101 research outputs found

    Hybrid HIPIMS and DC magnetron sputtering deposition of TiN coatings: Deposition rate, structure and tribological properties

    Get PDF
    High power impulse magnetron sputtering (HIPIMS) has the advantage of ultra-dense plasma deposition environment although the resultant deposition rate is significantly low. By using a closed field unbalanced magnetron sputtering system, a hybrid process consisting of one HIPIMS powered magnetron and three DC magnetrons has been introduced in the reactive sputtering deposition of a TiN hard coating on a hardened steel substrate, to investigate the effect of HIPIMS incorporation on the deposition rate and on the microstructure and mechanical and tribological properties of the deposited coating. Various characterizations and tests have been applied in the study, including XRD, FEG-SEM, cross-sectional TEM, Knoop hardness, adhesion tests and unlubricated ball-on-disk tribo-tests. The results revealed that, both the DC magnetron and hybrid-sputtered TiN coatings exhibited dense columnar morphology, a single NaCl-type cubic crystalline phase with strong (220) texture, and good adhesion property. The two coatings showed similar dry sliding friction coefficient of 0.8 – 0.9 and comparable wear coefficient in the range of 1 – 2× 10-15 m3N-1m-1. The overall deposition rate of the hybrid sputtering, being 0.047 μm/min as measured in this study, was governed predominantly by the three DC magnetrons whereas the HIPIMS only made a marginal contribution. However, the incorporated HIPIMS has been found to lead to remarkable reduction of the compressive residual stress from -6.0 to -3.5 GPa and a slight increase in the coating hardness from 34.8 to 38.0 GPa

    Does codetermination affect the composition of variable versus fixed parts of executive compensation?

    Full text link
    Contrary to previous literature we hypothesize that interests of labor may well – like that of shareholders – aim at securing the long-run survival of the firm. Consequently, employee representatives on the supervisory board could well have an interest in increasing incentive-based compensation to avoid excessive risk taking and short-run orientated decisions. We compile unique panel data on executive compensation over the periods 2006 to 2011 for 405 listed companies and use a Hausman-Taylor approach to estimate the effect of codetermination on the compensation design. Finally, codetermination has a significantly positive effect on performance-based components of compensation, which supports our hypothesis

    Equity Ownership Strategy in Greenfield Investments : Influences of Host Country Infrastructure and MNE Resources in Emerging Markets

    Get PDF
    This chapter addresses equity ownership strategy in greenfield investments by multinational enterprises (MNEs) in the emerging markets (EMs). It is one of the few studies to hypothesize and analyze influences of host EM physical infrastructure in relation to investment decisions of MNEs. We use resource dependence theory (RDT) as a theoretical basis and test the moderating effects of firm resources like size and host country investment experience. Moreover, the current study assumes a more nuanced approach to studying equity ownership by analyzing wholly owned subsidiaries versus joint ventures (JVs) and including majority versus minority JVs in the analysis as well. The empirical results based on greenfield investments undertaken by Nordic (Danish, Finnish, Norwegian, and Swedish) MNEs in EMs during 1990–2015 reveals the importance of host country physical infrastructure for high equity ownership strategy. Moreover, host country investment experience moderates the effect of physical infrastructure on equity ownership strategy. Finally, the analysis of a sub-sample of greenfield JVs reveals that determinants of equity ownership strategy differ somewhat between greenfield JV or greenfield wholly owned subsidiaries (WOS).© The Author(s) 2019.fi=vertaisarvioitu|en=peerReviewed

    Chemical Additives for Corrosion Control in Desalination Plants

    Get PDF
    The addition of chemical additives has been considered as a standard operation in water treatment systems. This chapter discusses the chemical additives used for the control of corrosion in desalination systems. Specifically, corrosion inhibitors for various metallurgies, biocides, and oxygen scavengers are covered. The pros and cons of the additive chemicals have been highlighted. The need to utilize green corrosion inhibitors based on plants and ionic liquids materials have been emphasized. This class of materials are environmentally friendly, cheap, and readily available

    Development of an environmental impact assessment and decision support system for seawater desalination plants

    No full text
    Seawater desalination is a rapidly growing coastal-based industry. The combined production capacity of all seawater desalination plants worldwide has increased by 30% over the last two years: from 28 million cubic meters per day in 2007—which is the equivalent of the average discharge of the River Seine at Paris—to more than 36 million cubic meters per day in 2009. Seawater desalination is an energy-intensive process. It furthermore consumes considerable amounts of natural resources in the form of chemicals and materials, and may have negative effects on the marine environment due to the discharges of concentrate waste waters and residual chemicals into the sea. The growing number of desalination plants worldwide and the increasing size of single facilities emphasizes the need for greener desalination technologies and more sustainable desalination projects. Two complementing approaches are the development and implementation of best available technology (BAT) standards and best practice guidelines for environmental impact assessment (EIA) studies. While BAT is a technology-based approach, which favors state of the art technologies that reduce resource consumption and waste emissions, EIA aims at minimizing impacts at a site- and project-specific level through environmental monitoring, evaluation of impacts, and mitigation where necessary. The dissertation contains a comprehensive evaluation and synthesis of the potential environmental impacts of desalination plants, with emphasis on the marine environment and aspects of energy use, followed by the development of strategies for impact mitigation. A concept for BAT for seawater desalination technologies is proposed, in combination with a methodological approach for the EIA of desalination projects. The scope of the EIA studies are outlined, including environmental monitoring, toxicity and hydrodynamic modeling studies, and the usefulness of multi-criteria analysis as a decision support tool for EIAs is explored and used to compare different intake and pretreatment options for seawater reverse osmosis plants.Water ManagementCivil Engineering and Geoscience
    • …
    corecore