole (CT) and the polymer contained within hot-melt extrusion (HME) films using polymer blends of hydroxypropyl cellulose (HPC) and poly(ethylene oxide) (PEO). The HME films were investigated for solid-state characteristics, moisture sorption, bioadhesivity, mechanical properties, glass transition temperature, release characteristics, and physical and chemical stability of the drug and the polymer within the HME films. The solid-state characterization of the drug and the polymer was performed using differential scanning calorimetry, x-ray diffractometry, and dynamic mechanical analysis. A texture analyzer was used to study the bioadhesive and mechanical properties of the HME films. The physical and chemical stability of the films, stored at 25°C/60% relative humidity or in a desiccator, was studied for up to 12 months. CT was found to be in solid solution within all of the formulations extruded. The physical stability of the drug and PEO in the HME films increased with increasing HPC concentration, but the bioadhesivity and flexibility of the PEO films decreased with increasing HPC concentration. Films containing HPC: PEOâ¶CT in the ratio of 55â¶35â¶10 demonstrated optimum physical-mechanical, bioadhesive, and release properties. In conclusion, polymer blends of HPC and PEO were used successfully to tailor the drug release, mechanical and bio-adhesive properties, and stability of the HME films
Off-line and on-line measurements of drug-loaded hot-melt extruded films using Raman spectroscopy
Thermodynamically stable amorphous drug dispersions in amorphous hydrophilic polymers engineered by hot melt extrusion
Spatial Characterization of Hot Melt Extruded Dispersion Systems Using Thermal Atomic Force Microscopy Methods:The effects of processing parameters on phase separation
In this study we explore the use of nano-scale localized thermal analysis (LTA) and transition temperature microcopy (TTM) as a novel combined approach to studying phase separation in HME dispersions of cyclosporine A in Eudragit EPO
A Novel Injection-Molded Capsular Device for Oral Pulsatile Delivery Based on Swellable/Erodible Polymers
The feasibility of injection molding was explored in the preparation of a novel capsular device for oral pulsatile/delayed delivery based on swellable/erodible polymers. For this purpose, a mold intended to be coupled with a bench-top injection-molding press was designed. This was expected to enable the preparation of matching capsule cap and body items within a single manufacturing cycle and the selection of differing shell thicknesses (300, 600, and 900Â ÎŒm). Hydroxypropylcellulose (KlucelÂź EF, LF, and GF) was employed as the release-controlling polymer in admixture with polyethylene glycol 1500 (10%, w/w) as the plasticizer. After preliminary trials aimed at the setup of operating conditions, KlucelÂź EF and LF capsule shells with satisfactory technological properties were manufactured. The performance of capsular devices filled with a tracer drug powder was studied by means of a modified USP31 disintegration apparatus. Typical in vitro delayed release patterns were thereby obtained, with lag time increasing as a function of the wall thickness. A good correlation was found between the latter parameter and t10%, i.e., the time to 10% release, for both polymer grades employed. On the basis of the overall results, the investigated technique was proven suitable for the manufacturing of an innovative pulsatile release platform