La Ingeniería Divertida: Gravity Challenge.

La competición se utiliza en muchos entornos educativos, especialmente en el ámbito anglosajón, como medio para contribuir al desarrollo de las habilidades de los alumnos, aspecto este que se encuentra íntimamente ligado a la adquisición de determinadas competencias profesionales. En el sector de la ingeniería y arquitectura resulta de gran importancia y por ello, la Universidad Politécnica de Madrid ha organizado durante el curso 2006‐07 un conjunto de competiciones de estudiantes muy diversas. Una de estas competiciones es la denominada GRAVITY CHALLENGE, en la que los equipos participantes se enfrentaban al reto de lanzar un huevo desde una altura de 15 metros y conseguir que aterrice en el suelo sin romperse. Los equipos ganadores serían aquellos que lograsen este objetivo de la forma más creativa. En este trabajo se describe el procedimiento seguido para la organización de esta competición en la que participaron 27 equipos de distintas universidades. También se presentan los resultados y se hace una reflexión sobre los objetivos formativos que consideramos alcanzados

A case of atypical disseminated herpes simplex virus 1 with hepatitis in a liver transplant recipient: the need for dermatologic evaluation

Disseminated herpes simplex virus (HSV) is mainly seen in immunocompromised individuals. Atypical lesions can be present in both primary infection and reactivation disease. Compared with the general population, inmunocompromised hosts are at greater risk of increased persistency and severity of clinical manifestations, including severe systemic involvement such as esophagitis, meningitis, and hepatitis. Herein, we report the case of a liver transplant recipient with atypical disseminated herpes simplex virus-1 complicated by HSV-related hepatitis. Dermatological consultation and histological assessment were crucial for a correct diagnosis and treatment

Expert System Design for Sewage Treatment Plant

Peer ReviewedPostprint (published version

Mechanical behavior of alkali-cement as function of the temperature.

This investigation reports on a comparative study of the mechanical behavior at different temperatures of three different alkali-activated fly ash pastes chemically activated using sodium silicate. A control Portland cement (OPC) was used as a reference. In an attempt to simulate the conditions prevailing in the event of accidental fire, post-thermal mechanical tests were performed to determine the residual strength. It has therefore been established that FA based cements can be fabricated for construction purposes and these materials have great potential for fire resistance applications

Paper-based chromatic toxicity bioassay by analysis of bacterial ferricyanide reduction

Water quality assessment requires a continuous and strict analysis of samples to guarantee compliance with established standards. Nowadays, the increasing number of pollutants and their synergistic effects lead to the development general toxicity bioassays capable to analyse water pollution as a whole. Current general toxicity methods, e.g. Microtox®, rely on long operation protocols, the use of complex and expensive instrumentation and sample pre-treatment, which should be transported to the laboratory for analysis. These requirements delay sample analysis and hence, the response to avoid an environmental catastrophe. In an attempt to solve it, a fast (15 min) and low-cost toxicity bioassay based on the chromatic changes associated to bacterial ferricyanide reduction is here presented. E. coli cells (used as model bacteria) were stably trapped on low-cost paper matrices (cellulose-based paper discs, PDs) and remained viable for long times (1 month at -20 °C). Apart from bacterial carrier, paper matrices also acted as a fluidic element, allowing fluid management without the need of external pumps. Bioassay evaluation was performed using copper as model toxic agent. Chromatic changes associated to bacterial ferricyanide reduction were determined by three different transduction methods, i.e. (i) optical reflectometry (as reference method), (ii) image analysis and (iii) visual inspection. In all cases, bioassay results (in terms of half maximal effective concentrations, EC50) were in agreement with already reported data, confirming the good performance of the bioassay. The validation of the bioassay was performed by analysis of real samples from natural sources, which were analysed and compared with a reference method (i.e. Microtox). Obtained results showed agreement for about 70% of toxic samples and 80% of non-toxic samples, which may validate the use of this simple and quick protocol in the determination of general toxicity. The minimum instrumentation requirements and the simplicity of the bioassay open the possibility of in-situ water toxicity assessment with a fast and low-cost protocolPostprint (author's final draft

The Holocene Cedrus pollen record from Sierra Nevada (S Spain), a proxy for climate change in N Africa

Comprehending the effects of climate variability and disturbance on forested ecosystems is paramount to successfully managing forest environments under future climate scenarios (e.g., global warming, aridi-fication increase). Changes in fossil pollen abundance in sedimentary archives record past vegetation dynamics at regional scales, mainly related to climate changes and, in the last few millennia, to human impact. Pollen records can thus provide long databases with information on how the environment reacted to climate change before the historical record. In this study, we synthesized fossil pollen data from seven sites from the Sierra Nevada in southern Spain to investigate the response of forests in the western Mediterranean area to millennial-scale climate changes and to human impact during the Holocene. In particular, here we focused on Cedrus pollen abundances, which most-likely originated from Northern Africa and were carried to Sierra Nevada by wind. Cedrus pollen has received little attention in the Iberian Peninsula palynological records, for it occurs in low concentrations and has an African source, and thus this article explores the potential to reconstruct its past history and climate. Although Cedrus abundances are generally lower than 1% in the studied pollen samples, a comparison with North African (Moroccan) Cedrus pollen records shows similar trends at long- and short-term time-scales. Therefore, this record could be used as a proxy for changes in this forest species in North Africa. As observed in the Sierra Nevada synthetic record, the increasing trend of Cedrus pollen during the Middle and Late Holocene closely correlates with decreasing summer insolation. This would have produced overall cooler annual temperatures in Northern Africa (Middle Atlas and Rif Mountains) as well as lower summer evaporation, benefiting the growth of this cool-adapted montane tree species while increasing available moisture during the summer, which is critical for this water-demanding species. Millennial-scale variability also characterizes the Sierra Nevada Cedrus synthetic pollen record. Cedrus abundance oscillations co-vary with well-known millennial-scale climatic variability that controlled cedar abundance and altitudinal distribution in montane areas of N Africa. (C) 2020 Elsevier Ltd. All rights reserved.Peer reviewe

