A 43-Gbps Lithium Niobate Modulator Driver Module

This paper describes the realization of a 43-Gbps Lithium Niobate modulator driver module. The NRZ driver module utilizes four stages of GaAs p-HEMT MMIC amplifiers integrated with an output level detector and feedback loop to provide thermal stability and external control of the output swing. The bias and loop control circuitry are contained in the housing on a PC board external to the sealed MIC section. The integrated module (50.8 x 73.4 x 9.5 mm 3) provides 6.0 Vp-p controllable single-ended output voltage while dissipating only 4 watt

Light Collimation and Focussing by a Thin Flat Metallic Slab

We present experimental and theoretical work showing that a flat metallic slab can collimate and focus light impinging on the slab from a punctual source. The effect is optimised when the radiation is around the bulk, not at the surface, plasma frequency. And the smaller the imaginary part of the permittivity is, the better the collimation. Experiments for Ag in the visible as well as calculations are presented. We also discuss the interesting case of the Aluminium whose imaginary part of the permittivity is very small at the plasma frequency in UV radiation. Generalization to other materials and radiations are also discussed.Comment: 6 pages, 3 figures. To be published on Optics Lette

A review of size and geometrical factors influencing resonant frequencies in metamaterials

Although metamaterials and so-called left-handed media have originated from theoretical considerations, it is only by their practical fabrication and the measurement of their properties that they have gained credibility and can fulfil the potential of their predicted properties. In this review we consider some of the more generally applicable fabrication methods and changes in geometry as they have progressed, exhibiting resonant frequencies ranging from radio waves to the visible optical region

Superlensing properties of one-dimensional dielectric photonic crystals

We present the experimental observation of the superlensing effect in a slab of a one-dimensional photonic crystal made of tilted dielectric elements. We show that this flat lens can achieve subwavelength resolution in different frequency bands. We also demonstrate that the introduction of a proper corrugation on the lens surface can dramatically improve both the transmission and the resolution of the imaged signal.Comment: 9 pages, 9 figure

Optimization of quasi-normal eigenvalues for Krein-Nudelman strings

The paper is devoted to optimization of resonances for Krein strings with total mass and statical moment constraints. The problem is to design for a given $\alpha \in \R$ a string that has a resonance on the line \alpha + \i \R with a minimal possible modulus of the imaginary part. We find optimal resonances and strings explicitly.Comment: 9 pages, these results were extracted in a slightly modified form from the earlier e-print arXiv:1103.4117 [math.SP] following an advise of a journal's refere

Determination of Effective Permittivity and Permeability of Metamaterials from Reflection and Transmission Coefficients

We analyze the reflection and transmission coefficients calculated from transfer matrix simulations on finite lenghts of electromagnetic metamaterials, to determine the effective permittivity and permeability. We perform this analysis on structures composed of periodic arrangements of wires, split ring resonators (SRRs) and both wires and SRRs. We find the recovered frequency-dependent permittivity and permeability are entirely consistent with analytic expressions predicted by effective medium arguments. Of particular relevance are that a wire medium exhibits a frequency region in which the real part of permittivity is negative, and SRRs produce a frequency region in which the real part of permeability is negative. In the combination structure, at frequencies where both the recovered real part of permittivity and permeability are simultaneously negative, the real part of the index-of-refraction is found also to be unambigously negative.Comment: *.pdf file, 5 figure

Immittance Matching for Multi-dimensional Open-system Photonic Crystals

An electromagnetic (EM) Bloch wave propagating in a photonic crystal (PC) is characterized by the immittance (impedance and admittance) of the wave. The immittance is used to investigate transmission and reflection at a surface or an interface of the PC. In particular, the general properties of immittance are useful for clarifying the wave propagation characteristics. We give a general proof that the immittance of EM Bloch waves on a plane in infinite one- and two-dimensional (2D) PCs is real when the plane is a reflection plane of the PC and the Bloch wavevector is perpendicular to the plane. We also show that the pure-real feature of immittance on a reflection plane for an infinite three-dimensional PC is good approximation based on the numerical calculations. The analytical proof indicates that the method used for immittance matching is extremely simplified since only the real part of the immittance function is needed for analysis without numerical verification. As an application of the proof, we describe a method based on immittance matching for qualitatively evaluating the reflection at the surface of a semi-infinite 2D PC, at the interface between a semi-infinite slab waveguide (WG) and a semi-infinite 2D PC line-defect WG, and at the interface between a semi-infinite channel WG and a semi-infinite 2D PC slab line-defect WG.Comment: 8 pages, 6 figure

Fast Purcell-enhanced single photon source in 1,550-nm telecom band from a resonant quantum dot-cavity coupling

High-bit-rate nanocavity-based single photon sources in the 1,550-nm telecom band are challenges facing the development of fibre-based long-haul quantum communication networks. Here we report a very fast single photon source in the 1,550-nm telecom band, which is achieved by a large Purcell enhancement that results from the coupling of a single InAs quantum dot and an InP photonic crystal nanocavity. At a resonance, the spontaneous emission rate was enhanced by a factor of 5 resulting a record fast emission lifetime of 0.2 ns at 1,550 nm. We also demonstrate that this emission exhibits an enhanced anti-bunching dip. This is the first realization of nanocavity-enhanced single photon emitters in the 1,550-nm telecom band. This coupled quantum dot cavity system in the telecom band thus provides a bright high-bit-rate non-classical single photon source that offers appealing novel opportunities for the development of a long-haul quantum telecommunication system via optical fibres.Comment: 16 pages, 4 figure

A picogram and nanometer scale photonic crystal opto-mechanical cavity

We describe the design, fabrication, and measurement of a cavity opto-mechanical system consisting of two nanobeams of silicon nitride in the near-field of each other, forming a so-called "zipper" cavity. A photonic crystal patterning is applied to the nanobeams to localize optical and mechanical energy to the same cubic-micron-scale volume. The picrogram-scale mass of the structure, along with the strong per-photon optical gradient force, results in a giant optical spring effect. In addition, a novel damping regime is explored in which the small heat capacity of the zipper cavity results in blue-detuned opto-mechanical damping.Comment: 15 pages, 4 figure

Actuation of Micro-Optomechanical Systems Via Cavity-Enhanced Optical Dipole Forces

We demonstrate a new type of optomechanical system employing a movable, micron-scale waveguide evanescently-coupled to a high-Q optical microresonator. Micron-scale displacements of the waveguide are observed for milliwatt(mW)-level optical input powers. Measurement of the spatial variation of the force on the waveguide indicates that it arises from a cavity-enhanced optical dipole force due to the stored optical field of the resonator. This force is used to realize an all-optical tunable filter operating with sub-mW control power. A theoretical model of the system shows the maximum achievable force to be independent of the intrinsic Q of the optical resonator and to scale inversely with the cavity mode volume, suggesting that such forces may become even more effective as devices approach the nanoscale.Comment: 4 pages, 5 figures. High resolution version available at (http://copilot.caltech.edu/publications/CEODF_hires.pdf). For associated movie, see (http://copilot.caltech.edu/research/optical_forces/index.htm