Cosmic Chronometers: Constraining the Equation of State of Dark Energy. I: H(z) Measurements

We present new determinations of the cosmic expansion history from red-envelope galaxies. We have obtained for this purpose high-quality spectra with the Keck-LRIS spectrograph of red-envelope galaxies in 24 galaxy clusters in the redshift range 0.2 < z < 1.0. We complement these Keck spectra with high-quality, publicly available archival spectra from the SPICES and VVDS surveys. We improve over our previous expansion history measurements in Simon et al. (2005) by providing two new determinations of the expansion history: H(z) = 97 +- 62 km/sec/Mpc at z = 0.5 and H(z) = 90 +- 40 km/sec/Mpc at z = 0.8. We discuss the uncertainty in the expansion history determination that arises from uncertainties in the synthetic stellar-population models. We then use these new measurements in concert with cosmic-microwave-background (CMB) measurements to constrain cosmological parameters, with a special emphasis on dark-energy parameters and constraints to the curvature. In particular, we demonstrate the usefulness of direct H(z) measurements by constraining the dark- energy equation of state parameterized by w0 and wa and allowing for arbitrary curvature. Further, we also constrain, using only CMB and H(z) data, the number of relativistic degrees of freedom to be 4 +- 0.5 and their total mass to be < 0.2 eV, both at 1-sigma.Comment: Submitted to JCA

Ianus: an Adpative FPGA Computer

Dedicated machines designed for specific computational algorithms can outperform conventional computers by several orders of magnitude. In this note we describe {\it Ianus}, a new generation FPGA based machine and its basic features: hardware integration and wide reprogrammability. Our goal is to build a machine that can fully exploit the performance potential of new generation FPGA devices. We also plan a software platform which simplifies its programming, in order to extend its intended range of application to a wide class of interesting and computationally demanding problems. The decision to develop a dedicated processor is a complex one, involving careful assessment of its performance lead, during its expected lifetime, over traditional computers, taking into account their performance increase, as predicted by Moore's law. We discuss this point in detail

Evaluation of native microalgae from Tunisia using the pulse-amplitude-modulation measurement of chlorophyll fluorescence and a performance study in semi-continuous mode for biofuel production

Background: Microalgae are attracting much attention as a promising feedstock for renewable energy production, while simultaneously providing environmental benefits. So far, comparison studies for microalgae selection for this purpose were mainly based on data obtained from batch cultures, where the lipid content and the growth rate were the main selection parameters. The present study evaluates the performance of native microalgae strains in semi-continuous mode, considering the suitability of the algal-derived fatty acid composition and the saponifiable lipid productivity as selection criteria for microalgal fuel production. Evaluation of the photosynthetic performance and the robustness of the selected strain under outdoor conditions was conducted to assess its capability to grow and tolerate harsh environmental growth conditions. Results: In this study, five native microalgae strains from Tunisia (one freshwater and four marine strains) were isolated and evaluated as potential raw material to produce biofuel. Firstly, molecular identification of the strains was performed. Then, experiments in semi-continuous mode at different dilution rates were carried out. The local microalgae strains were characterized in terms of biomass and lipid productivity, in addition to protein content, and fatty acid profile, content and productivity. The marine strain Chlorella sp. showed, at 0.20 1/day dilution rate, lipid and biomass productivities of 35.10 mg/L day and 0.2 g/L day, respectively. Moreover, data from chlorophyll fluorescence measurements demonstrated the robustness of this strain as it tolerated extreme outdoor conditions including high (38 ° C) and low (10 ° C) temperature, and high irradiance (1600 µmol/m2 s). Conclusions: Selection of native microalgae allows identifying potential strains suitable for use in the production of biofuels. The selected strain Chlorella sp. demonstrated adequate performance to be scaled up to outdoor conditions. Although experiments were performed at laboratory conditions, the methodology used in this paper allows a robust evaluation of microalgae strains for potential market applications.This study was supported by the Marine Microalgae Biotechnology Group at the University of Almer'a (BIO 173) and the Campus de Excelencia Internacional Agroalimentario (ceiA3) within the joint framework of supervised theses between the University of Almeria, Spain and the University of Sfax, Tunisia.Scopu

Manganese oxides as biominerals in a granitic subterranean environment

Black coatings were detected on granite surfaces in groundwater catch work tunnels from Porto city (NW Portugal). XRD, FTIR, Micro-Raman, ICP-MS, TEM-EDS, SEM-EDS and SEM-FIB were the analytical procedures carried out to investigate the origin of the black coatings. In this subterranean environment, the enrichment in metals and other trace elements, such as Mn and Fe, and clay minerals characterize the black microbial mats, mainly composed of Mn/Fe-oxidising bacteria.Fundação para a Ciência e a Tecnologia (FCT